[daip] 31DEC11 LINUX midnite job (dave, 20101201.234714)
aipsmgr at nrao.edu
aipsmgr at nrao.edu
Wed Dec 1 18:47:43 EST 2010
dave update report for 31DEC11 on Wed Dec 1 23:47:43 UTC 2010 (UT)
Copies and compiles:
AIPSUPD - Using CVS for copying files.
UPDCVS - cvs copy of 31DEC11 begun, 1st character means
- U added, P updated, M your file differs from master
- C you have a changed file needing work (error!)
- ? you have a file not on the master (ignore)
? 31DEC11/SUL/SYSTEM/NRAOAOC
U 31DEC11/TIMESTAMP
P 31DEC11/APL/DEV/UNIX/ZTACT2.C
P 31DEC11/APL/PGM/NOTST/RMSD.FOR
P 31DEC11/HIST/CHANGE.DOC
U 31DEC11/UPDATE/COMLNK.UPD
U 31DEC11/UPDATE/COMLNK.UPD.SUM
U 31DEC11/UPDATE/COMRPL.UPD
U 31DEC11/UPDATE/COMRPL.UPD.SUM
U 31DEC11/UPDATE/LASTCVS.DAT
P 31DEC11/UPDATE/PUTBCK.UPD
U 31DEC11/UPDATE/PUTBCK.UPD.SUM
P 31DEC11/UPDATE/REASONS.UPD
U 31DEC11/UPDATE/REASONS.UPD.SUM
UPDCVS - cvs update of 31DEC11 completed
UPDCVS - cvs update of TEXT completed
AIPSUPD - UPDCVS apparently worked
UPDCONTROL - /home/AIPS/31DEC11/LINUX/UPDATE/LASTREMOVE.DAT = 20101130.000000
UPDCONTROL - /home/AIPS/31DEC11/LINUX/UPDATE/LASTCOPY.DAT = 20101130.000000
UPDCONTROL - /home/AIPS/31DEC11/LINUX/UPDATE/LASTCOMRPL.DAT = 20101130.000000
UPDCONTROL - /home/AIPS/31DEC11/LINUX/UPDATE/LASTCOMLNK.DAT = 20101130.000000
UPDCONTROL - Everything seems in order
Moving AIPSPATH.SH from SYSUNIX to AIPS_ROOT
Redefining AIPS_ROOT as /home/AIPS
Moving AIPSPATH.CSH from SYSUNIX to AIPS_ROOT
Redefining AIPS_ROOT as /home/AIPS
UPDUPDATE - there are UPDUNIX changes to process
Re-make copy of UPDCONTROL
UPDCOMRPL: COMRPLs
01-DEC-2010 22:34:55 20101201 TST APLSUB GETRLS egreisen
01-DEC-2010 23:33:37 20101201 TST APLUNIX ZTACT2.C egreisen
01-DEC-2010 22:34:55 20101201 TST QPSAP QRFFT egreisen
01-DEC-2010 22:34:56 20101201 TST QPSAP QXFOUR egreisen
UPDCOMRPL: currently in /home/AIPS/31DEC11/LINUX/UPDATE
UPDCOMRPL: /home/AIPS/31DEC11/APL/SUB/GETRLS
UPDCOMRPL: /home/AIPS/31DEC11/APL/DEV/UNIX/ZTACT2.C
UPDCOMRPL: /home/AIPS/31DEC11/Q/DEV/PSAP/QRFFT
UPDCOMRPL: /home/AIPS/31DEC11/Q/DEV/PSAP/QXFOUR
UPDCOMLNK: COMLNKs
01-DEC-2010 23:33:54 20101201 TST AIPPGM AIPSB.FOR egreisen
01-DEC-2010 23:33:56 20101201 TST AIPPGM AIPSC.FOR egreisen
01-DEC-2010 23:33:58 20101201 TST AIPPGM AIPS.FOR egreisen
01-DEC-2010 20:14:28 20101201 TST APGNOT RMSD.FOR egreisen
UPDCOMLNK: currently in /home/AIPS/31DEC11/LINUX/UPDATE
UPDCOMLNK: /home/AIPS/31DEC11/AIPS/PGM/AIPSB.FOR
UPDCOMLNK: /home/AIPS/31DEC11/AIPS/PGM/AIPSC.FOR
UPDCOMLNK: /home/AIPS/31DEC11/AIPS/PGM/AIPS.FOR
UPDCOMLNK: /home/AIPS/31DEC11/APL/PGM/NOTST/RMSD.FOR
UPDCONTROL - Reasons for file updates on Wed Dec 1 23:47:28 UTC 2010 (UT)
01-DEC-2010 15:47:04 20101201 TST UPDUNIX UPDCONTROL 31DEC11
01-DEC-2010 15:47:04 20101201 TST SYSUNIX AIPSPATH.CSH 31DEC11
01-DEC-2010 15:47:05 20101201 TST SYSUNIX AIPSPATH.SH 31DEC11
01-DEC-2010 15:47:17 20101201 TST APLSUB GETRLS.FOR 31DEC11
01-DEC-2010 15:47:17 20101201 TST INSUNIX INSTEP1 31DEC11
01-DEC-2010 15:47:18 20101201 TST SYSPERL install.pl 31DEC11
01-DEC-2010 15:47:20 20101201 TST SYSPERL update.pl 31DEC11
01-DEC-2010 15:49:57 20101201 TST SYSPERL LaCook.PL update
01-DEC-2010 15:50:04 20101201 TST SYSPERL ZXHLP2.PL 31DEC11
01-DEC-2010 15:50:17 20101201 TST INC PUVD.INC up size maxcif, xctbsz
01-DEC-2010 15:50:18 20101201 TST INC PMAD.INC up maximg
01-DEC-2010 15:50:18 20101201 TST INC ZPBUFSZ.INC up buffer sizes
01-DEC-2010 15:50:19 20101201 TST QPSAP QRFFT.FOR 8192 -> maximg/4
01-DEC-2010 15:50:20 20101201 TST QPSAP QXFOUR.FOR 32768 -> maximg
01-DEC-2010 20:14:19 20101201 TST APGNOT RMSD.FOR macppc will not compile
01-DEC-2010 20:21:30 20101201 TST HIST CHANGE.DOC rollover
01-DEC-2010 23:33:31 20101201 TST APLUNIX ZTACT2.C suppress message
CHANGE.DOC entries:
; Copyright (C) 2010
Changes while 31DEC11 is TST
< Changed formats inside to allow for sizes 33 inches.
< OPCODE 'WTUV' =do CLIP and check reasonable weights with
< Found a HI write line where DATAOUT 33 characters caused a
< Made code to plot scan breaks in the data. APARM(8) 0.
< over type of smoothing and to ignore pts n sigma in
< smoothing. Added flagging of weights < or set limits.
< antenna-based weights one. If APARM(1) 0, then find weights
< and Real/Imag 1.5 in the HI file along with all adverbs.
< counters to separate Real/Imag 1.5 from Imag/REal >
< than 0 and 0.0 will be used iff SPECINDX < -5 or +5.
< ordinary polynomials with DPARM(i) 0.
< 4. Add SPECTRAL to say (0) to do a channel-dependent antenna
< UVGET Clear dynamic memory if DOPOL 0 and PDVER>0.
< weight is multiplied by this change in rms. If APARM(9) 0,
< The fully translated name could easily be 48 characters.
13339. December 1, 2010 Code rollover Eric
< FLAGVER adverb: 0 -do nothing. One must specify the desired
< DOCRT 0 is supposed to trigger CRT printing and an
< requiring it to be 0.5 or they would resume AIPS. Some of
< SNPLT OPTYPE PSPD -PSYS and plots Tsys =
< E UVAVG OPCODE, POSSM 0 -vector now
PUVD.INC 32768 -> 65536 for MAXCIF, MAXCHA
5000 -> 25000 for XCTBSZ
PMAD.INC 32768 -> 65536 for MAXIMG
ZPBUFSZ 32768 -> 65536, 6*256 -> 12*256
QRFFT 8192 -> MAXIMG/4
QXFOUR 32768 -> MAXIMG, 8192 -> MAXIMG/4
APLSUB GETRLS.FOR 31DEC10 -> 31DEC11
INSUNIX INSTEP1 31DEC11
SYSPERL install.pl 31DEC11
SYSPERL update.pl 31DEC11
SYSPERL ZXHLP2.PL 31DEC11
SYSPERL LaCook.PL 31DEC11
UPDUNIX UPDCONTROL 31DEC11
SYSUNIX AIPSPATH.CSH 31DEC11
SYSUNIX AIPSPATH.SH 31DEC11
Moved nowhere.
13340. December 1, 2010 RMSD Eric
The MACPPC compiler cannot handle a parameter that involves >
1 math operation. Thus PARAMETER (A = B*B/32) does not work
whilst PARAMETER (A = (B)*(B/32)) does.
Moved to 31DEC10 this date.
13341. December
More information about the Daip
mailing list