[daip] ANBPL
Andy Biggs
adb at roe.ac.uk
Thu May 10 04:41:02 EDT 2007
Hi there. I've just been plotting some MERLIN data that I've run through
FIXWT and was looking at how the new weights varied with elevation. I've
attached the plot that ANBPL produced; it has negative elevations! Am I
doing something wrong? This is DEC07 aips with the following inputs:
AIPS 1: ANBPL Plots/prints u,v data as antenna-based values
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 1203 Data base owner number
AIPS 1: INNAME 'LOCKE-F2' Input UV file name (name)
AIPS 1: INCLASS 'FIXWT' Input UV file name (class)
AIPS 1: INSEQ 7 Input UV file name (seq. #)
AIPS 1: INDISK 2 Input UV file disk unit #
AIPS 1: SOURCES *all ' ' Source list
AIPS 1: QUAL -1 Source qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: SELBAND 0 Bandwidth to select (kHz)
AIPS 1: SELFREQ 0 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: BCHAN 2 Lowest channel number 0=>1
AIPS 1: ECHAN 29 Highest channel number
AIPS 1: 0=>BCHAN
AIPS 1: If BCHAN and ECHAN are
AIPS 1: different, then data will be
AIPS 1: averaged across specified
AIPS 1: channel range before plotting
AIPS 1: BIF 1 Lowest IF number 0=>1
AIPS 1: EIF 1 Highest IF number 0=>high
AIPS 1: AVGIF 0 > 0 => average IFs
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1
AIPS 1: UVRANGE 0 0 Range of projected spacings
AIPS 1: (thousands of wavelengths)
AIPS 1: TIMERANG *all 0 Time: start day,hr,min,sec
AIPS 1: stop day,hr,min,sec.
AIPS 1: STOKES 'RR' Stokes' parameters
AIPS 1: ANTENNAS *all 0 Antennas to be plotted
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: See explanation.
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 0 CL (or SN) table to apply
AIPS 1: DOPOL 0 If >0 correct polarization.
AIPS 1: BLVER 0 BL table to apply.
AIPS 1: FLAGVER -1 Flag table version
AIPS 1: See explanation.
AIPS 1: DOBAND 0 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER 0 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: SUBARRAY 0 Subarray number 0=>1.
AIPS 1: -1 => all, but beware!
AIPS 1: SOLINT 0 Time over which to average
AIPS 1: data before plotting (mins)
AIPS 1: =0 => no averaging
AIPS 1: >0 SOLINT=MIN(SOLINT, SCAN)
AIPS 1: <0 SOLINT=ABS(SOLINT)
AIPS 1: average through scans
AIPS 1: DO3COL 1 Plot separate IFs in separate
AIPS 1: colors.
AIPS 1: OPCODE ' ' Type of plot:
AIPS 1: 'ALIF' => combine all IFs
AIPS 1: 'ALST' => combine all Stokes
AIPS 1: 'ALSI' => all IFs & Stokes
AIPS 1: BPARM 5 17 Control parameters
AIPS 1: *rest 0 1 : X-axis type code
AIPS 1: 2 : Y-axis type code;
AIPS 1: if <0 => AMP & PHASE
AIPS 1: plotted together
AIPS 1: 3 : >0.0 => fixed scale
AIPS 1: <0.0 => fixed range
AIPS 1: 0.0 => sep. scales
AIPS 1: 4 : Xmin (fixed scale)
AIPS 1: 5 : Xmax (fixed scale)
AIPS 1: 6 : Ymin (fixed scale)
AIPS 1: 7 : Ymax (fixed scale)
AIPS 1: 8 : Ymin (phase plot)
AIPS 1: 9 : Ymax (phase plot)
AIPS 1: 10: > 0 scalar average
AIPS 1: = 0 vector average
AIPS 1: NPLOTS 7 Max number of plots per page.
AIPS 1: 0 => 3; If bparm(2)<0 =>
AIPS 1: Max number of pairs of plots.
AIPS 1: SYMBOL 0 Symbol to use when plotting.
AIPS 1: 0 => Vertical line
AIPS 1: 1 - 23, standard types
AIPS 1: LTYPE 3 Type of labeling: 1 border,
AIPS 1: 2 no ticks, 3 - 6 standard,
AIPS 1: 7 - 10 only tick labels
AIPS 1: <0 -> no date/time
AIPS 1: DOTV 1 = 0 do no plot
AIPS 1: > 0 Do plot on the TV
AIPS 1: < 0 make a plot file
AIPS 1: GRCHAN 0 TV Graphics channel 0 => 1
AIPS 1: DOCRT 0 0 -> do no printer display,
AIPS 1: > 0 -> use the terminal,
AIPS 1: else use the line printer
AIPS 1: > 72 => terminal width
AIPS 1: OUTPRINT *all ' ' Printer disk file to save
AIPS 1: NDIG 0 Number of digits in display
Also, the help file says that the default plotting is 'real' vs 'time'
whereas it appears to be 'weight' vs 'time'.
Andy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ANBPL.PS.gz
Type: application/octet-stream
Size: 152613 bytes
Desc:
URL: <http://listmgr.nrao.edu/pipermail/daip/attachments/20070510/657913bd/attachment.obj>
More information about the Daip
mailing list