[daip] AIPS

[Glenn Morrison]

Hi Eric,

I changed my home machine's name to just SWT40 and reran the complete install
after removing everything I did before. Same error:

The data areas are defined ( I also went with the one suggested by AIPS) Also,
there is plenty of space on disk one:

[morrison at swt40 aips]$ df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/sda5             19655284   1326360  17330488   8% /
/dev/sda1                15522      6020      8701  41% /boot
/dev/sda6             19631188   6808372  11825584  37% /home
/dev/sdb1              8815372    460400   7907164   6% /opt
/dev/sda2             30724312   2382036  28342276   8% /winc
/dev/sdc1              8947448        32   8947416   1% /wind
[morrison at swt40 aips]$

So, any ideas?

--Glenn


==more above==


 ZMSGOP: FILE DA01:MSD001000.001;      NOT FOUND
MSGWRT ERROR      2 AT OPEN
FILAI1: ZCREA2: PERFORMING NON-ATOMIC FILE CREATION INSTEAD
ZLOCK: Invalid argument
 ZMSGOP: FILE DA01:MSD001000.001;      NOT FOUND
MSGWRT ERROR      2 AT OPEN
FILAI1: INSUFFICIENT SPACE ON DISK  1 FOR FILE DA00:TCD000001;
 ZMSGOP: FILE DA01:MSD001000.001;      NOT FOUND
MSGWRT ERROR      2 AT OPEN
FILAI1: REQUESTED SIZE OF         210 BLOCKS FROM ZCREAT
 ZMSGOP: FILE DA01:MSD001000.001;      NOT FOUND
MSGWRT ERROR      2 AT OPEN
FILAI1: FILE TYPE TC CREATE ERROR      3
 ZMSGOP: FILE DA01:MSD001000.001;      NOT FOUND
MSGWRT ERROR      2 AT OPEN
FILAI1: Done!
AipsWiz: Error: FILAIP did not work, or there's a missing file!
AipsWiz: Error: This may mean that FILAIP did not work (it should have
AipsWiz: Error: created it and many other files in that area).
AipsWiz: Error: You can try running it by hand after (a) dotting the
AipsWiz: Error: LOGIN.SH file or sourcing the LOGIN.CSH file; and
AipsWiz: Error: (b) Typing 'RUN FILAIP'.  You will then be asked for
AipsWiz: Error: several parameters.  Use

35 -100
8 2
8

AipsWiz: Error: as the standard values.
AipsWiz: Error: You will also have to RUN POPSGN if that works;

AipsWiz: Error: Feed it

0 POPSDAT TST


AipsWiz: Error: when it asks for Idebug, etc. and press RETURN when
AipsWiz: Error: you see the '>' prompt.



AipsWiz: Install Wizard stopping.  Current settings saved in ~/.AIPSRC
AipsWiz: Abandoning ship!  Goodbye.