[daip] Problem reducing data from AK403
Amy Mioduszewski
amiodusz at nrao.edu
Tue Jul 31 11:36:06 EDT 2007
Hi Melanie,
Sorry we were understaffed for a bit. What version of AIPS are you using? I
don't think the FILLM messages have anything to do with it. I revamped VLACAL
recently so I am wondering if I introduced a bug. If you have a recent version
of AIPS try running VLACALIB with UVRANGE 0. This will trigger the use of a
model for your calibrator.
Amy
Melanie Gendre wrote:
> Hi,
>
> My name is Melanie and I am trying to get data reduced from the program
> AK403 in X band and I am having some trouble (I've reduced data for 9
> other programs without problems).
>
> I load the program in AIPS using fillm without problem, except the message:
> localh> FILLM1: Number bad nominal sensitivities: ant 12 IF 1 = 1
> localh> FILLM1: Number bad nominal sensitivities: ant 12 IF 2 = 1
>
> The summary of observation tells me that the primary calibrator is 1328+307.
> Looking at the antenna location, I chose antenna 4 as reference. Looking
> at the antenna with listr doesn't show any major problem.
>
> I set the flux of the primary using setjy, it works.
> Then, when I try to calibrate with vlacal, it dies.
>
> I enter:
>> run vlaprocs
>> task 'vlacalib' ; default
>> getn 1
>> calsour '1328+307'; uvrange 0 400; refant 4
>> calcode '*';snver 1; doprint 0
>> minamp 10; minph 10; freqid 1; vlacal
>
> and I get the following message:
> localh> CALIB1: CALIB USING AK403_UV . X BAND . 1 DISK= 1 USID=2403
> localh> CALIB1: Selecting and editing the data
> localh> CALIB1: Doing cal transfer mode with point model for each source
> localh> CALIB1: This is not self-calibration
> localh> CALIB1: Dividing data by source flux densities
> localh> CALIB1: Determining solutions using amp-scalar averaging
> localh> CALIB1: Writing SN table 1
> localh> CALIB1: RPOL, IF= 1 The average gain over these antennas is
> 0.000E+00
> localh> CALIB1: RPOL, IF= 2 The average gain over these antennas is
> 0.000E+00
> localh> CALIB1: LPOL, IF= 1 The average gain over these antennas is
> 0.000E+00
> localh> CALIB1: LPOL, IF= 2 The average gain over these antennas is
> 0.000E+00
> localh> CALIB1: ERROR: NO VALID SOLUTIONS FOUND
> localh> CALIB1: Purports to die of UNNATURAL causes
> localh> CALIB1: localhost 31DEC07 TST: Cpu= 0.1 Real= 1
>
>
> I tried changing 1328+307 by 1331+305 or 3C286, I tried changing the ref
> antenna, but nothing works.
>
> Any ideas?
>
> Thank you
> Melanie
>
More information about the Daip
mailing list