[daip] APCAL

[Z.-Q. Shen]

Hi Eric,

Ok, below is a full copy of all the inputs for two CLCAL run.

For the 1st run,

AIPS 1: INNAME     'ZSHEN1      '          Input UV file name (name)
AIPS 1: INCLASS    'VBGLU '                Input UV file name (class)
AIPS 1: INSEQ         1                    Input UV file name (seq. #)
AIPS 1: INDISK        0                    Input UV file disk unit #
AIPS 1: SOURCES    *all ' '                Source list to calibrate
AIPS 1: SOUCODE    '    '                  Source "Cal codes"
AIPS 1: CALSOUR    *all ' '                Cal sources for calibration
AIPS 1: QUAL         -1                    Source qualifier -1=>all
AIPS 1: CALCODE    '    '                  Calibrator code '    '=>all
AIPS 1: TIMERANG   *all 0                  Time range to calibrate
AIPS 1: SUBARRAY      0                    Subarray, 0=>all,
AIPS 1: ANTENNAS   *all 0                  Antennas selected, 0=> all
AIPS 1: SELBAND      -1                    Bandwidth to select (kHz)
AIPS 1: SELFREQ      -1                    Frequency to select (MHz)
AIPS 1: FREQID       -1                    Freq. ID to select.
AIPS 1: OPCODE     'MERG'                  Operation 'MERG','CALI',
AIPS 1:                                    'SMOO','CALP'; ' ' => 'CALI'
AIPS 1: INTERPOL   'SELF'                  Interpolation function,
AIPS 1:                                    choices are:
AIPS 1:                                    '2PT','SIMP','AMBG','CUBE',
AIPS 1:                                    'SELF','POLY','MWF','BOX'
AIPS 1:                                    see HELP for more details.
AIPS 1: INTPARM    *all 0                  Interpolation parameters
AIPS 1: DOBLANK       0                    Blanked value smoothing. Only
AIPS 1:                                    used for INTERPOL='BOX','MWF'
AIPS 1:                                    =>0 forces SMOTYPE='FULL'
AIPS 1: CUTOFF        0                    Interpolation limit in
AIPS 1:                                    time (min); 0=> no limit.
AIPS 1: SMOTYPE    '    '                  Data to smooth
AIPS 1: SNVER         0                    Input SN table, 0=>all.
AIPS 1: GAINVER       0                    Input Cal table 0=>1
AIPS 1: GAINUSE       0                    Output CAL table 0=>2
AIPS 1: REFANT        8                    Reference antenna 0=>pick.
AIPS 1: BADDISK    *all 0                  Disks to avoid for scratch

and for the 2nd run
AIPS 1: INNAME     'ZSHEN1      '          Input UV file name (name)
AIPS 1: INCLASS    'VBGLU '                Input UV file name (class)
AIPS 1: INSEQ         1                    Input UV file name (seq. #)
AIPS 1: INDISK        0                    Input UV file disk unit #
AIPS 1: SOURCES    *all ' '                Source list to calibrate
AIPS 1: SOUCODE    '    '                  Source "Cal codes"
AIPS 1: CALSOUR    *all ' '                Cal sources for calibration
AIPS 1: QUAL         -1                    Source qualifier -1=>all
AIPS 1: CALCODE    '    '                  Calibrator code '    '=>all
AIPS 1: TIMERANG   *all 0                  Time range to calibrate
AIPS 1: SUBARRAY      0                    Subarray, 0=>all,
AIPS 1: ANTENNAS   *all 0                  Antennas selected, 0=> all
AIPS 1: SELBAND      -1                    Bandwidth to select (kHz)
AIPS 1: SELFREQ      -1                    Frequency to select (MHz)
AIPS 1: FREQID       -1                    Freq. ID to select.
AIPS 1: OPCODE     '    '                  Operation 'MERG','CALI',
AIPS 1:                                    'SMOO','CALP'; ' ' => 'CALI'
AIPS 1: INTERPOL   '    '                  Interpolation function,
AIPS 1:                                    choices are:
AIPS 1:                                    '2PT','SIMP','AMBG','CUBE',
AIPS 1:                                    'SELF','POLY','MWF','BOX'
AIPS 1:                                    see HELP for more details.
AIPS 1: INTPARM    *all 0                  Interpolation parameters
AIPS 1: DOBLANK       0                    Blanked value smoothing. Only
AIPS 1:                                    used for INTERPOL='BOX','MWF'
AIPS 1:                                    =>0 forces SMOTYPE='FULL'
AIPS 1: CUTOFF        0                    Interpolation limit in
AIPS 1:                                    time (min); 0=> no limit.
AIPS 1: SMOTYPE    '    '                  Data to smooth
AIPS 1: SNVER        10                    Input SN table, 0=>all.
AIPS 1: GAINVER       2                    Input Cal table 0=>1
AIPS 1: GAINUSE       3                    Output CAL table 0=>2
AIPS 1: REFANT        8                    Reference antenna 0=>pick.
AIPS 1: BADDISK    *all 0                  Disks to avoid for scratch

Regards,
Zhiqiang


>Amy asked for ALL adverbs to the program.  Please do a copy of the
>screen from an INPUTS so that she may see ALL adverbs.  You list a few
>that you think are important but you may not realize the importance or
>effect of others.
>
>Eric Greisen