[daip] Strange problem with IMAGR...
Nissim Kanekar
nkanekar at ncra.tifr.res.in
Thu Nov 23 11:47:27 EST 2017
Hi Eric,
I've also tried running IMAGR in another AIPS number (where it worked fine
earlier), and find that I get the same error. It hence looks as though there's
some global problem with AIPS; could it be something to do with the data areas?
Thanks!
Nissim
On Thu, 23 Nov 2017, Nissim Kanekar wrote:
>
> Hi Eric,
>
> I've come across a strange problem with IMAGR and was wondering whether you
> might have seen this before and might know a solution. It's giving me the
> following error:
>
> ZMSFI2: REQUEST FOR BYTES 1 THRU = 0
> ZMSFI2: BEYOND EOF = 0
> ZMSGDK: OPER = READ LUN = 12 NREC = 1
> ZMSGER: SYSTEM I/O ERROR CODE = -1
> MSGWRT ERROR 3 AT OPEN
> IMAGR1: ZFI2: DELAY 1
> ZMSFI2: REQUEST FOR BYTES 1 THRU = 0
> ZMSFI2: BEYOND EOF = 0
> ZMSGDK: OPER = READ LUN = 12 NREC = 1
> ZMSGER: SYSTEM I/O ERROR CODE = -1
> MSGWRT ERROR 3 AT OPEN
> IMAGR1: ZABORS: signal 11 received
> ZMSFI2: REQUEST FOR BYTES 1 THRU = 0
> ZMSFI2: BEYOND EOF = 0
> ZMSGDK: OPER = READ LUN = 12 NREC = 1
> ZMSGER: SYSTEM I/O ERROR CODE = -1
> MSGWRT ERROR 3 AT OPEN
> IMAGR1: ABORT!
> AIPS 1: TASK QUIT WITHOUT RESUMING ME
> AIPS 1: Begin check for any 'standard' scratch files
> AIPS 1: Scratch files -- destroyed: 2 still active: 0
> AIPS 1: Resumes
>
>
> Also, the message server shows NaN's as the beam minimum and maximum:
>
> QUIXOT> IMAGR1: Field 1 Beam min = NaN Jy, max = NaN Jy
> QUIXOT> IMAGR1: Fit Gaussian FWHM = 10.265 x 5.346 arcsec, PA=
> -61.5
>
> Do you have any idea what might be going on?
>
> Thanks!
> Nissim
>
>
>
More information about the Daip
mailing list