[daip] Re: DELZN problem

Thu Nov 17 11:42:12 EST 2005

The error occured at the time when DELZN trys to record the data into 
the OUTFILE.
Something wrong is with definition of 'MYDATA:
Your last succesfull message is:

DELZN4: ZTXOP2: using translated file name =

The following line has to be the explicit description of the pass to the directory 
MYDATA

Instead you have
DELZN4: ZTXOP2:         1746+622        2148+065        0050-092

1. Run DELZN with OUTFILE = ' ' to verify that the problem is here

2. type echo $MYDATA in the LINUX/UNIX window. You should see the expected
    pass to MYDATA (not the list of the source!)

Let me now the result

Leonia

Mark Reid wrote:

>Leonia,
>
>   I'm having a problem running DELZN.  I hope you can
>shed some light on it.  In case you need to access
>the input data, I've put it on our anonymous ftp site:
>
>   ftp cfa-ftp.harvard.edu
>   anonymous
>   email_address
>   cd outgoing/reid
>   get 2005SEP07-CA.GEODAT        (180 Mbytes)
>
>The inputs and symptoms are as follows
>
>AIPS 4: DELZN     Determines residual atmosphere depth at zenith
>AIPS 4: Adverbs     Values                 Comments
>AIPS 4:
>----------------------------------------------------------------
>AIPS 4: INNAME     '2005SEP07-CA'          Input UV file name (name)
>AIPS 4: INCLASS    'GEODAT'                Input UV file name(class)
>AIPS 4: INSEQ         1                    Input UV file name (seq.
>AIPS 4: INDISK        1                    Input UV file disk unit #
>AIPS 4: SNVER         2                    Input SN table version
>AIPS 4: GAINVER       0                    Input CL table to copy to
>AIPS 4: APARM         0           2        control parameters:
>AIPS 4:               2        *rest 0     1: what data to plot
>AIPS 4: SOURCES    *all ' '                Source list ' '=>all.
>AIPS 4: CALSOUR    *all ' '                Calibrator list ' ' =
>AIPS 4: STOKES     ' '                     Stokes type to process
>AIPS 4: SELBAND      -1                    Bandwidth to select (kHz)
>AIPS 4: SELFREQ      -1                    Frequency to select (MHz)
>AIPS 4: FREQID       -1                    Freq. ID to select,
>AIPS 4: BIF           0                    Lowest IF number 0=>all
>AIPS 4: EIF           0                    Highest IF number 0=>all
>AIPS 4: TIMERANG   *all 0                  Time range to use. 0=>all
>AIPS 4: ANTENNAS   *all 0                  Antennas to select.
>AIPS 4: SUBARRAY      0                    Subarray; 0 => 1.
>AIPS 4: NPLOTS        5                    Number of plots per page
>AIPS 4: XINC          1                    Plot every XINC'th point
>AIPS 4: OPTYPE     ' '                     What data to read from
>AIPS 4: OUTFILE    'MYDATA:DELZN.OUT'      Table of
>AIPS 4: PRTLEV        1                    0=> no printout.
>AIPS 4: DOHIST       -1                    >0 => put coefficients in
>AIPS 4: DOTV         -1                    > 0 Do plot on the TV,
>AIPS 4: GRCHAN        0                    Graphics channel 0 => 1.
>AIPS 4: BADDISK    *all 0
>
>   The output is as follows:
>
>DELZN4: Task DELZN  (release of 31DEC05) begins
>DELZN4: !!!!! center of the data is at    0.28960 !!!!!
>DELZN4: Ref ANT= 9: FITPAR 1.      -89.078
>DELZN4: Ref ANT= 9: FITPAR 2.       65.337
>DELZN4: Ref ANT= 9: FITPAR 3.        0.000
>DELZN4: Ref ANT= 9: FITPAR 4.        0.000
>DELZN4: ANT= 1: FITPAR 1.       40.762
>DELZN4: ANT= 1: FITPAR 2.      210.557
>DELZN4: ANT= 1: FITPAR 3.     -159.071
>DELZN4: ANT= 1: FITPAR 4.     -261.306
>DELZN4: Plot file version   9  created.
>DELZN4: PLTEL:        44 points plotted
>DELZN4: ANT= 2: FITPAR 1.      -25.295
>DELZN4: ANT= 2: FITPAR 2.       17.019
>DELZN4: ANT= 2: FITPAR 3.      -59.768
>DELZN4: ANT= 2: FITPAR 4.       22.595
>DELZN4: PLTEL:        54 points plotted
>DELZN4: ANT= 3: FITPAR 1.      -27.207
>DELZN4: ANT= 3: FITPAR 2.      195.289
>DELZN4: ANT= 3: FITPAR 3.      -66.178
>DELZN4: ANT= 3: FITPAR 4.     -135.167
>DELZN4: PLTEL:        49 points plotted
>DELZN4: ANT= 4: FITPAR 1.      -69.795
>DELZN4: ANT= 4: FITPAR 2.      -18.945
>DELZN4: ANT= 4: FITPAR 3.       -0.695
>DELZN4: ANT= 4: FITPAR 4.     -209.749
>DELZN4: PLTEL:        54 points plotted
>DELZN4: ANT= 5: FITPAR 1.      -87.324
>DELZN4: ANT= 5: FITPAR 2.      -52.915
>DELZN4: ANT= 5: FITPAR 3.        7.045
>DELZN4: ANT= 5: FITPAR 4.      299.385
>DELZN4: PLTEL:        54 points plotted
>DELZN4: GFINIS: number records used      27
>DELZN4: ANT= 6: FITPAR 1.       -3.527
>DELZN4: ANT= 6: FITPAR 2.      -36.928
>DELZN4: ANT= 6: FITPAR 3.      -95.922
>DELZN4: ANT= 6: FITPAR 4.    -1284.067
>DELZN4: Plot file version  10  created.
>DELZN4: PLTEL:        36 points plotted
>DELZN4: ANT= 7: FITPAR 1.      -91.266
>DELZN4: ANT= 7: FITPAR 2.       47.309
>DELZN4: ANT= 7: FITPAR 3.        0.608
>DELZN4: ANT= 7: FITPAR 4.     -208.011
>DELZN4: PLTEL:        54 points plotted
>DELZN4: ANT= 8: FITPAR 1.       41.660
>DELZN4: ANT= 8: FITPAR 2.      -17.992
>DELZN4: ANT= 8: FITPAR 3.     -104.093
>DELZN4: ANT= 8: FITPAR 4.     -991.103
>DELZN4: PLTEL:        49 points plotted
>DELZN4: ANT=10: FITPAR 1.     -182.506
>DELZN4: ANT=10: FITPAR 2.       80.810
>DELZN4: ANT=10: FITPAR 3.      143.832
>DELZN4: ANT=10: FITPAR 4.     -419.161
>DELZN4: PLTEL:        39 points plotted
>DELZN4: GFINIS: number records used      21
>DELZN4: ZTXOP2: using translated file name =
>DELZN4: ZTXOP2:         1746+622        2148+065        0050-092
>I/O recursion: I/O started while already doing I/O
> IO
>
>   It dies here.
>
>   Note the funny translation of the file name (it looks like
>   some of the source names).
>
>   Any ideas
>
>Mark
>
>-------------------------------------------------------------
>Mark J. Reid                 Phone: 617-495-7470
>Harvard-Smithsonian CfA      Fax  : 617-495-7345
>60 Garden Street             Email: reid at cfa.harvard.edu
>Cambridge, MA 02138, USA     Web  : cfa-www.harvard.edu/~reid
>-------------------------------------------------------------
>
>  
>