[daip] 31DEC08 UVCON error
Leonia Kogan
lkogan at nrao.edu
Mon Jul 7 19:21:26 EDT 2008
Hi Vincent,
First of all I have not changed anything in UVCON recently (this year at
least).
Having looked at the output of UVCON you sent me I see strange output of
the antenna positions at both versions.
As I remember the first line for each antenna is just copy of your input
file and the second line is recalculated 3
coordinates in the equatorial coordinate system. I see positions which
are .GT. 10,000 km.
Where are the antennas located and what is coordinate system? Send me
your INFILE please?
Leonia
Vincent Fish wrote:
> In the 31DEC08 version, task UVCON fails for me with the error
> POISSO> UVCON2: CATOPN: ACCESS DENIED TO DISK*** FOR USER 170
> POISSO> UVCON2: ZABORS: signal 11 received
> POISSO> UVCON2: ABORT!
>
> The 31DEC07 version I have (from toward the end of last year) works just
> fine. For the record, I did not update it with the midnight job after
> changes may possibly have been made to the task by Leonia.
>
> The inputs I'm using, redacting lines of explanation for brevity:
> AIPS 2: UVCON Generates UV data for a given array and model
> AIPS 2: Adverbs Values Comments
> AIPS 2: ----------------------------------------------------------------
> AIPS 2: INFILE 'HOME:arrays/final-230' Antenna location file name
> AIPS 2: IN2FILE *all ' ' TSYS and Efficiency
> AIPS 2: OUTFILE *all ' ' Antenna location file name
> AIPS 2: IN2NAME '11_009' Model image name (name)
> AIPS 2: IN2CLASS 'SUB-I' Model image name (class)
> AIPS 2: IN2SEQ 1 Model image name (seq. #)
> AIPS 2: IN2DISK 1 Model image disk unit #
> AIPS 2: INVERS 0 CC file version #.
> AIPS 2: OUTNAME 'TEST' Output UV file name (name)
> AIPS 2: OUTCLASS 'UVC230' Output UV file name (class)
> AIPS 2: OUTSEQ 0 Output UV file name (seq. #)
> AIPS 2: OUTDISK 1 Output UV file disk unit #.
> AIPS 2: NMAPS 0 No. maps to use for model.
> AIPS 2: BCOMP *all 0 First CLEAN comp to sub.
> AIPS 2: NCOMP *all 0 Last CLEAN comp to sub.
> AIPS 2: FLUX 0 Lowest CC component used.
> AIPS 2: CMETHOD ' ' Modeling method:
> AIPS 2: CMODEL 'IMAG' Model type: 'COMP','IMAG'
> AIPS 2: FACTOR 1 Factor times model fluxes.
> AIPS 2: SMODEL *all 0 Source model, 1=flux,2=x,3=y
> AIPS 2: RASHIFT *all 0 Shift of the model center
> AIPS 2: DECSHIFT *all 0 Shift of the model center
> AIPS 2: APARM 230 0 Control information:
> AIPS 2: -29 -6 1: Frequency of chan. 1, GHz
> AIPS 2: 18 5 2: Wavelength of ch 1, cm
> AIPS 2: 10 -2000 IF both .LE. 0 then
> AIPS 2: 0 0 wavelength = 0.1 cm
> AIPS 2: BPARM -1 *rest 0 Control information:
> AIPS 2: BMAJ 0 FWHM major axis of the
> AIPS 2: BMIN 0 FWHM minor axis of the
> AIPS 2: BPA 0 Position angle of Gaussian
> AIPS 2: DO3DIMAG 0 1 => use W term calculating
>
> Under version 'NEW' (31DEC07), it succeeds with the following output in
> the message server window
> POISSO> UVCON2: Task UVCON (release of 31DEC07) begins
> POISSO> UVCON2: ZTXOP2: using translated file name =
> POISSO> UVCON2: ZTXOP2: /home/vfish/arrays/final-230
> POISSO> UVCON2: Number of antennas = 9
> POISSO> UVCON2: Site latitude = 0.000 degrees
> POISSO> UVCON2: Site longtitude = 0.000 degrees
> POISSO> UVCON2: Coordinate conversion factor to meters = 1.00000E+00
> POISSO> UVCON2: Diameter conversion factor to meters = 1.00000E+00
> POISSO> UVCON2: A( 1):-5464523.-2493147. 2150612.; d= 21. ef= 0.50 T=
> 300.0 4
> POISSO> UVCON2: A( 1):*********-2493147. 2150612.; d= 21. ef= 0.50 T=
> 300.0 4
> POISSO> UVCON2: A( 2):-1828796.-5054407. 3427865.; d= 10. ef= 0.59 T=
> 200.0 4
> POISSO> UVCON2: A( 2):-8206933.-5054407. 3427865.; d= 10. ef= 0.59 T=
> 200.0 4
> POISSO> UVCON2: A( 3):-2397431.-4482019. 3843524.; d= 27. ef= 0.55 T=
> 400.0 4
> POISSO> UVCON2: A( 3):-8775568.-4482019. 3843524.; d= 27. ef= 0.55 T=
> 400.0 4
> POISSO> UVCON2: A( 4): -768714.-5988542. 2063276.; d= 32. ef= 0.10 T=
> 291.0 4
> POISSO> UVCON2: A( 4):-7146851.-5988542. 2063276.; d= 32. ef= 0.10 T=
> 291.0 4
> POISSO> UVCON2: A( 5): 2225037.-5441199.-2479303.; d= 12. ef= 0.75 T=
> 200.0 4
> POISSO> UVCON2: A( 5):-4153100.-5441199.-2479303.; d= 12. ef= 0.75 T=
> 200.0 4
> POISSO> UVCON2: A( 6): 5088968. -301682. 3825016.; d= 30. ef= 0.41 T=
> 300.0 4
> POISSO> UVCON2: A( 6):-1289169. -301682. 3825016.; d= 30. ef= 0.41 T=
> 300.0 4
> POISSO> UVCON2: A( 7): 4523998. 468045. 4460310.; d= 37. ef= 0.41 T=
> 250.0 4
> POISSO> UVCON2: A( 7):-1854139. 468045. 4460310.; d= 37. ef= 0.41 T=
> 250.0 4
> POISSO> UVCON2: A( 8): 2225368.-5440386.-2480663.; d= 38. ef= 0.68 T=
> 150.0 4
> POISSO> UVCON2: A( 8):-4152769.-5440386.-2480663.; d= 38. ef= 0.68 T=
> 150.0 4
> POISSO> UVCON2: A( 9): -768814.-5988642. 2063376.; d= 50. ef= 0.50 T=
> 200.0 4
> POISSO> UVCON2: A( 9):-7146951.-5988642. 2063376.; d= 50. ef= 0.50 T=
> 200.0 4
> POISSO> UVCON2: SETGDS: imaging done with one OFFSET tangent plane
> POISSO> UVCON2: Create TEST .UVC230. 1 (UV) on disk 1 cno
> 601
> POISSO> UVCON2: QINIT: did a GET of 1280 Kwords, OFF
> -338365965
> POISSO> UVCON2: UVPREP: Maximum U Baseline is 6.439E+09 lambda.
> POISSO> UVCON2: ALGSTB: All 23 Rows In AP (Max 139)
> POISSO> UVCON2: ALGSTB: Ipol gridded model subtraction, chans 1
> through 1
> POISSO> UVCON2: ALGSTB: Pass 1; 12- 0 Cells, with 71041 Pts
> POISSO> UVCON2: Appears to have ended successfully
> POISSO> UVCON2: poisson 31DEC07 NEW: Cpu= 0.4 Real= 1
>
>
> Under version 'TST' (31DEC08), here's the message output
> POISSO> UVCON2: Task UVCON (release of 31DEC08) begins
> POISSO> UVCON2: ZTXOP2: using translated file name =
> POISSO> UVCON2: ZTXOP2: /home/vfish/arrays/final-230
> POISSO> UVCON2: Number of antennas = 9
> POISSO> UVCON2: Site latitude = 0.000 degrees
> POISSO> UVCON2: Site longtitude = 0.000 degrees
> POISSO> UVCON2: Coordinate conversion factor to meters = 1.00000E+00
> POISSO> UVCON2: Diameter conversion factor to meters = 1.00000E+00
> POISSO> UVCON2: A( 1):-5464523.-2493147. 2150612.; d= 21. ef= 0.50 T=
> 300.0 4
> POISSO> UVCON2: A( 1):*********-2493147. 2150612.; d= 21. ef= 0.50 T=
> 300.0 4
> POISSO> UVCON2: A( 2):-1828796.-5054407. 3427865.; d= 10. ef= 0.59 T=
> 200.0 4
> POISSO> UVCON2: A( 2):-8206933.-5054407. 3427865.; d= 10. ef= 0.59 T=
> 200.0 4
> POISSO> UVCON2: A( 3):-2397431.-4482019. 3843524.; d= 27. ef= 0.55 T=
> 400.0 4
> POISSO> UVCON2: A( 3):-8775568.-4482019. 3843524.; d= 27. ef= 0.55 T=
> 400.0 4
> POISSO> UVCON2: A( 4): -768714.-5988542. 2063276.; d= 32. ef= 0.10 T=
> 291.0 4
> POISSO> UVCON2: A( 4):-7146851.-5988542. 2063276.; d= 32. ef= 0.10 T=
> 291.0 4
> POISSO> UVCON2: A( 5): 2225037.-5441199.-2479303.; d= 12. ef= 0.75 T=
> 200.0 4
> POISSO> UVCON2: A( 5):-4153100.-5441199.-2479303.; d= 12. ef= 0.75 T=
> 200.0 4
> POISSO> UVCON2: A( 6): 5088968. -301682. 3825016.; d= 30. ef= 0.41 T=
> 300.0 4
> POISSO> UVCON2: A( 6):-1289169. -301682. 3825016.; d= 30. ef= 0.41 T=
> 300.0 4
> POISSO> UVCON2: A( 7): 4523998. 468045. 4460310.; d= 37. ef= 0.41 T=
> 250.0 4
> POISSO> UVCON2: A( 7):-1854139. 468045. 4460310.; d= 37. ef= 0.41 T=
> 250.0 4
> POISSO> UVCON2: A( 8): 2225368.-5440386.-2480663.; d= 38. ef= 0.68 T=
> 150.0 4
> POISSO> UVCON2: A( 8):-4152769.-5440386.-2480663.; d= 38. ef= 0.68 T=
> 150.0 4
> POISSO> UVCON2: A( 9): -768814.-5988642. 2063376.; d= 50. ef= 0.50 T=
> 200.0 4
> POISSO> UVCON2: A( 9):-7146951.-5988642. 2063376.; d= 50. ef= 0.50 T=
> 200.0 4
> POISSO> UVCON2: CATOPN: ACCESS DENIED TO DISK*** FOR USER 170
> POISSO> UVCON2: ZABORS: signal 11 received
> POISSO> UVCON2: ABORT!
> Vincent
>
> _______________________________________________
> Daip mailing list
> Daip at listmgr.cv.nrao.edu
> http://listmgr.cv.nrao.edu/mailman/listinfo/daip
>
More information about the Daip
mailing list