[daip] Closure plots (missing x-axis labels)
Michael Rupen
mrupen at nrao.edu
Mon Jul 27 10:37:38 EDT 2009
Hi Eric,
interesting...I see this (no x-axis labels on last CL/CAPLT, if I wind
up with fewer than max plots on that page) quite consistently. I tried
this again this morning on both casa-dev-16 and scamper. Below I show
the scamper results -- feel free to log in and check for yourself...
Cheers,
Michael
1- CLPLT on scamper, user 666:
>inp
AIPS 1: CLPLT Plots data from a u,v data base, model from a CC file
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 File owner number - ignored
AIPS 1: INNAME '20090714' Input UV file name (name)
AIPS 1: INCLASS 'C BAND' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1: IN2NAME ' ' Input CC file name (name)
AIPS 1: ' ' => no model
AIPS 1: IN2CLASS ' ' Input CC file name (class)
AIPS 1: ' ' => no model
AIPS 1: IN2SEQ 0 Input CC file name (seq. #)
AIPS 1: IN2DISK 0 Input CC file disk unit #
AIPS 1: IN2VERS 0 Input CC file version #
AIPS 1: NCOMP *all 0 # comps to use for model.
AIPS 1: 1 value per field
AIPS 1: FLUX 0 Lowest CC component used.
AIPS 1: NMAPS 0 # clean maps (fields).
AIPS 1: 0 => no model
AIPS 1: Data selection:
AIPS 1: SOURCES *all ' ' Source list
AIPS 1: QUAL -1 Source qualifier -1=>all
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: BCHAN 129 Low channel # averaged 0=>1
AIPS 1: ECHAN 129 High channel # averaged
AIPS 1: BIF 2 Low IF # averaged 0=>1
AIPS 1: EIF 2 High IF # averaged 0=>max
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1
AIPS 1: UVRANGE 0 0 Range of projected spacings
AIPS 1: (thousands of wavelengths)
AIPS 1: TIMERANG 0 18 Time: start day,hr,min,sec
AIPS 1: 10 0 stop day,hr,min,sec.
AIPS 1: 0 18 15 0
AIPS 1: STOKES ' ' Stokes' parameters
AIPS 1: TRIANGLE *all 0 Closure triangles to plot.
AIPS 1: See HELP.
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 1 CL (or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: FLAGVER 1 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER 1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: SUBARRAY 0 Subarray number 0=all.
AIPS 1: DOEBAR -1 If > 0, plot error bars,
AIPS 1: else don't
AIPS 1: SOLINT 0.01667 Time interval over which to
AIPS 1: average data in order to
AIPS 1: form closure phase (mins).
AIPS 1: See HELP for hints on how
AIPS 1: to use this.
AIPS 1: OPCODE 'INDE' If OPCODE = 'INDE' will plot
AIPS 1: all independent closure
AIPS 1: phases.
AIPS 1: IF OPCODE = ' ' will plot all
AIPS 1: closure phases, or all
AIPS 1: closure phases specified by
AIPS 1: the TRIANGLE adverb.
AIPS 1: See HELP for more info.
AIPS 1: PHSLIMIT 0 Plot only those triangles
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: exceeding plus/minus PHSLIMIT
AIPS 1: BPARM *all 0 Control parameters
AIPS 1: 1 : 1 => x-axis is UTC
AIPS 1: or IAT (depending on
AIPS 1: time system in data.)
AIPS 1: : 2 => x-axis is GST
AIPS 1: 0 => 1
AIPS 1: 2 : not used
AIPS 1: 3 : >0.0 => fixed scale
AIPS 1: <0.0 => fixed range
AIPS 1: 0.0 => sep. scales
AIPS 1: 4 : Xmin (fixed scale)
AIPS 1: 5 : Xmax (fixed scale)
AIPS 1: 6 : Ymin (fixed scale)
AIPS 1: 7 : Ymax (fixed scale)
AIPS 1: 8 : Max no. plots/page.
AIPS 1: 9 > 0 -> plot models for
AIPS 1: baselines with no data
AIPS 1: 10: Array type:
AIPS 1: 0 = VLBI and EVLA
AIPS 1: 1 = VLA and ATCA;
AIPS 1: POLPLOT ' ' Option to display various
AIPS 1: combinations of polzns to
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: plot: 'RL/RR', 'RL/LL',
AIPS 1: 'LR/RR', 'LR/LL', 'RR/LL'
AIPS 1: 'LL/RR'; other = don't use
AIPS 1: this option.
AIPS 1: SYMBOL 0 Symbol to use when plotting.
AIPS 1: 0 => Vertical line
AIPS 1: 1 - 24, standard types
AIPS 1: FACTOR 0.3 Scale symbol plotted
AIPS 1: LTYPE 3 Type of labeling: 1 border,
AIPS 1: 2 no ticks, 3 - 6 standard,
AIPS 1: 7 - 10 only tick labels
AIPS 1: <0 -> no date/time
AIPS 1: DOTV -1 > 0 Do plot on the TV, else
AIPS 1: make a plot file
AIPS 1: GRCHAN 0 Graphics channel 0 => 1.
>
>go
CLPLT1: Task CLPLT (release of 31DEC09) begins
CLPLT1: UVGET: Using flag table version 1 to edit data
CLPLT1: 17 closure triangles contain data, all independent
CLPLT1: PLot file version 7 created.
CLPLT1: PLOTCL: 298 points plotted: triangle 1- 2- 3
CLPLT1: PLOTCL: 297 points plotted: triangle 1- 2- 9
CLPLT1: PLOTCL: 298 points plotted: triangle 2- 3- 9
CLPLT1: GFINIS: number records used 28
CLPLT1: PLot file version 8 created.
CLPLT1: PLOTCL: 298 points plotted: triangle 1- 2-18
CLPLT1: PLOTCL: 297 points plotted: triangle 2- 3-18
CLPLT1: PLOTCL: 299 points plotted: triangle 1- 2-19
CLPLT1: GFINIS: number records used 28
CLPLT1: PLot file version 9 created.
CLPLT1: PLOTCL: 298 points plotted: triangle 2- 3-19
CLPLT1: PLOTCL: 298 points plotted: triangle 1- 2-23
CLPLT1: PLOTCL: 298 points plotted: triangle 2- 3-23
CLPLT1: GFINIS: number records used 28
CLPLT1: PLot file version 10 created.
CLPLT1: PLOTCL: 298 points plotted: triangle 18-19-23
CLPLT1: PLOTCL: 298 points plotted: triangle 1- 2-24
CLPLT1: PLOTCL: 297 points plotted: triangle 2- 3-24
CLPLT1: GFINIS: number records used 28
CLPLT1: PLot file version 11 created.
CLPLT1: PLOTCL: 298 points plotted: triangle 18-19-24
CLPLT1: PLOTCL: 297 points plotted: triangle 1- 2-25
CLPLT1: PLOTCL: 297 points plotted: triangle 2- 3-25
CLPLT1: GFINIS: number records used 28
CLPLT1: PLot file version 12 created.
CLPLT1: PLOTCL: 298 points plotted: triangle 18-19-25
CLPLT1: PLOTCL: 299 points plotted: triangle 23-24-25
CLPLT1: GFINIS: number records used 19
CLPLT1: Appears to have ended successfully
CLPLT1: scamper 31DEC09 TST: Cpu= 1.2 Real= 3 IO= 2939
See attached plver 12 showing no x-axis labels.
2- CAPLT
>inp
AIPS 1: CAPLT Plots closure amplitides from uv data base and model
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 File owner number - ignored
AIPS 1: INNAME '20090714' Input UV file name (name)
AIPS 1: INCLASS 'C BAND' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1: IN2NAME ' ' Input CC file name (name)
AIPS 1: ' ' => no model
AIPS 1: IN2CLASS ' ' Input CC file name (class)
AIPS 1: ' ' => no model
AIPS 1: IN2SEQ 0 Input CC file name (seq. #)
AIPS 1: IN2DISK 0 Input CC file disk unit #
AIPS 1: IN2VERS 0 Input CC file version #
AIPS 1: NCOMP *all 0 # comps to use for model.
AIPS 1: 1 value per field
AIPS 1: FLUX 0 Lowest CC component used.
AIPS 1: NMAPS 0 # clean maps (fields).
AIPS 1: 0 => no model
AIPS 1: Data selection:
AIPS 1: SOURCES *all ' ' Source list
AIPS 1: QUAL -1 Source qualifier -1=>all
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: BCHAN 129 Low channel # averaged 0=>1
AIPS 1: ECHAN 129 High channel # averaged
AIPS 1: BIF 2 Low IF # averaged 0=>1
AIPS 1: EIF 2 High IF # averaged 0=>max
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1
AIPS 1: UVRANGE 0 0 Range of projected spacings
AIPS 1: (thousands of wavelengths)
AIPS 1: TIMERANG 0 18 Time: start day,hr,min,sec
AIPS 1: 10 0 stop day,hr,min,sec.
AIPS 1: 0 18 15 0
AIPS 1: STOKES ' ' Stokes' parameters
AIPS 1: TRIANGLE *all 0 Closure quadrangles to plot
AIPS 1: See HELP.
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 1 CL (or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: FLAGVER 1 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER 1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: SUBARRAY 0 Subarray number 0=all.
AIPS 1: DOEBAR -1 If > 0, plot error bars,
AIPS 1: else don't
AIPS 1: SOLINT 0.01667 Time interval over which to
AIPS 1: average data in order to
AIPS 1: form closure amplitude (mins)
AIPS 1: See HELP for hints on how
AIPS 1: to use this.
AIPS 1: OPCODE 'INDE' If OPCODE = 'INDE' will plot
AIPS 1: all independent closure
AIPS 1: amplitudes.
AIPS 1: If OPCODE = ' ' will plot all
AIPS 1: closure amplitudes, or all
AIPS 1: closure amplitudes specified
AIPS 1: by the TRIANGLE adverb.
AIPS 1: See HELP for more info.
AIPS 1: PHSLIMIT 0 Plot only those quadrangles
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: exceeding PHSLIMIT
AIPS 1: BPARM 0 0 Control parameters
AIPS 1: 0 0 1 : 1 => x-axis is UTC
AIPS 1: 0 0 or IAT (depending on
AIPS 1: 0 4 time system in data.)
AIPS 1: 0 0 : 2 => x-axis is GST
AIPS 1: 0 => 1
AIPS 1: 2 : not used
AIPS 1: 3 : >0.0 => fixed scale
AIPS 1: <0.0 => fixed range
AIPS 1: 0.0 => sep. scales
AIPS 1: 4 : Xmin (fixed scale)
AIPS 1: 5 : Xmax (fixed scale)
AIPS 1: 6 : Ymin (fixed scale)
AIPS 1: 7 : Ymax (fixed scale)
AIPS 1: 8 : Max no. plots/page.
AIPS 1: 9 > 0 -> plot models for
AIPS 1: baselines with no data
AIPS 1: 10: Array type:
AIPS 1: 0 = VLBI and EVLA
AIPS 1: 1 = VLA and ATCA;
AIPS 1: POLPLOT ' ' Option to display various
AIPS 1: combinations of polzns to
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: plot: 'RL/RR', 'RL/LL',
AIPS 1: 'LR/RR', 'LR/LL', 'RR/LL'
AIPS 1: 'LL/RR'; other = don't use
AIPS 1: this option.
AIPS 1: SYMBOL 0 Symbol to use when plotting.
AIPS 1: 0 => Vertical line
AIPS 1: 1 - 24, standard types
AIPS 1: FACTOR 0.3 Scale symbol plotted
AIPS 1: LTYPE 3 Type of labeling: 1 border,
AIPS 1: 2 no ticks, 3 - 6 standard,
AIPS 1: 7 - 10 only tick labels
AIPS 1: <0 -> no date/time
AIPS 1: DOTV -1 > 0 Do plot on the TV, else
AIPS 1: make a plot file
AIPS 1: GRCHAN 2 Graphics channel 0 => 1.
>
>go
CAPLT1: Task CAPLT (release of 31DEC09) begins
CAPLT1: UVGET: Using flag table version 1 to edit data
CAPLT1: 6 closure quadrangles contain data, all independent
CAPLT1: PLot file version 13 created.
CAPLT1: PLOTCL: 298 points plotted: quadrangle 1- 2- 3- 9
CAPLT1: PLOTCL: 297 points plotted: quadrangle 1- 2- 3-18
CAPLT1: PLOTCL: 299 points plotted: quadrangle 1- 2- 3-19
CAPLT1: PLOTCL: 299 points plotted: quadrangle 1- 2- 3-23
CAPLT1: GFINIS: number records used 36
CAPLT1: PLot file version 14 created.
CAPLT1: PLOTCL: 297 points plotted: quadrangle 1- 2- 3-24
CAPLT1: PLOTCL: 297 points plotted: quadrangle 1- 2- 3-25
CAPLT1: GFINIS: number records used 19
CAPLT1: Appears to have ended successfully
CAPLT1: scamper 31DEC09 TST: Cpu= 0.4 Real= 1 IO= 1143
AIPS 1: Resumes
See attached plver=14, showing no x-axis labels.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: foreric.ps
Type: application/postscript
Size: 37388 bytes
Desc: foreric.ps
URL: <http://listmgr.nrao.edu/pipermail/daip/attachments/20090727/559a738b/attachment.ps>
More information about the Daip
mailing list