[daip] AG776: Question about error messages in FILLM
Ciriaco Goddi
cgoddi at cfa.harvard.edu
Mon Mar 3 15:06:07 EST 2008
Hello Eric,
I checked the TY and I actually found out that whereas all other
frequencies had values of sensitivity ~0.5-1 K, the IF2 shows much higher
values, from ~3K in some antennas and polarization to completely crazy
values in some others (GK!). So, the problem is not (only) that of antenna
8 . Do you think that the online system flagged all data from IF2, based
on the wrong Tsys values?
Best,
Ciriaco
----------------------------------------------------------------------------
Ciriaco Goddi
Postdoc Fellow
Harvard-Smithsonian Center for Astrophysics
Radio and Geoastronomy Division
60 Garden St. MS 42, Cambridge, MA 02138
http://cfa-www.harvard.edu/
Ph: 617-496-7636, Fax: 617-495-7345
On Mon, 3 Mar 2008, Eric Greisen wrote:
> Ciriaco Goddi writes:
>
> > FILLM1 16:55:05 MCWAIT: Factor error; C( 2)= 0.107E+00 * C( 8)=
> > 0.138E-09
> > FILLM1 16:55:05 MCWAIT: IF = 2, FREQ = 1, IS = 3, STRM= 1
> > FILLM1 16:55:05 MCWAIT: IF inc= 12, FREQ inc= 24, POL inc= 3
> > FILLM1 16:55:05 MCWAIT: Factor error; C( 2)= 0.355E+00 * C( 8)=
> > 0.138E-09
> > FILLM1 16:55:05 MCWAIT: IF = 2, FREQ = 1, IS = 3, STRM= 1
> > FILLM1 16:55:05 MCWAIT: IF inc= 12, FREQ inc= 24, POL inc= 3
> > FILLM1 16:55:05 MCWAIT: Factor error; C( 4)= 0.628E+00 * C( 8)=
> > 0.138E-09
> > FILLM1 16:55:05 MCWAIT: IF = 2, FREQ = 1, IS = 2, STRM= 1
> > FILLM1 16:55:05 MCWAIT: IF inc= 12, FREQ inc= 24, POL inc= 3
> > FILLM1 16:55:05 MCWAIT: Factor error; C( 4)= 0.177E-01 * C( 8)=
> > 0.138E-09
> > FILLM1 16:55:05 MCWAIT: IF = 2, FREQ = 1, IS = 2, STRM= 1
> > FILLM1 16:55:05 MCWAIT: IF inc= 12, FREQ inc= 24, POL inc= 3
>
> This message is saying that the recorded nominal sensitivity number,
> proportional to system temperature, is in fact very large so that the
> scaling for antenna 8 is very small. Those data will be flagged (as
> they probably should be). This should not delete all of IF 2, just
> antenna 8. You can examine the TY table to see what is recorded
> there. The "TSYS" column is for the VLA the nominal sensitivity.
>
> Eric Greisen
>
More information about the Daip
mailing list