[daip] Problem loading a data set with FILLM
Jason Wurnig
jwurnig at aoc.nrao.edu
Tue Dec 28 11:25:42 EST 2004
Hi daip,
An observer (and now I) encountered some problems attempting to load a
VLA data set from the archive (AS813 obs. date 2004DEC24) into AIPS with
task FILLM.
The inputs for FILLM are:
...
>inp
AIPS 1: FILLM Task to read a VLA archive tape
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: INTAPE 0 Tape drive number
AIPS 1: INFILE 'PUB:AS813_C041224.xp '
AIPS 1: Non-blank: disk file name
AIPS 1: NFILES 0 Number of files to advance
AIPS 1: Also applies to ON-LINE!
AIPS 1: BAND ' ' Freq. band (4,P,L,C,X,U,K,Q)
AIPS 1: QUAL -1 Source qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code
AIPS 1: VLAOBS 'AS813 ' VLA obs. pgm. name ('AZ99')
AIPS 1: VLAMODE ' ' VLA obs. mode (' '=any)
AIPS 1: REFDATE '20041224' Reference date. 'yyyymmdd'
AIPS 1: TIMERANG *all 0 Timerange selected
AIPS 1: BCHAN 1 First spectral channel
AIPS 1: ECHAN 0 Highest spectral channel
AIPS 1: OUTNAME 'AS813.041224' Output UV file name (name)
AIPS 1: OUTSEQ 0 Output UV file name (seq. #)
AIPS 1: OUTDISK 2 Output UV file disk unit #.
AIPS 1: DOUVCOMP -1 1 (T) => compressed data
AIPS 1: DOALL 1 1 (T) => write all data.
AIPS 1: DOCONCAT 1 1 (T) => append data to old
AIPS 1: files
AIPS 1: NCOUNT 1 Number of files to read
AIPS 1: DOWEIGHT 1 Use nominal sensitivity to
AIPS 1: scale weights?
AIPS 1: = 10, use Memo 108 weights
AIPS 1: DOACOR -1 Load autocorrelation data?
AIPS 1: CPARM *all 0 User options.
AIPS 1: 1 => Avg. time (seconds)
AIPS 1: 2 => bitmap (see help)
AIPS 1: = 16 for planets & Sun
AIPS 1: 3 => Max. OK IF status
AIPS 1: <=3 => 3
AIPS 1: 4 => Control dropping of
AIPS 1: shadowed data
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#go
AIPS 1: Resumes
>
...
The message I receive is:
...
agave > FILLM1: Task FILLM (release of 31DEC05) begins
agave > FILLM1: Shadow flag limit = 2.500E+01 meters.
agave > FILLM1: Opacity correction in CL table weighted average of weather and
agave > FILLM1: season. Weight for weather = 0.50
agave > FILLM1: Gain curve correction in CL table read from file,
agave > FILLM1: with variation as function of antenna and band.
agave > FILLM1: Opening PUB:AS813_C041224.xp1
agave > FILLM1: tape file # 1, start date/time = 20041224/06:33:40
agave > FILLM1:
agave > FILLM1: *** ATTENTION - default: loading subarray 1 ***
agave > FILLM1:
agave > FILLM1: MCINI: Processing Correlator Code 'PA ' with 25 antennas.
agave > FILLM1: MCINI - Mode PA
agave > FILLM1: Program = AS813 ; Tape revision number = 26.
agave > FILLM1: Create AS813.041224.CH 0 . 1 (UV) on disk 2 cno 1
agave > FILLM1: Ref. date = 20041224 A-C = 43.114616 B-D = 43.114616 GHz
agave > FILLM1: Create AS813.041224.LINE . 1 (UV) on disk 2 cno 2
agave > FILLM1: Ref. date = 20041224 A-C = 43.114616 B-D = 43.114616 GHz
agave > FILLM1: FLMFQ: FQ entry tolerance = 4.890D+03
agave > FILLM1: Found 0423-013 : 1 3.125 MHz at IAT 0/ 06:34:00.0
agave > FILLM1: Zenith opacity set to 0.063
agave > FILLM1: Trying to access VLA antenna gains file...
agave > FILLM1: ZTXOP2: using translated file name =
agave > FILLM1: ZTXOP2: /home/AIPS/TEXT/IONS/VLA.GAINS
agave > FILLM1: ZABORS: signal 8 received
agave > FILLM1: ABORT!
...
The archive data file AS813_C041224.xp1 is located on /home/agave4/ftp/pub on
machine agave. The AIPS files that were started with FILLM are located on
machine agave, AIPS disk 2, AIPS user # 14.
Can you tell what I am doing wrong?
Regards,
Jason
More information about the Daip
mailing list