[daip] APCAL Bug on 31DEC07 ?
Amy Mioduszewski
amiodusz at nrao.edu
Fri Feb 15 11:51:49 EST 2008
Hi Arnaud,
I've never seen that before. It looks like there is a problem with the tables
since it says it had a problem with a "formatted transfer". I notice that you
are using TYVER and GCVER 2, where are those from?
Also, what type of machine are you running on.
Amy
Arnaud COLLIOUD wrote:
> Dear wise AIPS users/developpers,
>
> I am currently processing a VLBI experiment with AIPS (version 31DEC07)
> and I have trouble with the task 'APCAL'.
> Here is what I get when I run APCAL:
>
> *****in the main windows:
>
> >go apcal
> AIPS 1: Resumes
> >At line 1732 of file /logiciels/aips/aipsroot/31DEC07/LINUX/PREP/APCAL.f
> Fortran runtime error: Expected INTEGER for item 4 in formatted
> transfer, got REAL
> (A6,' FQID=',I3,' TIMERNG= ',8I3)
> ^
>
> *****in the message server windows:
>
> hostna> task #: Message
> ----------------------------------------
> VANOIS> APCAL1: Task APCAL (release of 31DEC07) begins
> VANOIS> APCAL1: Writing SN table 1
>
>
> Any clues about this problem ? I attach the input parameters to the
> email...
> Thanks for your answers !
>
> Arnaud Collioud
>
>
>
> ------------------------------------------------------------------------
>
>> inp
> AIPS 1: APCAL Task to generate an amplitude calibration SN table
> AIPS 1: Adverbs Values Comments
> AIPS 1: ----------------------------------------------------------------
> AIPS 1: INNAME 'RDV66_X' Input UV file name (name)
> AIPS 1: INCLASS 'UVDATA' Input UV file name (class)
> AIPS 1: INSEQ 1 Input UV file name (seq. #)
> AIPS 1: INDISK 1 Input UV file disk unit #
> AIPS 1:
> AIPS 1: ANTENNAS *all 0 Antennas to calibrate
> AIPS 1: SUBARRAY 1 Subarray 0 -> 1
> AIPS 1: STOKES ' ' Stokes type ('R','L',' ')
> AIPS 1: BIF 1 Start IF number
> AIPS 1: EIF 4 End IF number
> AIPS 1: FREQID -1 Freq. ID to calibrate
> AIPS 1: SOURCES *all ' ' Sources to calibrate
> AIPS 1: TIMERANG *all 0 Time range to calibrate
> AIPS 1:
> AIPS 1: TYVER 2 TY table version number.
> AIPS 1: GCVER 2 GC table version number.
> AIPS 1: SNVER 1 Output SN table version.
> AIPS 1: 0 -> highest unique
> AIPS 1: OPCODE ' ' Opacity correction opcode:
> AIPS 1: ' ' -> no opacity corr.
> AIPS 1: 'GRID','GRDR','OPAC','OPCR',
> AIPS 1: 'LESQ' -> fit for opacity
> AIPS 1: APARM *all 0 Calibration parameters:
> AIPS 1: (1) -> B factor (def. 1.0)
> AIPS 1: Opacity parameters:
> AIPS 1: (2) -> ZA limit (deg)
> AIPS 1: (3) >=0 use spillover
> AIPS 1: correction
> AIPS 1: (4) > 0 use all FQ in
> AIPS 1: opac. soln.
> AIPS 1: (5) Limit to sec(z) plotted
> AIPS 1: SOLINT 0.5 Solution interval (min)
> AIPS 1: 0 -> use all data
> AIPS 1: INVERS 0 WX table version number.
> AIPS 1: 0 -> use text file
> AIPS 1: INFILE *all ' ' Text file with weather info.
> AIPS 1: Must be ' ' if using WX
> AIPS 1: table (INVERS).
> AIPS 1: TRECVR *all 0 Receiver temperatures (K);
> AIPS 1: in (R,L) pairs.
> AIPS 1: TAU0 *all 0 Zenith opacities (per ant.)
> AIPS 1: DOFIT *all 0 Fit type (per ant.)
> AIPS 1: -1 -> no opacity correction
> AIPS 1: 0 -> apply TRECVR only
> AIPS 1: 1 -> solve for Trec using
> AIPS 1: fitting method spec.
> AIPS 1: in OPCODE; then apply
> AIPS 1: PRTLEV 0 Print level
> AIPS 1: DOTV 1 TV selection (<0 -> PL file)
> AIPS 1: LTYPE 3 Plot labeling
> AIPS 1: GRCHAN 0 TV Graphics channel to use
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Daip mailing list
> Daip at listmgr.cv.nrao.edu
> http://listmgr.cv.nrao.edu/mailman/listinfo/daip
More information about the Daip
mailing list