[daip] curious iring problem
Eric Greisen
egreisen at nrao.edu
Thu Jul 12 11:11:49 EDT 2012
Lawrence Rudnick wrote:
> Eric - curious IRING problem. I get all zeros for valid pixels on this
> image; very similar images successful in past, but something not
> working here. they were constructed outside of AIPS from GBT data.
> Same problem on 31DEC11 at Minnesota and 31DEC12 (I assume) on alcor at AOC.
>
> Following are the IRING inputs.
>
> The map in question is in /users/lrudnick/A2142_GB_DESTRIPE.FITS
>
> thanks.
>
> larry
>
> AIPS 1: IRING: Task to integrate in confocal ellipses.
> AIPS 1: Adverbs Values Comments
> AIPS 1: ----------------------------------------------------------------
> AIPS 1: USERID 0 User ID - ignored
> AIPS 1: INNAME 'A2142' Image name (name)
> AIPS 1: INCLASS 'DESTRP' Image name (class)
> AIPS 1: INSEQ 1 Image name (seq. #)
> AIPS 1: INDISK 1 Disk drive #
> AIPS 1: BLC 50.4 3.2 Bottom left corner of image
> AIPS 1: 1 1 0=>entire image
> AIPS 1: 1 1 1
> AIPS 1: TRC 85.8 37.2 Top right corner of image
> AIPS 1: 1 1 0=>entire image
> AIPS 1: 1 1 1
> AIPS 1: APARM -7 33 Orientation parameters:
> AIPS 1: *rest 0 1: x - coordinate center wrt
> AIPS 1: reference point in pixels
> AIPS 1: 2: y - coordinate center wrt
> AIPS 1: reference point in pixels
> AIPS 1: 3: position angle major axis,
> AIPS 1: degrees
> AIPS 1: 4: inclination of rings
> AIPS 1: to plane of sky, deg.
> AIPS 1: 5: full range of azimuthal
> AIPS 1: angles to consider, deg.
> AIPS 1: 0 => 360 degrees
> AIPS 1: 6: central azimuthal angle
> AIPS 1: of the range specified in
> AIPS 1: APARM(5), deg.
> AIPS 1: CPARM 0 2000 Specification of rings:
> AIPS 1: 60 0 1 : radius inner ring (")
> AIPS 1: 1 *rest 0 2 : radius outer ring (")
> AIPS 1: 3 : width of each ring (")
> AIPS 1: 4 : 1=>treat blanks as zero
> AIPS 1: 5 : 1=>plot radial intensity
> AIPS 1: 2=>plot integrated
> AIPS 1: radial intensity, from
> AIPS 1: inner ring outwards.
> AIPS 1: 6 : 1 => CPARM(1-3) in pixels
> AIPS 1: 7 : scale X axis by CPARM(7)
> AIPS 1: 8 > 0 => y limits in 9, 10
> AIPS 1: KEYSTRNG ' ' X axis type if CPARM(7) > 0
> AIPS 1: SYMBOL 0 Plot symbol number: 1 - 24
> AIPS 1: FACTOR 0 Scale plot symbols by FACTOR
> AIPS 1: <0 => connect points too
> AIPS 1: DOTV 1 > 0 Do plot on the TV, else
> AIPS 1: make a plot file
> AIPS 1: GRCHAN 0 Graphics channel 0 => 1.
> AIPS 1: OUTTEXT *all ' ' Not blank => write list x,y
> AIPS 1: plot points to text file
>
> _______________________________________________
> Daip mailing list
> Daip at listmgr.cv.nrao.edu
> http://listmgr.cv.nrao.edu/mailman/listinfo/daip
Your image has a Y reference pixel of 56 which is off the image above
it. the real object is probably at -7,-33 not -7,+33
IRING gave nice results in that case.
Eric
More information about the Daip
mailing list