[daip] TABINI error in CALIB
Andy Biggs
abiggs at eso.org
Fri Jan 13 14:18:14 EST 2012
Hi there. I'm trying to run CALIB on a dataset and am getting an error that I've never seen before. The following is reported:
CALIB3: Task CALIB (release of 31DEC12) begins
CALIB3: Using GROTHN3 . SPLAT . 2 Disk= 1 Usid= 4003
CALIB3: Doing no flagging this time
CALIB3: Selecting the data
CALIB3: Using Clean Component self-cal source model
CALIB3: SETGDS: imaging done with reprojected tangent point(s)
CALIB3: NO FLUX FOUND FOR CALIBRATOR SOURCE IN SU TABLE
CALIB3: MODEL WILL USE THE FLUX CONTAINED IN IT ONLY
CALIB3: THE USE OF GETJY AFTER THIS WILL BE INCORRECT
CALIB3: FACSET: 1.056908 Jy found from 3419 components
CALIB3: Divide data by model - first compute model by summing
CALIB3: TABINI: FILE NOT A TABLE FILE
CALIB3: FQINI: ERROR 5 FROM TABINI OPCODE = WRIT
CALIB3: FQINI: ERROR INITIALIZING FREQUENCY TABLE FOR WRIT
CALIB3: CHNCOP: ERROR 5 WRITING NEW IF TABLE
CALIB3: Purports to die of UNNATURAL causes
CALIB3: pc016987 31DEC12 TST: Cpu= 15.6 Real= 68 IO= 4861
I have various other datafiles that have been processed exactly the same way and they don't show this error. Do you know what might be causing it?
In case it's stupid inputs on my part:
AIPS 3: CALIB: Task to determine calibration for data.
AIPS 3: Adverbs Values Comments
AIPS 3: ----------------------------------------------------------------
AIPS 3: Input uv data.
AIPS 3: INNAME 'GROTHN3' UV file name (name)
AIPS 3: INCLASS 'SPLAT' UV file name (class)
AIPS 3: INSEQ 2 UV file name (seq. #)
AIPS 3: INDISK 1 UV file disk drive #
AIPS 3: Data selection (multisource):
AIPS 3: CALSOUR 'GROTHN3' Calibrator sources
AIPS 3: *rest ' '
AIPS 3: QUAL -1 Calibrator qualifier -1=>all
AIPS 3: CALCODE ' ' Calibrator code ' '=>all
AIPS 3: SELBAND -1 Bandwidth to select (kHz)
AIPS 3: SELFREQ -1 Frequency to select (MHz)
AIPS 3: FREQID -1 Freq. ID to select.
AIPS 3: TIMERANG *all 0 Time range to use.
AIPS 3: ICHANSEL 1 30 Array of start and stop chn
AIPS 3: 1 *rest 0 numbers, plus a channel
AIPS 3: increment and IF to be used
AIPS 3: for channel selection in the
AIPS 3: averaging. See HELP ICHANSEL.
AIPS 3: Default = center 75% of band.
AIPS 3: ANTENNAS *all 0 Antennas to select. 0=all
AIPS 3: DOFIT *all 0 Subset of ANTENNAS list for
AIPS 3: which solns are desired.
AIPS 3: ANTUSE *all 0 Mean gain is calculated
AIPS 3: (CPARM(2)>0) using only the
AIPS 3: listed antennas. See explain.
AIPS 3: SUBARRAY 0 Subarray, 0=>all
AIPS 3: UVRANGE 1 300 Range of uv distance for full
AIPS 3: weight
AIPS 3: WTUV 0 Weight outside UVRANGE 0=0.
AIPS 3: WEIGHTIT 0 Modify data weights function
AIPS 3: Cal. info for input:
AIPS 3: DOCALIB -1 > 0 calibrate data & weights
AIPS 3: > 99 do NOT calibrate weights
AIPS 3: NOT for single-source files
AIPS 3: GAINUSE 0 CL table to apply.
AIPS 3: DOPOL -1 If >0 correct polarization.
AIPS 3: PDVER 0 PD table to apply (DOPOL>0)
AIPS 3: BLVER -1 BL table to apply.
AIPS 3: FLAGVER 0 Flag table version
AIPS 3: DOBAND -1 If >0 apply bandpass cal.
AIPS 3: Method used depends on value
AIPS 3: of DOBAND (see HELP file).
AIPS 3: BPVER -1 Bandpass table version
AIPS 3: SMOOTH *all 0 Smoothing function. See
AIPS 3: HELP SMOOTH for details.
AIPS 3:
AIPS 3: CLEAN map. See HELP.
AIPS 3: IN2NAME 'MULTI' Cleaned map name (name)
AIPS 3: IN2CLASS 'ICL001' Cleaned map name (class)
AIPS 3: IN2SEQ 3 Cleaned map name (seq. #)
AIPS 3: IN2DISK 1 Cleaned map disk unit #
AIPS 3: INVERS 0 CC file version #.
AIPS 3: NCOMP *all 0 # comps to use for model.
AIPS 3: 1 value per field
AIPS 3: FLUX 0 Lowest CC component used.
AIPS 3: NMAPS 86 No. Clean map files
AIPS 3: CMETHOD ' ' Modeling method:
AIPS 3: 'DFT','GRID',' '
AIPS 3: CMODEL ' ' Model type: 'COMP','IMAG'
AIPS 3: 'SUBI' (see HELP re images)
AIPS 3: SMODEL *all 0 Source model, 1=flux,2=x,3=y
AIPS 3: See HELP SMODEL for models.
AIPS 3: Output uv data file.
AIPS 3: OUTNAME ' ' UV file name (name)
AIPS 3: OUTCLASS ' ' UV file name (class)
AIPS 3: OUTSEQ 0 UV file name (seq. #)
AIPS 3: OUTDISK 1 UV file disk drive #
AIPS 3: DOAPPLY 0 >= 0 write output if
AIPS 3: single source
AIPS 3: Solution control adverbs:
AIPS 3: REFANT 4 Reference antenna
AIPS 3: SOLINT 2 Solution interval (min)
AIPS 3: SOLSUB 0 Solution subinterval
AIPS 3: SOLMIN 0 Min solution interval
AIPS 3: APARM *all 0 General parameters
AIPS 3: 1=min. no. antennas
AIPS 3: 2 > 0 => data divided
AIPS 3: 3 > 0 => avg. RR,LL
AIPS 3: 5 > 0 => avg. IFs.
AIPS 3: 6=print level, 1=good,
AIPS 3: 2 closure, 3 SNR
AIPS 3: 7=SNR cutoff (0=>5)
AIPS 3: 8=max. ant. # (no AN)
AIPS 3: 9 > 0 => pass failed soln
AIPS 3: 10 < 99 cal output weights
AIPS 3: Phase-amplitude Parameters:
AIPS 3: DOFLAG 0 Flag on closure error?
AIPS 3: SOLTYPE 'R' Soln type,' ','L1','GCON',
AIPS 3: 'R', 'L1R', 'GCOR'
AIPS 3: SOLMODE 'P' Soln. mode: 'A&P','P','P!A',
AIPS 3: 'GCON',
AIPS 3: SOLCON 0 Gain constraint factor.
AIPS 3: MINAMPER 0 Amplitude closure error
AIPS 3: regarded as excessive in %
AIPS 3: MINPHSER 0 Phase closure error regarded
AIPS 3: as excessive in degrees
AIPS 3: NORMALIZ 0 >0 => normalize gain:
AIPS 3: 1 globally, 2 by subarray,
AIPS 3: 3 by subarray,IF
AIPS 3: 4 by subarray,IF,pol
AIPS 3: CPARM *all 0 Phase-amp. parameters
AIPS 3: 1 = Min el for gain
AIPS 3: normalization (deg)
AIPS 3: 2 > 0 normalize w median
AIPS 3: else use mean
AIPS 3: 3 avg. amp. closure err
AIPS 3: 4 avg. ph. closure err
AIPS 3: 5 = 1 vector average
AIPS 3: channels, scalar avg
AIPS 3: between times
AIPS 3: >= 2 scalar average
AIPS 3: 6 limit clipping in robust
AIPS 3: 7 limit display of closure
AIPS 3: errors
AIPS 3: SNVER 0 Output SN table, 0=>new table
AIPS 3: ANTWT *all 0 Ant. weights (0=>1.0)
AIPS 3: GAINERR *all 0 Std. Dev. of antenna gains.
AIPS 3: BADDISK *all 0 Disk no. not to use for
AIPS 3: scratch files.
And here is the FQ table:
pc016987 PRTAB(31DEC12) 4003 13-JAN-2012 20:17:16 Page 1
GROTHN3 .SPLAT . 2 Disk= 1 FQ Table version 1
Title: AIPS UV DATA FILE FREQUENCY TABLE
Created by SPLAT on 13-JAN-2012 11:32:09
Last written by SPLAT on 13-JAN-2012 11:32:09
Ncol 5 Nrow 1 Sort cols:
Table has 1 keyword-value pairs:
NO_IF = 2
Table format incompatable with FITS ASCII tables
COL. NO. 1 2 3 4 5
ROW FRQSEL IF FREQ CH WIDTH TOTAL BAN SIDEBAND
NUMBER HZ HZ HZ
1 1 0.000000D+00 5.000E+05 1.500E+07 1
1 1.600000D+07 5.000E+05 1.500E+07 1
PRTAB3: Appears to have ended successfully
PRTAB3: pc016987 31DEC12 TST: Cpu= 0.0 Real= 0
AIPS 3: Resumes
Thanks,
Andy
More information about the Daip
mailing list