[daip] VLARUN - CATALOG ENTRY NOT FOUND

[Edmund M. Douglass]

Hello,
I seem to be encountering an unfamiliar problem when running VLARUN.  It
ends after printing the message "CATALOG ENTRY NOT FOUND"  from TABGET. 
Does this mean that I am missing some model file?  As a test I've tried to
run VLARUN with data sets that had previously run cleanly through it.  But
they are causing the same error.   I don't know what I could have done to
cause this problem between when they ran successfully and now.  I would
greatly appreciate any help you have to offer.

Attached are my VLARUN inputs.  Below is the output.

Thank you,
Ned Douglass
Boston University


>vlarun
AIPS 1: Got(1)   disk= 1  user=1066   type=UV   19860825.L BAND.1
AIPS 1: Got(1)   disk= 1  user=1066   type=UV   19860825.L BAND.1
AIPS 1: '10 SECOND INTEGRATIONS (GUESS)'
AIPS 1: Extension file type SN version   1 deleted
AIPS 1: Extension file type PL version   1 DISK FILE MISSING
AIPS 1: 'DONE CLEANUP OF OLD TABLE EXTENTION FILES (CL,SN,FG,BP,PL,XX)'
SETJY1: Task SETJY  (release of 31DEC08) begins
SETJY1: / Resetting flux information to zero
SETJY1: BIF =  1 EIF =  2 /Range of IFs
SETJY1: SOURCES = ''     /All sources selected
SETJY1: Appears to have ended successfully
SETJY1: localhost    31DEC08 TST: Cpu=       0.0  Real=       0
AIPS 1: Resumes
SETJY1: Task SETJY  (release of 31DEC08) begins
SETJY1: A source model for this calibrator may be available
SETJY1: Use the verb CALDIR to see if there is one
SETJY1: A source model for this calibrator may be available
SETJY1: Use the verb CALDIR to see if there is one
SETJY1: / Flux calculated using known spectrum
SETJY1: BIF =  1 EIF =  2 /Range of IFs
SETJY1: '3C48            ' IF =  1 FLUX =15.4935 (Jy calcd)
SETJY1: '3C48            ' IF =  2 FLUX =15.0843 (Jy calcd)
SETJY1: / Using (1999.2) VLA or Reynolds (1934-638) coefficients
SETJY1: Appears to have ended successfully
SETJY1: localhost    31DEC08 TST: Cpu=       0.0  Real=       0
AIPS 1: Resumes
CALIB1: Task CALIB  (release of 31DEC08) begins
CALIB1: CALIB USING 19860825     . L BAND .   1 DISK=  1 USID=1066
CALIB1: L1 Solution type
CALIB1: UVGET: Using flag table version   2 to edit data
CALIB1: Selecting, editing and calibrating the data
CALIB1: Doing cal transfer mode with point model for each source
CALIB1: This is not self-calibration
CALIB1: Dividing data by source flux densities
CALIB1: Determining solutions
CALIB1: Writing SN table    1
CALIB1: Found         3244 good solutions
CALIB1: Failed on      140 solutions
CALIB1: Average closure rms =  0.0369 +-  0.0136
CALIB1: Fraction of times having data >  2.5 rms from solution
CALIB1: 0.00735 of the times had  0 -  2 percent outside  2.5 times rms
CALIB1: 0.04412 of the times had  2 -  4 percent outside  2.5 times rms
CALIB1: 0.03676 of the times had  4 -  6 percent outside  2.5 times rms
CALIB1: 0.00735 of the times had  6 -  8 percent outside  2.5 times rms
CALIB1: 0.05882 of the times had  8 - 10 percent outside  2.5 times rms
CALIB1: 0.30147 of the times had 10 - 12 percent outside  2.5 times rms
CALIB1: 0.35294 of the times had 12 - 14 percent outside  2.5 times rms
CALIB1: 0.15441 of the times had 14 - 16 percent outside  2.5 times rms
CALIB1: 0.02206 of the times had 16 - 18 percent outside  2.5 times rms
CALIB1: Appears to have ended successfully
CALIB1: localhos 31DEC08 TST: Cpu=      1.5  Real=      4  IO=        21
AIPS 1: Resumes
AIPS 1: '3C48 MODEL ='     '3C48_L'
AIPS 1: SYSTEM command to be executed is:
AIPS 1: ls -1 $AIPSTARS/3C48_L.MODEL >& /dev/null
CALRD1: Task CALRD  (release of 31DEC08) begins
CALRD1: Reading disk file AIPSTARS:3C48_L.MODEL
CALRD1: Create 3C48_L      .MODEL .  10 (MA)  on disk  1  cno   11
CALRD1: Appears to have ended successfully
CALRD1: localhost    31DEC08 TST: Cpu=       0.0  Real=       1
AIPS 1: Resumes
AIPS 1: CATALOG ENTRY NOT FOUND
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: VLARUN_inp.txt
URL: <http://listmgr.nrao.edu/pipermail/daip/attachments/20090223/9ccccab4/attachment.txt>