[evlatests] 3-bit status
Michael Rupen
mrupen at nrao.edu
Thu Oct 6 15:38:32 EDT 2011
ea12 A1C1 indeed looks normal at first blush.
ea12 A2C2 may have other issues -- certainly there is no power coming
through.
Michael
>> ea12 is still using old T304s -- we expect no fringes for A2C2, and
>> possibly low amp on A1C1
>
> We expect weak/noisy fringes (low total power) for ea12 A2C2. We expect
> normal amplitudes on ea12 A1C1.
>
>
>
> Michael Rupen wrote:
>> There were a number of tweaks to the 3-bit system yesterday. This is
>> my understanding of what I've heard -- please send along any corrections!
>>
>>
>> * New samplers in ea10, ea12; all old samplers removed from array
>>
>> We currently have all the first article sampler boards out on
>> the array, with 4 samplers (2 modules) each in:
>>
>> ea06 ea07 ea10 ea12 ea14 ea26
>>
>> ea06, ea07, ea10, ea14, and ea26 have new T304s
>> ea12 is still using old T304s -- we expect no fringes for A2C2, and
>> possibly low amp on A1C1
>>
>> The old samplers will be returned to the array once Mike is done with
>> them (primarily putting in the new firmware), probably next week.
>> T304s for these will appear a few weeks thereafter.
>>
>> Note that the sampler that was in ea15-A1 looked quite dead when on the
>> array.
>>
>>
>> * The monitor point on the d301/d303 reports the following
>> serial numbers for the samplers currently on the array:
>>
>> ea06-d301 073 110921|1417
>> -d303 115 110919|1109
>>
>> ea07-d301 121 110906|1727
>> -d303 119 110907|0748
>>
>> ea10-d301 001 111003|0904
>> -d303 67 111003|1705
>>
>> ea12-d301 085 111003|1323
>> -d303 99 111004|0812
>>
>> ea14-d301 125 110912|1325
>> -d303 127 110908|1556
>>
>> ea26-d301 blank ???
>> -d303 123 110919|1421
>>
>> ea15, ea28: no 3-bit samplers any more
>>
>> Note that ea26-d301 has no serial number in there -- maybe Mike can
>> fix this?
>>
>>
>> * Hichem fixed the MIB code per Barry's request, to ignore 3-bit
>> power commands if the 3-bit sampler is already on. This should
>> eliminate various oddities we saw in our last tests (Tuesday I think?).
>> The most prominent problem from those earlier data sets was a reset of
>> the 3-bit samplers 15-20 seconds after the beginning of each 3-bit
>> scan.
>> I believe this at least has been eliminated (thanks Hichem!) but am
>> waiting to hear back from Vivek about the more subtle issues.
>>
>>
>> -- Michael
>> _______________________________________________
>> evlatests mailing list
>> evlatests at listmgr.cv.nrao.edu
>> http://listmgr.cv.nrao.edu/mailman/listinfo/evlatests
>
>
More information about the evlatests
mailing list