[daip] Re: AIPS

[Glenn Morrison]

More info,

I'm setting up AIPS under my username: morrison

I'm installing it under /opt/aips/

I've run FILAIP by itself--same error

--Glenn


> Hi Eric,
>
> I changed my home machine's name to just SWT40 and reran the complete install
> after removing everything I did before. Same error:
>
> The data areas are defined ( I also went with the one suggested by AIPS) Also,
> there is plenty of space on disk one:
>
> [morrison at swt40 aips]$ df
> Filesystem           1k-blocks      Used Available Use% Mounted on
> /dev/sda5             19655284   1326360  17330488   8% /
> /dev/sda1                15522      6020      8701  41% /boot
> /dev/sda6             19631188   6808372  11825584  37% /home
> /dev/sdb1              8815372    460400   7907164   6% /opt
> /dev/sda2             30724312   2382036  28342276   8% /winc
> /dev/sdc1              8947448        32   8947416   1% /wind
> [morrison at swt40 aips]$
>
> So, any ideas?
>
> --Glenn
>
> ==more above==
>
>  ZMSGOP: FILE DA01:MSD001000.001;      NOT FOUND
> MSGWRT ERROR      2 AT OPEN
> FILAI1: ZCREA2: PERFORMING NON-ATOMIC FILE CREATION INSTEAD
> ZLOCK: Invalid argument
>  ZMSGOP: FILE DA01:MSD001000.001;      NOT FOUND
> MSGWRT ERROR      2 AT OPEN
> FILAI1: INSUFFICIENT SPACE ON DISK  1 FOR FILE DA00:TCD000001;
>  ZMSGOP: FILE DA01:MSD001000.001;      NOT FOUND
> MSGWRT ERROR      2 AT OPEN
> FILAI1: REQUESTED SIZE OF         210 BLOCKS FROM ZCREAT
>  ZMSGOP: FILE DA01:MSD001000.001;      NOT FOUND
> MSGWRT ERROR      2 AT OPEN
> FILAI1: FILE TYPE TC CREATE ERROR      3
>  ZMSGOP: FILE DA01:MSD001000.001;      NOT FOUND
> MSGWRT ERROR      2 AT OPEN
> FILAI1: Done!
> AipsWiz: Error: FILAIP did not work, or there's a missing file!
> AipsWiz: Error: This may mean that FILAIP did not work (it should have
> AipsWiz: Error: created it and many other files in that area).
> AipsWiz: Error: You can try running it by hand after (a) dotting the
> AipsWiz: Error: LOGIN.SH file or sourcing the LOGIN.CSH file; and
> AipsWiz: Error: (b) Typing 'RUN FILAIP'.  You will then be asked for
> AipsWiz: Error: several parameters.  Use
>
> 35 -100
> 8 2
> 8
>
> AipsWiz: Error: as the standard values.
> AipsWiz: Error: You will also have to RUN POPSGN if that works;
>
> AipsWiz: Error: Feed it
>
> 0 POPSDAT TST
>
> AipsWiz: Error: when it asks for Idebug, etc. and press RETURN when
> AipsWiz: Error: you see the '>' prompt.
>
> AipsWiz: Install Wizard stopping.  Current settings saved in ~/.AIPSRC
> AipsWiz: Abandoning ship!  Goodbye.