[evlatests] 3-bit status

[Mike Revnell]

ea26-d301 has (had) this in it.....

BOARD SN: 109|2011/09/20|10:54;FPGA VER: digitizer 2011 Jun 23 16:05 ;SW 
VER: Jun 20 2011 16:50:51

Don't know why the MIB didn't pick up on it.

Mike.

Michael Rupen wrote:
> There were a number of tweaks to the 3-bit system yesterday.  This is
> my understanding of what I've heard -- please send along any corrections!
>
>
> * New samplers in ea10, ea12; all old samplers removed from array
>
>    We currently have all the first article sampler boards out on
>    the array, with 4 samplers (2 modules) each in:
>
>        ea06  ea07  ea10  ea12  ea14  ea26
>
>    ea06, ea07, ea10, ea14, and ea26 have new T304s
>    ea12 is still using old T304s -- we expect no fringes for A2C2, and
>      possibly low amp on A1C1
>
>    The old samplers will be returned to the array once Mike is done with
>    them (primarily putting in the new firmware), probably next week.
>    T304s for these will appear a few weeks thereafter.
>
>    Note that the sampler that was in ea15-A1 looked quite dead when on the
>    array.
>
>
> * The monitor point on the d301/d303 reports the following
>    serial numbers for the samplers currently on the array:
>
>      ea06-d301  073 110921|1417
>          -d303  115 110919|1109
>
>      ea07-d301  121 110906|1727
>          -d303  119 110907|0748
>
>      ea10-d301  001 111003|0904
>          -d303   67 111003|1705
>
>      ea12-d301  085 111003|1323
>          -d303   99 111004|0812
>
>      ea14-d301  125 110912|1325
>          -d303  127 110908|1556
>
>      ea26-d301  blank ???
>          -d303  123 110919|1421
>
>      ea15, ea28: no 3-bit samplers any more
>
>    Note that ea26-d301 has no serial number in there -- maybe Mike can
>    fix this?
>
>
> * Hichem fixed the MIB code per Barry's request, to ignore 3-bit
>    power commands if the 3-bit sampler is already on.  This should
>    eliminate various oddities we saw in our last tests (Tuesday I think?).
>    The most prominent problem from those earlier data sets was a reset of
>    the 3-bit samplers 15-20 seconds after the beginning of each 3-bit scan.
>    I believe this at least has been eliminated (thanks Hichem!) but am
>    waiting to hear back from Vivek about the more subtle issues.
>
>
>              -- Michael
> _______________________________________________
> evlatests mailing list
> evlatests at listmgr.cv.nrao.edu
> http://listmgr.cv.nrao.edu/mailman/listinfo/evlatests
>
>