[daip] on-line FILLM dies occasionally when first started
Michael Rupen
mrupen at aoc.nrao.edu
Tue Sep 17 19:17:27 EDT 2002
Hi Eric,
I just started on-line FILLM, and got the rather odd result that it died
instantly; but upon re-starting, it seems to work fine. This has happened
to me a couple times over the past few weeks but this is the first time it
was early enough for me to remember to e-mail you :}
I append the inputs to FILLM below -- I use identical inputs all the time,
so I doubt I'm doing anything too strange. I always run on verdi, so it
could be a local problem.
Cheers,
Michael
>go fillm
AIPS 2: Found in Version=ONLINE
FILLM2: Task FILLM (release of 31DEC01) begins
FILLM2: Shadow flag limit = 2.500E+01 meters.
FILLM2: Welcome to real-time FILLM!
Connecting...Connected.
bad recv status of: No such file or directory
The aoc_clnt process has terminated unexpectedly.error on calling setitimer: Interrupted system call
FILLM2: No data found meeting selection criteria!
FILLM2: Read 0 visibilities from999 files
FILLM2: Appears to have ended successfully
FILLM2: verdi 31DEC01 NEW: Cpu= 0.0 Real= 0
AIPS 2: Resumes
>
>
>go fillm
AIPS 2: Found in Version=ONLINE
FILLM2: Task FILLM (release of 31DEC01) begins
FILLM2: Shadow flag limit = 2.500E+01 meters.
FILLM2: Welcome to real-time FILLM!
Connecting...Connected.
AIPS 2: Resumes
>Fetching.......Fetched. Tue Sep 17 17:14:29 2002
Fetching.......Fetched. Tue Sep 17 17:14:39 2002
Fetching.......Fetched. Tue Sep 17 17:14:49 2002
2 3 FILLM2: tape file # 1, start date/time = 20020917/23:14:40
Fetching.......Fetched. Tue Sep 17 17:14:59 2002
Fetching.......Fetched. Tue Sep 17 17:15:09 2002
...etc.
FILLM inputs:
AIPS 2: Found in Version=ONLINE
AIPS 2: FILLM Task to read a VLA archive tape
AIPS 2: Adverbs Values Comments
AIPS 2: ----------------------------------------------------------------
AIPS 2: INTAPE 1 Tape drive number
AIPS 2: NFILES 0 Number of files to advance
AIPS 2: BAND ' ' Freq. band (4,P,L,C,X,U,K,Q)
AIPS 2: QUAL -1 Source qualifier -1=>all
AIPS 2: CALCODE ' ' Calibrator code
AIPS 2: VLAOBS 'AR476 ' VLA obs. pgm. name ('AZ99')
AIPS 2: VLAMODE ' ' VLA obs. mode (' '=any)
AIPS 2: REFDATE ' ' Reference date. 'yyyymmdd'
AIPS 2: TIMERANG *all 0 Timerange selected
AIPS 2: BCHAN 1 First spectral channel
AIPS 2: ECHAN 0 Highest spectral channel
AIPS 2: OUTNAME ' ' Output UV file name (name)
AIPS 2: OUTSEQ 0 Output UV file name (seq. #)
AIPS 2: OUTDISK 1 Output UV file disk unit #.
AIPS 2: DOUVCOMP -1 1 (T) => compressed data
AIPS 2: DOALL 1 1 (T) => write all data.
AIPS 2: DOCONCAT -1 1 (T) => append data to old
AIPS 2: files
AIPS 2: NCOUNT 0 Number of files to read
AIPS 2: DOWEIGHT 1 Use nominal sensitivity to
AIPS 2: scale weights?
AIPS 2: DOACOR 0 Load autocorrelation data?
AIPS 2: CPARM 0 0 User options.
AIPS 2: 0 0 1 => Avg. time (seconds)
AIPS 2: 0 0 2 => bitmap (see help)
AIPS 2: 0 0.1667 = 16 for planets & Sun
AIPS 2: 0 0 3 => Max. OK IF status
AIPS 2: <=3 => 3
AIPS 2: 4 => Control dropping of
AIPS 2: shadowed data
AIPS 2: < 0 => no shadow check
AIPS 2: 0 => 25 m limit
AIPS 2: > 0 => Shadow limit is
AIPS 2: CPARM(4) in meters
AIPS 2: 5 = channel code (see HELP)
AIPS 2: 6 => Subarray number-see HELP
AIPS 2: 7 => FQ entry tolerance (kHz)
AIPS 2: (see HELP)
AIPS 2: 8 => CL table time incr. min
AIPS 2: 9 => TY table time incr. min
AIPS 2: 10=> Calibrator avg. time
AIPS 2: DPARM *all 0 Selection by Frequency
AIPS 2: 1+2 => A Frequency (Hz)
AIPS 2: 3+4 => B Frequency (Hz)
AIPS 2: 5+6 => C Frequency (Hz)
AIPS 2: 7+8 => D Frequency (Hz)
AIPS 2: 9 => tolerance for A&C
AIPS 2: 10 => tolerance for B&D
AIPS 2: BPARM -1 -1 Opacity and Gain curve
AIPS 2: *rest 0 control (see help)
AIPS 2: INFILE ' '
AIPS 2: Antenna gains file
More information about the Daip
mailing list