[daip] Problems with attaching GC and TY files to old data
Amy Mioduszewski
amiodusz at nrao.edu
Thu May 26 14:11:38 EDT 2011
Great!
Amy
Phoebe R. Upton Sanderbeck wrote:
> Hi Amy,
> This worked perfectly for me too, thank you so much for the help and
> have a nice vacation!
> Thanks,
> Phoebe
>
> On Thu, May 26, 2011 at 12:47 PM, Amy Mioduszewski <amiodusz at nrao.edu
> <mailto:amiodusz at nrao.edu>> wrote:
>
> Hi Pheobe,
>
> So I:
> 1) VLBALOADed the Mar 24 data
> 2) ran INDXR
> 3) ran VLOG on a concatenation of ba030bcal.vlba and vlba_gains.key
> --set OUTFILE 'BA030B'
> --I got some odd errors about no index line but it produced a file
> 4) ran ANTAB on BA030B.TSYS and it seemed to run fine.
> 5) plotted the Tsys with SNPLT and the Tsys look O.K..
>
> So I cannot reproduce your error. Although one possible way that
> AIPS might get confused is with the multiple frequencies. So you
> could try to copy out the individual freqs and see if that helps.
>
>
> Amy
>
> Phoebe R. Upton Sanderbeck wrote:
>
> Ok, thank you
>
>
> On Thu, May 26, 2011 at 11:19 AM, Amy Mioduszewski
> <amiodusz at nrao.edu <mailto:amiodusz at nrao.edu>
> <mailto:amiodusz at nrao.edu <mailto:amiodusz at nrao.edu>>> wrote:
>
> Hi Pheobe,
>
> I am leaving for a three week vacation starting Saturday, so make
> sure to cc your e-mails to daip at nrao.edu
> <mailto:daip at nrao.edu> <mailto:daip at nrao.edu
> <mailto:daip at nrao.edu>> so
>
> someone can take over for me while I am gone, if you still
> have issues.
>
> O.K., I'll download your data and see what I can find.
>
> Amy
>
>
> Phoebe R. Upton Sanderbeck wrote:
>
> Hi Amy,
> Your advice helped me get much further than I was able to
> before, but unfortunately I still am having troubles with
> antab.
> I'm worried that the tsys/gains file is not correctly
> formatted,
> I keep getting this error:
>
> DYN-12> ANTAB1: KEYIN: ERROR, UNKNOWN PARAMETER OPCODE
> DYN-12> ANTAB1: KEYIN: ERROR, UNKNOWN PARAMETER DTIMRANG
> DYN-12> ANTAB1: KEYIN: ERROR, UNKNOWN PARAMETER ANT_NAME
> DYN-12> ANTAB1: KEYIN: ERROR, UNKNOWN PARAMETER ANT_NAME
> DYN-12> ANTAB1: KEYIN: ERROR, UNKNOWN PARAMETER ANT_NAME
> DYN-12> ANTAB1: KEYIN: ERROR, UNKNOWN PARAMETER ANT_NAME
> DYN-12> ANTAB1: KEYIN: ERROR, UNKNOWN PARAMETER ANT_NAME
> DYN-12> ANTAB1: KEYIN: ERROR, UNKNOWN PARAMETER ANT_NAME
> DYN-12> ANTAB1: KEYIN: ERROR, UNKNOWN PARAMETER ANT_NAME
> DYN-12> ANTAB1: KEYIN: ERROR, UNKNOWN PARAMETER ANT_NAME
> DYN-12> ANTAB1: TXTCAL: ERROR 2 READING CAL. FILE
> DYN-12> ANTAB1: Purports to die of UNNATURAL causes
>
> I basically just appended a file to include
> vlba_gains.key and
> all of the .vlba and .y files for the project and used
> this file
> in calin. I've attached a sample of this file that includes a
> snippet from each section. Again, thank you for your help,
> Phoebe
>
>
> On Wed, May 25, 2011 at 12:08 PM, Phoebe R. Upton Sanderbeck
> <phoerae at brandeis.edu <mailto:phoerae at brandeis.edu>
> <mailto:phoerae at brandeis.edu <mailto:phoerae at brandeis.edu>>
> <mailto:phoerae at brandeis.edu
> <mailto:phoerae at brandeis.edu> <mailto:phoerae at brandeis.edu
> <mailto:phoerae at brandeis.edu>>>> wrote:
>
> Hi Amy,
> Thanks for your response. I didn't notice that
> actually, I'll
> have
> to look for that in the future.
> Thank you for your help,
> Phoebe
>
> On Wed, May 25, 2011 at 11:59 AM, Amy Mioduszewski
> <amiodusz at nrao.edu <mailto:amiodusz at nrao.edu>
> <mailto:amiodusz at nrao.edu <mailto:amiodusz at nrao.edu>>
> <mailto:amiodusz at nrao.edu <mailto:amiodusz at nrao.edu>
> <mailto:amiodusz at nrao.edu <mailto:amiodusz at nrao.edu>>>> wrote:
>
> Hi Phoebe,
>
> I looked at these experiments in the archive and there
> appears
> to be multiple fits files for the same times (this
> can happen
> for a variety of reasons, multiple passes,
> recorrelation
> etc.).
> Did you download all of fits files for a
> particular date and
> load them all into the same file? This will
> confuse AIPS and
> can cause the problems you are seeing.
>
> Amy
>
>
>
>
>
More information about the Daip
mailing list