[daip] FARS run

[Leonia Kogan]

Larry,

You write:
 > I cannot get FARS to run on my computer on the newest cubes FNO just
 > sent me. It's looking for a FREQID axis which did not get produced by
 > MCUBE.

This problem was fixed a time ago. The last version of FARS (at 31DEC11)
should work with both type of input cubes: there is or there is not
FREQID.

So you have to use the last version of AIPS  (31DEC11)

FRAZER is at the vacation for several weeks now. :(

Cheers  Leonia

Lawrence Rudnick wrote:
> Hi Leonia -
> 
> I have a favor to ask on the project with Frazer and Jean, if you can do 
> this without messing up your other work.
> 
> I cannot get FARS to run on my computer on the newest cubes FNO just 
> sent me. It's looking for a FREQID axis which did not get produced by 
> MCUBE.
> 
>   The easiest thing, if you have time, would be to do the FARS runs, 
> especially since you have an updated version of the software.  Here's 
> the information, if you are able to do this:
> 
> A. OUTPUTS
>      1. Cleaned faraday cube from -1000 to +1000 rad/m2, 
> [aparm(1)=100,aparm(2)=10] and with restoring beam width corresponding 
> to amplitude in RMTF (NOT width of RE).
>      2. The peak RM and amplitude images, with the above parameters
>      3. The peak RM and amplitude images with DIFFERENT parameters
> [aparm(1)=25,aparm(2)=10].
> 
>      Then put output maps into the public ftp area where I could 
> retrieve them.
> 
> B. INPUT FILES
>      These are in ftp.aoc.nrao.edu/pub/staff/fowen/3C465
>       3C465C2R_QFLATC.FITS, 3C465C2R_UFLATC.FITS
>      (of course they need to be transposed)
> 
>       Weight file (attached).
> 
> Many thanks, and if you can't do it, I understand.
> 
> Cheers, Larry
>