[daip] Re: DELZN problem

[Leonia Kogan]

Eric pointed out on the mistake at DELZN (the array of sources has too 
small dimension)
which corrupted OUTFILE.

I'll fix the problem and the corrected version will be available for you 
tomorrow through
MNJ

Leonia

Mark Reid wrote:

>Leonia,
>
>   I'm having a problem running DELZN.  I hope you can
>shed some light on it.  In case you need to access
>the input data, I've put it on our anonymous ftp site:
>
>   ftp cfa-ftp.harvard.edu
>   anonymous
>   email_address
>   cd outgoing/reid
>   get 2005SEP07-CA.GEODAT        (180 Mbytes)
>
>The inputs and symptoms are as follows
>
>AIPS 4: DELZN     Determines residual atmosphere depth at zenith
>AIPS 4: Adverbs     Values                 Comments
>AIPS 4:
>----------------------------------------------------------------
>AIPS 4: INNAME     '2005SEP07-CA'          Input UV file name (name)
>AIPS 4: INCLASS    'GEODAT'                Input UV file name(class)
>AIPS 4: INSEQ         1                    Input UV file name (seq.
>AIPS 4: INDISK        1                    Input UV file disk unit #
>AIPS 4: SNVER         2                    Input SN table version
>AIPS 4: GAINVER       0                    Input CL table to copy to
>AIPS 4: APARM         0           2        control parameters:
>AIPS 4:               2        *rest 0     1: what data to plot
>AIPS 4: SOURCES    *all ' '                Source list ' '=>all.
>AIPS 4: CALSOUR    *all ' '                Calibrator list ' ' =
>AIPS 4: STOKES     ' '                     Stokes type to process
>AIPS 4: SELBAND      -1                    Bandwidth to select (kHz)
>AIPS 4: SELFREQ      -1                    Frequency to select (MHz)
>AIPS 4: FREQID       -1                    Freq. ID to select,
>AIPS 4: BIF           0                    Lowest IF number 0=>all
>AIPS 4: EIF           0                    Highest IF number 0=>all
>AIPS 4: TIMERANG   *all 0                  Time range to use. 0=>all
>AIPS 4: ANTENNAS   *all 0                  Antennas to select.
>AIPS 4: SUBARRAY      0                    Subarray; 0 => 1.
>AIPS 4: NPLOTS        5                    Number of plots per page
>AIPS 4: XINC          1                    Plot every XINC'th point
>AIPS 4: OPTYPE     ' '                     What data to read from
>AIPS 4: OUTFILE    'MYDATA:DELZN.OUT'      Table of
>AIPS 4: PRTLEV        1                    0=> no printout.
>AIPS 4: DOHIST       -1                    >0 => put coefficients in
>AIPS 4: DOTV         -1                    > 0 Do plot on the TV,
>AIPS 4: GRCHAN        0                    Graphics channel 0 => 1.
>AIPS 4: BADDISK    *all 0
>
>   The output is as follows:
>
>DELZN4: Task DELZN  (release of 31DEC05) begins
>DELZN4: !!!!! center of the data is at    0.28960 !!!!!
>DELZN4: Ref ANT= 9: FITPAR 1.      -89.078
>DELZN4: Ref ANT= 9: FITPAR 2.       65.337
>DELZN4: Ref ANT= 9: FITPAR 3.        0.000
>DELZN4: Ref ANT= 9: FITPAR 4.        0.000
>DELZN4: ANT= 1: FITPAR 1.       40.762
>DELZN4: ANT= 1: FITPAR 2.      210.557
>DELZN4: ANT= 1: FITPAR 3.     -159.071
>DELZN4: ANT= 1: FITPAR 4.     -261.306
>DELZN4: Plot file version   9  created.
>DELZN4: PLTEL:        44 points plotted
>DELZN4: ANT= 2: FITPAR 1.      -25.295
>DELZN4: ANT= 2: FITPAR 2.       17.019
>DELZN4: ANT= 2: FITPAR 3.      -59.768
>DELZN4: ANT= 2: FITPAR 4.       22.595
>DELZN4: PLTEL:        54 points plotted
>DELZN4: ANT= 3: FITPAR 1.      -27.207
>DELZN4: ANT= 3: FITPAR 2.      195.289
>DELZN4: ANT= 3: FITPAR 3.      -66.178
>DELZN4: ANT= 3: FITPAR 4.     -135.167
>DELZN4: PLTEL:        49 points plotted
>DELZN4: ANT= 4: FITPAR 1.      -69.795
>DELZN4: ANT= 4: FITPAR 2.      -18.945
>DELZN4: ANT= 4: FITPAR 3.       -0.695
>DELZN4: ANT= 4: FITPAR 4.     -209.749
>DELZN4: PLTEL:        54 points plotted
>DELZN4: ANT= 5: FITPAR 1.      -87.324
>DELZN4: ANT= 5: FITPAR 2.      -52.915
>DELZN4: ANT= 5: FITPAR 3.        7.045
>DELZN4: ANT= 5: FITPAR 4.      299.385
>DELZN4: PLTEL:        54 points plotted
>DELZN4: GFINIS: number records used      27
>DELZN4: ANT= 6: FITPAR 1.       -3.527
>DELZN4: ANT= 6: FITPAR 2.      -36.928
>DELZN4: ANT= 6: FITPAR 3.      -95.922
>DELZN4: ANT= 6: FITPAR 4.    -1284.067
>DELZN4: Plot file version  10  created.
>DELZN4: PLTEL:        36 points plotted
>DELZN4: ANT= 7: FITPAR 1.      -91.266
>DELZN4: ANT= 7: FITPAR 2.       47.309
>DELZN4: ANT= 7: FITPAR 3.        0.608
>DELZN4: ANT= 7: FITPAR 4.     -208.011
>DELZN4: PLTEL:        54 points plotted
>DELZN4: ANT= 8: FITPAR 1.       41.660
>DELZN4: ANT= 8: FITPAR 2.      -17.992
>DELZN4: ANT= 8: FITPAR 3.     -104.093
>DELZN4: ANT= 8: FITPAR 4.     -991.103
>DELZN4: PLTEL:        49 points plotted
>DELZN4: ANT=10: FITPAR 1.     -182.506
>DELZN4: ANT=10: FITPAR 2.       80.810
>DELZN4: ANT=10: FITPAR 3.      143.832
>DELZN4: ANT=10: FITPAR 4.     -419.161
>DELZN4: PLTEL:        39 points plotted
>DELZN4: GFINIS: number records used      21
>DELZN4: ZTXOP2: using translated file name =
>DELZN4: ZTXOP2:         1746+622        2148+065        0050-092
>I/O recursion: I/O started while already doing I/O
> IO
>
>   It dies here.
>
>   Note the funny translation of the file name (it looks like
>   some of the source names).
>
>   Any ideas
>
>Mark
>
>-------------------------------------------------------------
>Mark J. Reid                 Phone: 617-495-7470
>Harvard-Smithsonian CfA      Fax  : 617-495-7345
>60 Garden Street             Email: reid at cfa.harvard.edu
>Cambridge, MA 02138, USA     Web  : cfa-www.harvard.edu/~reid
>-------------------------------------------------------------
>
>  
>