[daip] Split CSLGET error

[Arnaud Collioud]

> Done - tomorrow's MNJ will bring you ANTAB with 200000.

Great! Thanks Eric!

> Note that you are still dropping a lot of observations when you do SPLIT since you do not have calibrations to match all of the data that are present.  The CL table itself lacks the necessary records.  You probably need to do the subarray 0 trick to the SN tables and then all subarrays will get filled in - but they have to be there first and they are not in this CL table.

Which task are you using to quantify the loss of observations?
In which step do you think I should change the subarray values to 0? I think the bottleneck (for solutions) of my process is the step 8 (fringe-fitting baseline solutions). If I change the subarrays to 0 in the SN tables resulting from BLAPP, how should I apply them? For the moment, I am using CLCAL with interpolation 'SELN'. Should I keep the same interpolation method?

>> 1/ Loaded (FITLD)

>> 2/ Sorted (MSORT)

>> 3/ Indexed (USUBA and INDXR) -> AN 2 to 6 ; NX1

>> 4/ Add flags (UVFLG) -> FG1

>> 5/ Add tsys/gain (ANTAB) -> TY 1 to 6 ; GC 1 to 6  [with no tsys re-sampled]
>>                                               -> TY 7 to 12 ; GC 7 to 12 [with tsys re-sampled every 40 seconds]

>> 6/ Apply tsys/gain (APCAL) -> SN 1 à 6    [corresponds to TY/GC 1 to 6]
>>                                                  -> SN 7 à 12    [corresponds to TY/GC 7 to 12]

>> 7/ Apply corrections (CLCAL) -> CL 2    [corresponds to SN 1 to 6]
>>                                                      -> CL 3    [corresponds to SN 7 to 12]

>> 8/ Load delay/rate corrections calculated by HOPS program and transferred in AIPS by MK4IN -> BS 1
>>    (BLAPP)    -> SN 13 to 18

>> 9/ Apply these corrections (CLCAL) -> CL4 [based on CL3]


Cheers,
Arnaud