[daip] FILLM failure
Michael Rupen
mrupen at aoc.nrao.edu
Sun Jan 19 13:00:44 EST 2003
Hello Daip,
in accordance with Jim's directive that we tell daip about FILLM failures,
here's the latest. I started on-line FILLM on verdi on Saturday morning
18jan03 around 7am; it's still running as I type, on the morning of the
next day, having found no data. However, the experiment ran happily around
1:30-3:00pm or so on Saturday. I ran on-line FILLM with the identical
inputs for a run in the same monitoring program on the 16th, and the data
came in perfectly. I append the inputs to FILLM below, along with the
initial output and a sampling of the "Fetching...." lines in case that's
helpful.
Cheers,
Michael
================================================================================
>tget fillm
AIPS 2: Found in Version=ONLINE
>inp
AIPS 2: Found in Version=ONLINE
AIPS 2: FILLM Task to read a VLA archive tape
AIPS 2: Adverbs Values Comments
AIPS 2: ----------------------------------------------------------------
AIPS 2: INTAPE 1 Tape drive number
AIPS 2: INFILE ' '
AIPS 2: Non-blank: disk file name
AIPS 2: NFILES 0 Number of files to advance
AIPS 2: BAND ' ' Freq. band (4,P,L,C,X,U,K,Q)
AIPS 2: QUAL -1 Source qualifier -1=>all
AIPS 2: CALCODE ' ' Calibrator code
AIPS 2: VLAOBS 'AR508 ' VLA obs. pgm. name ('AZ99')
AIPS 2: VLAMODE ' ' VLA obs. mode (' '=any)
AIPS 2: REFDATE ' ' Reference date. 'yyyymmdd'
AIPS 2: TIMERANG *all 0 Timerange selected
AIPS 2: BCHAN 1 First spectral channel
AIPS 2: ECHAN 0 Highest spectral channel
AIPS 2: OUTNAME ' ' Output UV file name (name)
AIPS 2: OUTSEQ 0 Output UV file name (seq. #)
AIPS 2: OUTDISK 1 Output UV file disk unit #.
AIPS 2: DOUVCOMP -1 1 (T) => compressed data
AIPS 2: DOALL 1 1 (T) => write all data.
AIPS 2: DOCONCAT -1 1 (T) => append data to old
AIPS 2: files
AIPS 2: NCOUNT 0 Number of files to read
AIPS 2: DOWEIGHT 1 Use nominal sensitivity to
AIPS 2: scale weights?
AIPS 2: DOACOR 0 Load autocorrelation data?
AIPS 2: CPARM 0 0 User options.
AIPS 2: 0 0 1 => Avg. time (seconds)
AIPS 2: 0 0 2 => bitmap (see help)
AIPS 2: 0 0.1667 = 16 for planets & Sun
AIPS 2: 0 0 3 => Max. OK IF status
AIPS 2: <=3 => 3
AIPS 2: 4 => Control dropping of
AIPS 2: shadowed data
AIPS 2: < 0 => no shadow check
AIPS 2: 0 => 25 m limit
AIPS 2: > 0 => Shadow limit is
AIPS 2: CPARM(4) in meters
AIPS 2: 5 = channel code (see HELP)
AIPS 2: 6 => Subarray number-see HELP
AIPS 2: 7 => FQ entry tolerance (kHz)
AIPS 2: (see HELP)
AIPS 2: 8 => CL table time incr. min
AIPS 2: 9 => TY table time incr. min
AIPS 2: 10=> Calibrator avg. time
AIPS 2: DPARM *all 0 Selection by Frequency
AIPS 2: 1+2 => A Frequency (Hz)
AIPS 2: 3+4 => B Frequency (Hz)
AIPS 2: 5+6 => C Frequency (Hz)
AIPS 2: 7+8 => D Frequency (Hz)
AIPS 2: 9 => tolerance for A&C
AIPS 2: 10 => tolerance for B&D
AIPS 2: BPARM -1 -1 Opacity and Gain curve
AIPS 2: *rest 0 control (see help)
AIPS 2: IN2FILE ' '
AIPS 2: Antenna gains file
================================================================================
>prta 'fillm';docrt 1;prtmsg
verdi AIPS (31DEC03) 11 19-JAN-2003 10:58:39 Page 1
Pops Prior Date Time Task Messages for user 11
2 5 18-JAN-2003 06:59:32 FILLM Task FILLM (release of 31DEC02) begins
2 4 18-JAN-2003 06:59:32 FILLM Shadow flag limit = 2.500E+01 meters.
2 3 18-JAN-2003 06:59:32 FILLM No opacity correction in CL table.
2 3 18-JAN-2003 06:59:32 FILLM No gain curve correction in CL table.
2 3 18-JAN-2003 06:59:32 FILLM Welcome to real-time FILLM!
AIPS 2: User 11: 28 messages, oldest written 18-JAN-2003 06:59:23
AIPS 2: Printed 5 messages
>doall -1 ; spy
AIPS 2: AIPS processes on verdi 19-JAN-2003 at 10:59:24
mrupen 9950 0.0 0.1 2196 604 pts/7 S Jan08 0:00 TPMON1
mrupen 16341 0.0 0.4 5332 2384 pts/2 S Jan14 0:00 AIPS2
mrupen 23224 0.0 0.5 5452 3036 pts/7 S Jan16 1:17 AIPS1
mrupen 29327 65.5 1.2 12200 6304 pts/2 R Jan18 1101:09 FILLM2
Sample of most recent Fetching lines:
Fetching..........................Fetched. Sun Jan 19 10:59:33 2003
Fetching..........................Fetched. Sun Jan 19 10:59:42 2003
Fetching..........................Fetched. Sun Jan 19 10:59:52 2003
etc. etc. etc.
================================================================================
More information about the Daip
mailing list