[daip] more information on LISTR error
Larry Maddox
maddox at nhn.ou.edu
Thu Jun 17 12:47:53 EDT 2004
hello,
when i encountered the LISTR error message, i was running on a SUL
architecture. using the same data set, things worked smoothly on a LINUX
system
i did try to load some older (1990-1992) VLA archived data onto the linux
system using FILLM and received the following errors:
for first set: AC270_A900630.xp1
>go
FILLM1: Task FILLM (release of 31DEC04) begins
FILLM1: Shadow flag limit = 2.500E+01 meters.
FILLM1: Opacity correction in CL table weighted average of weather and
FILLM1: season. Weight for weather = 0.50
FILLM1: Gain curve correction in CL table read from file,
FILLM1: with variation as function of antenna and band.
FILLM1: Opening FITS:AC270_A900630.xp1
FILLM1: *** caution: CPARM(6) is 0 and VLAOBS is blank ***
FILLM1: ** subarray defaults to 1. It is recommended ***
FILLM1: *** to run FILLM with non-blank VLAOBS. ***
FILLM1: tape file # 1, start date/time = 19900630/22:12:40
FILLM1: MCINI: Processing Correlator Code ' ' with 27 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Program = AC270 ; Tape revision number = 24.
FILLM1: Create 19900630 .L BAND. 2 (UV) on disk 1 cno 130
FILLM1: Ref. date = 19900630 A-C = 1.452400 B-D = 1.502400 GHz
FILLM1: FLMFQ: FQ entry tolerance = 1.000E+02 1.000E+02
FILLM1: Found 1328+307 : 0 25.000 MHz at IAT 0/ 22:12:40.0
AIPS 1: Resumes
>FILLM1: FLDKIO: LBYTES= 15018 BUT IERR = 0
FILLM1: Read 0 visibilities from 1 files
FILLM1: Appears to have ended successfully
FILLM1: cthulu 31DEC04 TST: Cpu= 0.1 Real= 5
for the second set: AC270_B901014.xp1
>go
FILLM1: Task FILLM (release of 31DEC04) begins
FILLM1: Shadow flag limit = 2.500E+01 meters.
FILLM1: Opacity correction in CL table weighted average of weather and
FILLM1: season. Weight for weather = 0.50
FILLM1: Gain curve correction in CL table read from file,
FILLM1: with variation as function of antenna and band.
FILLM1: Opening FITS:AC270_B901014.xp1
FILLM1: *** caution: CPARM(6) is 0 and VLAOBS is blank ***
FILLM1: ** subarray defaults to 1. It is recommended ***
FILLM1: *** to run FILLM with non-blank VLAOBS. ***
FILLM1: tape file # 1, start date/time = 19901014/14:58:30
FILLM1: MCINI: Processing Correlator Code ' ' with 27 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: PROBLEM IN CORRECTING RECORD POSITION ON DISK
FILLM1: ZDKMID: LSEEK ERROR ON FILE DESCRIPTOR 3
FILLM1: ZDKMID: POSITIONING FILE POINTER TO BYTE OFFSET -1864738816
FILLM1: FLDKIO: ERROR 3 DOING I/O WITH OPCODE = READ
FILLM1: Program = AC270 ; Tape revision number = 24.
FILLM1: Create 19901014 .C BAND. 3 (UV) on disk 1 cno 131
FILLM1: Ref. date = 19901014 A-C = 4.872600 B-D = 4.822600 GHz
FILLM1: FLMFQ: FQ entry tolerance = 1.000E+02 1.000E+02
FILLM1: Found 1328+307 : 0 25.000 MHz at IAT 0/ 14:58:30.0
FILLM1: PROBLEM IN CORRECTING RECORD POSITION ON DISK
FILLM1: ZDKMID: LSEEK ERROR ON FILE DESCRIPTOR 3
FILLM1: ZDKMID: POSITIONING FILE POINTER TO BYTE OFFSET -1864738816
FILLM1: FLDKIO: ERROR 3 DOING I/O WITH OPCODE = READ
FILLM1: PROBLEM IN CORRECTING RECORD POSITION ON DISK
FILLM1: ZDKMID: LSEEK ERROR ON FILE DESCRIPTOR 3
FILLM1: ZDKMID: POSITIONING FILE POINTER TO BYTE OFFSET -1864738816
FILLM1: FLDKIO: ERROR 3 DOING I/O WITH OPCODE = READ
FILLM1: PROBLEM IN CORRECTING RECORD POSITION ON DISK
FILLM1: ZDKMID: LSEEK ERROR ON FILE DESCRIPTOR 3
FILLM1: ZDKMID: POSITIONING FILE POINTER TO BYTE OFFSET -1864738816
FILLM1: FLDKIO: ERROR 3 DOING I/O WITH OPCODE = READ
FILLM1: PROBLEM IN CORRECTING RECORD POSITION ON DISK
FILLM1: ZDKMID: LSEEK ERROR ON FILE DESCRIPTOR 3
FILLM1: ZDKMID: POSITIONING FILE POINTER TO BYTE OFFSET -1864738816
FILLM1: FLDKIO: ERROR 3 DOING I/O WITH OPCODE = READ
FILLM1: PROBLEM IN CORRECTING RECORD POSITION ON DISK
FILLM1: ZDKMID: LSEEK ERROR ON FILE DESCRIPTOR 3
FILLM1: ZDKMID: POSITIONING FILE POINTER TO BYTE OFFSET -1864738816
FILLM1: FLDKIO: ERROR 3 DOING I/O WITH OPCODE = READ
FILLM1: PROBLEM IN CORRECTING RECORD POSITION ON DISK
FILLM1: ZDKMID: LSEEK ERROR ON FILE DESCRIPTOR 3
FILLM1: ZDKMID: POSITIONING FILE POINTER TO BYTE OFFSET -1864738816
FILLM1: FLDKIO: ERROR 3 DOING I/O WITH OPCODE = READ
FILLM1: PROBLEM IN CORRECTING RECORD POSITION ON DISK
FILLM1: ZDKMID: LSEEK ERROR ON FILE DESCRIPTOR 3
FILLM1: ZDKMID: POSITIONING FILE POINTER TO BYTE OFFSET -1864738816
FILLM1: FLDKIO: ERROR 3 DOING I/O WITH OPCODE = READ
FILLM1: PROBLEM IN CORRECTING RECORD POSITION ON DISK
FILLM1: ZDKMID: LSEEK ERROR ON FILE DESCRIPTOR 3
FILLM1: ZDKMID: POSITIONING FILE POINTER TO BYTE OFFSET -1864738816
FILLM1: FLDKIO: ERROR 3 DOING I/O WITH OPCODE = READ
FILLM1: PROBLEM IN CORRECTING RECORD POSITION ON DISK
FILLM1: ZDKMID: LSEEK ERROR ON FILE DESCRIPTOR 3
...
...
FILLM1: PROBLEM IN CORRECTING RECORD POSITION ON DISK
FILLM1: ZDKMID: LSEEK ERROR ON FILE DESCRIPTOR 3
FILLM1: ZDKMID: POSITIONING FILE POINTER TO BYTE OFFSET -1864738816
FILLM1: FLDKIO: ERROR 3 DOING I/O WITH OPCODE = READ
FILLM1: PROBLEM IN CORRECTING RECORD POSITION ON DISK
FILLM1: ZDKMID: LSEEK ERROR ON FILE DESCRIPTOR 3
FILLM1: ZDKMID: POSITIONING FILE POINTER TO BYTE OFFSET -1864738816
FILLM1: FLDKIO: ERROR 3 DOING I/O WITH OPCODE = READ
FILLM1: PROBLEM IN CORRECTING RECORD POSITION ON DISK
FILLM1: ZDKMID: LSEEK ERROR ON FILE DESCRIPTOR 3
FILLM1: ZDKMID: POSITIONING FILE POINTER TO BYTE OFFSET -1864738816
FILLM1: FLDKIO: ERROR 3 DOING I/O WITH OPCODE = READ
FILLM1: PROBLEM IN CORRECTING RECORD POSITION ON DISK
FILLM1: ZDKMID: LSEEK ERROR ON FILE DESCRIPTOR 3
FILLM1: ZDKMID: POSITIONING FILE POINTER TO BYTE OFFSET -1864738816
FILLM1: FLDKIO: ERROR 3 DOING I/O WITH OPCODE = READ
FILLM1: Read 0 visibilities from 1 files
FILLM1: Encountered 51 parity errors on tape
FILLM1: Appears to have ended successfully
FILLM1: cthulu 31DEC04 TST: Cpu= 0.5 Real= 0
this is more information than i receive (LINUX) than when i try the same
task on the SUL system:
for second set: AC270_B901014.xp1
>go
FILLM1: Task FILLM (release of 31DEC04) begins
FILLM1: Shadow flag limit = 2.500E+01 meters.
FILLM1: Opacity correction in CL table weighted average of weather and
FILLM1: season. Weight for weather = 0.50
FILLM1: Gain curve correction in CL table read from file,
FILLM1: with variation as function of antenna and band.
FILLM1: Opening FITS:AC270_B901014.xp1
FILLM1: *** caution: CPARM(6) is 0 and VLAOBS is blank ***
FILLM1: ** subarray defaults to 1. It is recommended ***
FILLM1: *** to run FILLM with non-blank VLAOBS. ***
FILLM1: tape file # 1, start date/time = 19901014/14:58:30
FILLM1: MCINI: Processing Correlator Code ' ' with 27 antennas.
AIPS 1: Resumes
>FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: ZABORS: signal 8 received
FILLM1: ABORT!
lam
More information about the Daip
mailing list