[daip] problem with FILAIP
root
root at atavistic.harvard.edu
Thu Apr 25 19:16:24 EDT 2002
Hi,
I'm trying to install the 31DEC02 version of AIPS for RedHat 7.0.2 and I'm
having a problem running FILAIP and I believe it is because install.pl
didn't create a DADEVS.SH file. How would I fix this problem. Thank you
very much -- Yosi
-------------- next part --------------
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
#; Copyright (C) 1995
#; Associated Universities, Inc. Washington DC, USA.
#;
#; This program is free software; you can redistribute it and/or
#; modify it under the terms of the GNU General Public License as
#; published by the Free Software Foundation; either version 2 of
#; the License, or (at your option) any later version.
#;
#; This program is distributed in the hope that it will be useful,
#; but WITHOUT ANY WARRANTY; without even the implied warranty of
#; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#; GNU General Public License for more details.
#;
#; You should have received a copy of the GNU General Public
#; License along with this program; if not, write to the Free
#; Software Foundation, Inc., 675 Massachusetts Ave, Cambridge,
#; MA 02139, USA.
#;
#; Correspondence concerning AIPS should be addressed as follows:
#; Internet email: aipsmail at nrao.edu.
#; Postal address: AIPS Project Office
#; National Radio Astronomy Observatory
#; 520 Edgemont Road
#; Charlottesville, VA 22903-2475 USA
#-----------------------------------------------------------------------
# DADEVS.LIST
#-----------------------------------------------------------------------
# This is a DADEVS list file containing a list of AIPS data directories.
# Refer to $AIPS_ROOT/DADEVS.SH for more information.
#-----------------------------------------------------------------------
- /root/AIPS/DATA/atavistic_1
- /root/AIPS/DATA/atavistic_2
- /root/AIPS/DATA/atavistic_3
-------------- next part --------------
#-----------------------------------------------------------------------
#; Copyright (C) 1996, 2000-2002
#; Associated Universities, Inc. Washington DC, USA.
#;
#; This program is free software; you can redistribute it and/or
#; modify it under the terms of the GNU General Public License as
#; published by the Free Software Foundation; either version 2 of
#; the License, or (at your option) any later version.
#;
#; This program is distributed in the hope that it will be useful,
#; but WITHOUT ANY WARRANTY; without even the implied warranty of
#; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#; GNU General Public License for more details.
#;
#; You should have received a copy of the GNU General Public
#; License along with this program; if not, write to the Free
#; Software Foundation, Inc., 675 Massachusetts Ave, Cambridge,
#; MA 02139, USA.
#;
#; Correspondence concerning AIPS should be addressed as follows:
#; Internet email: aipsmail at nrao.edu.
#; Postal address: AIPS Project Office
#; National Radio Astronomy Observatory
#; 520 Edgemont Road
#; Charlottesville, VA 22903-2475 USA
#-----------------------------------------------------------------------
# Usage: . AIPSASSN.SH
#-----------------------------------------------------------------------
# AIPSASSN defines environment variables required to run AIPS. It
# relies on assignments made by AIPSPATH.SH, particularly $AIPS_ROOT.
# Normally AIPSASSN.SH is called by LOGIN.SH or other AIPS scripts.
#
# The TAPEn definitions are now in $NET0/TPDEVS.LIST, not here.
# Explanation of some of these variables:
#
# NET0 Location of network system parameter file NETSP.
# Used by ZDCHIN for disk information.
#
# DATA_ROOT Root directory of all AIPS data directories
# DA00 Host-specific directory containing AIPS system files.
#
# LPDEV Printer to use (see $AIPS_ROOT/PRDEVS.SH for LP* vars)
# LPDEVn List of printer names xx as in "lpr -Pxx"
# LPTYPEn Corresponding printer type: PS, QMS, TEXT, or PREVIEW.
# LPDESCn Human-readable description of printer (location, etc).
#
# RUNFIL Area for "run" files (text). If RUNFIL is already
# defined, it will NOT be overridden.
#
# RESSTTn Terminals reserved for AIPSn (if any). Used by ZSTRTA
#
# TVTTn hardware TV for AIPS number n, reserved terminal n.
# Restricts access to AIPS n only. See TVDEVS.SH also.
#
# TASKTTn AIPSn task message terminal (if any). Usually
# associated with reserved terminals. Used by ZTTOPN.
# This is NOT the MSGSRV (Message Server) definition!
#
# TEKTKn AIPSn Tektronix 4010/4012 compatible terminal (if any)
# This is NOT the TEKSRV (Tektronix Server) definition!
#
# BATCH_OUT Batch AIPS error file/terminal.
#
# LPRNTR Line printer spool directory. Used by ZLPOPN.
#
# PLOTTER Plotter spool directory. Used by ZLASIO and ZLWIO.
#
#-----------------------------------------------------------------------
# Misc non-version directories
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# Ionospheric data.
AIPSIONS=$AIPS_ROOT/TEXT/IONS; export AIPSIONS
# Public documents
AIPSPUBL=$AIPS_ROOT/TEXT/PUBL; export AIPSPUBL
# Gripes. Not for distribution.
AIPSGRIP=$AIPS_ROOT/TEXT/GRIP; export AIPSGRIP
# AIPS user lists. Ditto.
AIPSWHO=$AIPS_ROOT/TEXT/WHO; export AIPSWHO
# AIPS Star file area
AIPSTARS=$AIPS_ROOT/TEXT/STARS; export AIPSTARS
# AIPS FITS (not user) area.
AIPSFITS=$AIPS_ROOT/BIN/FITS; export AIPSFITS
# Area for fig, etc. files
AIPSFIG=$AIPS_ROOT/TEXT/PUBL/FIG; export AIPSFIG
# HTML files
AIPSHTML=$AIPS_ROOT/TEXT/HTML; export AIPSHTML
# System OFM files.
AIPSOFM=$AIPS_ROOT/TEXT/OFM; export AIPSOFM
# User OFM file area.
OFMFIL=$AIPS_ROOT/OFM; export OFMFIL
# User RUN file area (no override)
if [ "$RUNFIL" = "" ] ; then
RUNFIL=$AIPS_ROOT/RUN
export RUNFIL
fi
# PRINT spooling area.
PRTFIL=$AIPS_ROOT/PRINT; export PRTFIL
# PLOT spooling directory.
PLTFIL=$AIPS_ROOT/PLOT; export PLTFIL
#
# System and data areas
# ~~~~~~~~~~~~~~~~~~~~~
NET0=$AIPS_ROOT/DA00; export NET0
# Data root area, normally /DATA
DATA_ROOT=$AIPS_ROOT/DATA; export DATA_ROOT
DA00=$AIPS_ROOT/DA00/$HOST; export DA00
# These definitions don't get used
# if DADEVS.SH is called (as it is
# from START_AIPS and RUN) unless
# you use "da=default". To make
# this option work, set these to
# some sensible defaults.
# DA01=$DATA_ROOT/${HOST}_1; export DA01
# DA02=$DATA_ROOT/${HOST}_2; export DA02
# DA03=$DATA_ROOT/${HOST}_3; export DA03
# DA04=$DATA_ROOT/${HOST}_4; export DA04
# FITS disk area.
FITS=$AIPS_ROOT/FITS; export FITS
# Version specific directories
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# Memory areas.
OLDMEM=$OLD/$ARCH/MEMORY; export OLDMEM
NEWMEM=$NEW/$ARCH/MEMORY; export NEWMEM
TSTMEM=$TST/$ARCH/MEMORY; export TSTMEM
CVXMEM=$CVX/$ARCH/MEMORY; export CVXMEM
# Load areas.
LOAD=$AIPS_VERSION/$ARCH/LOAD; export LOAD
TVLOAD=$LOAD; export TVLOAD
# LIBRDBG area, for DEBUG version
LIBRDBG=$AIPS_VERSION/$ARCH/LIBRDBG; export LIBRDBG
# Pseudo AP areas.
OLDPSAP=$OLD/$ARCH/LOAD/ALT1; export OLDPSAP
NEWPSAP=$NEW/$ARCH/LOAD/ALT1; export NEWPSAP
TSTPSAP=$TST/$ARCH/LOAD/ALT1; export TSTPSAP
CVXPSAP=$CVX/$ARCH/LOAD/ALT1; export CVXPSAP
# Errors area.
ERRORS=$AIPS_VERSION/$ARCH/ERRORS/$HOST; export ERRORS
# System run files.
RUNSYS=$AIPS_VERSION/RUN; export RUNSYS
#
# Device assignments
# ~~~~~~~~~~~~~~~~~~
# (Tapes done in TPDEVS.SH/LIST)
# Set terminal for ZSTRTA.
TASKTT0="`tty 2>/dev/null`"; export TASKTT0
# Printer and plotter definitions.
BATCH_OUT=/dev/console; export BATCH_OUT
LPRNTR=/tmp; export LPRNTR
PLOTTER=/tmp; export PLOTTER
# Number of printers. Modified by
# PRDEVS.SH (called by START_AIPS)
LPDEVS=1; export LPDEVS
# Host specific definitions
# ~~~~~~~~~~~~~~~~~~~~~~~~~
# LWPRINTER?, TASKTTn, RESSTTn,
# TEKTKn, TAAC1, and modification
# of any of the foregoing.
if [ "$SITE" = "NRAOCV" ] ; then
# NRAO Charlottesville. These
# definitions are shown here only
# for illustrative purposes. You
# should delete this section and
# insert definitions appropriate
# for your site.
# --------------------------------
# This is _the_ standard site
#
# Architecture-specific details
# For AIX 3.2.5, the following
# changes the behaviour of any
# malloc() calls by ANY
# application. If this interferes
# with other non-AIPS applications
# in an undesirable way, remove
# this definition and place it in
# the $SYSUNIX/AIPSEXEC file.
# See /usr/lpp/bos/README.PSALLOC.
if [ "$ARCH" = IBM ] ; then
PSALLOC="early"; export PSALLOC
fi
# Problem w/SHM on our IBM's...
if [ "$ARCH" = IBM ] ; then
if [ "$DISPLAY" != "" ] ; then
displayhost=`echo $DISPLAY | awk -F: '{print $1}'`
case $displayhost in
""|unix|`hostname`)
echo "No X11 MIT shared memory (problem with IBM X servers)"
echo 'AIPStv*useSharedMemory: 0' | xrdb -merge
;;
esac
fi
fi
#
#
elif [ "$SITE" = NRAOAOC -o "$SITE" = COAOARN ] ; then
# NRAO Array Ops Ctr, Socorro, NM.
# Turn off MSGSRV unless it's set
# already. Site Preference.
if [ "$AIPS_MSG_EMULATOR" = "" ] ; then
AIPS_MSG_EMULATOR=xterm; export AIPS_MSG_EMULATOR
fi
if [ "$DATA_ROOT" = "/DEFINE_ME" ] ; then
DATA_ROOT=/DATA; export DATA_ROOT
fi
# Solitaire queue logical
SOL35=/var/spool/solitaire/35mm4k; export SOL35
# ONLINE logical for AOC
ONLINE=$AIPS_ROOT/online/$ARCH; export ONLINE
# Different place for FITS at AOC.
if [ -d $DATA_ROOT/${HOST}_1 ] ; then
if [ ! -d $DATA_ROOT/${HOST}_1/FITS ] ; then
if mkdir $DATA_ROOT/${HOST}_1/FITS ; then
FITS=$DATA_ROOT/${HOST}_1/FITS; export FITS
else
echo "AIPSASSN: Tried to create $DATA_ROOT/${HOST}_1/FITS area, failed."
echo "AIPSASSN: Using $DATA_ROOT/${HOST}_1 itself instead."
FITS=$DATA_ROOT/${HOST}_1; export FITS
fi
else
FITS=$DATA_ROOT/${HOST}_1/FITS; export FITS
fi
fi
#
elif [ "$SITE" = NRAOVLA ] ; then
# NRAO Array Ops Ctr, Socorro, NM.
# Turn off MSGSRV unless it's set
# already. Site Preference.
if [ "$AIPS_MSG_EMULATOR" = "" ] ; then
AIPS_MSG_EMULATOR=xterm; export AIPS_MSG_EMULATOR
fi
if [ "$DATA_ROOT" = "/DEFINE_ME" ] ; then
DATA_ROOT=/DATA; export DATA_ROOT
fi
# OPERATIONS area.
OPER=/home/banshee/operations/tapelog; export OPER
# ONLINE definition for VLA
ONLINE=$AIPS_ROOT/online/${ARCH}; export ONLINE
# FITS definition
# Different place for FITS at AOC.
if [ -d $DATA_ROOT/${HOST}_1 ] ; then
if [ ! -d $DATA_ROOT/${HOST}_1/FITS ] ; then
if mkdir $DATA_ROOT/${HOST}_1/FITS ; then
FITS=$DATA_ROOT/${HOST}_1/FITS; export FITS
else
echo "AIPSASSN: Tried to create $DATA_ROOT/${HOST}_1/FITS area, failed."
echo "AIPSASSN: Using $DATA_ROOT/${HOST}_1 itself instead."
FITS=$DATA_ROOT/${HOST}_1; export FITS
fi
else
FITS=$DATA_ROOT/${HOST}_1/FITS; export FITS
fi
fi
# Host-specific things. This
# particular one is left in as an
# example of how to have alternate
# load areas and hardwired AIPS1,
# AIPS2, etc. and graphics
# terminals.
if [ "$HOST" = YUCCA ] ; then
# Note LOAD4 area for CVEX only....
LOAD4=$AIPS_VERSION/$ARCH/LOAD/ALT4; export LOAD4
# Reserved terminals etc. AIPS1:
# terminal on tty0c, iis tv, tek
# graphics terminal on tty0e
RESSTT1=/dev/tty0c; export RESSTT1
TVTT1=yucca+iis; export TVTT1
TEKTK01=/dev/tty0e; export TEKTK01
# AIPS2: terminal on tty0d, ivas
# tv, tek same as AIPS1.
RESSTT2=/dev/tty0d; export RESSTT2
TVTT2=yucca+iis; export TVTT2
TEKTK02=/dev/tty0e; export TEKTK02
# define obsolete TVDEV1 def'n for
# dicomed software.
TVDEV1=/dev/iis; export TVDEV1
#
fi
#
fi
# End of AIPSASSN.SH
-------------- next part --------------
#-----------------------------------------------------------------------
#; Copyright (C) 1996, 2000-2002
#; Associated Universities, Inc. Washington DC, USA.
#;
#; This program is free software; you can redistribute it and/or
#; modify it under the terms of the GNU General Public License as
#; published by the Free Software Foundation; either version 2 of
#; the License, or (at your option) any later version.
#;
#; This program is distributed in the hope that it will be useful,
#; but WITHOUT ANY WARRANTY; without even the implied warranty of
#; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#; GNU General Public License for more details.
#;
#; You should have received a copy of the GNU General Public
#; License along with this program; if not, write to the Free
#; Software Foundation, Inc., 675 Massachusetts Ave, Cambridge,
#; MA 02139, USA.
#;
#; Correspondence concerning AIPS should be addressed as follows:
#; Internet email: aipsmail at nrao.edu.
#; Postal address: AIPS Project Office
#; National Radio Astronomy Observatory
#; 520 Edgemont Road
#; Charlottesville, VA 22903-2475 USA
#-----------------------------------------------------------------------
# Usage: source AIPSASSN.CSH
#-----------------------------------------------------------------------
# AIPSASSN defines environment variables required to run AIPS. It
# relies on assignments made by AIPSPATH.CSH, particularly $AIPS_ROOT.
# Normally AIPSASSN.CSH is called by LOGIN.CSH or other AIPS scripts.
#
# The TAPEn definitions are now in $NET0/TPDEVS.LIST, not here.
# Explanation of some of these variables:
#
# NET0 Location of network system parameter file NETSP.
# Used by ZDCHIN for disk information.
#
# DATA_ROOT Root directory of all AIPS data directories
# DA00 Host-specific directory containing AIPS system files.
#
# LPDEV Printer to use (see $AIPS_ROOT/PRDEVS.SH for LP* vars)
# LPDEVn List of printer names xx as in "lpr -Pxx"
# LPTYPEn Corresponding printer type: PS, QMS, TEXT, or PREVIEW.
# LPDESCn Human-readable description of printer (location, etc).
#
# RUNFIL Area for "run" files (text). If RUNFIL is already
# defined, it will NOT be overridden.
#
# RESSTTn Terminals reserved for AIPSn (if any). Used by ZSTRTA
#
# TVTTn hardware TV for AIPS number n, reserved terminal n.
# Restricts access to AIPS n only. See TVDEVS.SH also.
#
# TASKTTn AIPSn task message terminal (if any). Usually
# associated with reserved terminals. Used by ZTTOPN.
# This is NOT the MSGSRV (Message Server) definition!
#
# TEKTKn AIPSn Tektronix 4010/4012 compatible terminal (if any)
# This is NOT the TEKSRV (Tektronix Server) definition!
#
# BATCH_OUT Batch AIPS error file/terminal.
#
# LPRNTR Line printer spool directory. Used by ZLPOPN.
#
# PLOTTER Plotter spool directory. Used by ZLASIO and ZLWIO.
#
#-----------------------------------------------------------------------
# Non-version specific directories
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# Ionospheric data.
setenv AIPSIONS $AIPS_ROOT/TEXT/IONS
# Public documents.
setenv AIPSPUBL $AIPS_ROOT/TEXT/PUBL
# Gripes. Not for distribution.
setenv AIPSGRIP $AIPS_ROOT/TEXT/GRIP
# AIPS user lists. Ditto.
setenv AIPSWHO $AIPS_ROOT/TEXT/WHO
# AIPS Star file area
setenv AIPSTARS $AIPS_ROOT/TEXT/STARS
# AIPS FITS (not user) area.
setenv AIPSFITS $AIPS_ROOT/BIN/FITS
# Area for fig, etc. files
setenv AIPSFIG $AIPS_ROOT/TEXT/PUBL/FIG
# HTML files
setenv AIPSHTML $AIPS_ROOT/TEXT/HTML
# System OFM files.
setenv AIPSOFM $AIPS_ROOT/TEXT/OFM
# User OFM file area.
setenv OFMFIL $AIPS_ROOT/OFM
# Default user RUN file area.
if ($?RUNFIL == 0) then
setenv RUNFIL $AIPS_ROOT/RUN
endif
# PRINT spooling area.
setenv PRTFIL $AIPS_ROOT/PRINT
# PLOT spooling directory.
setenv PLTFIL $AIPS_ROOT/PLOT
#
# System and data areas
# ~~~~~~~~~~~~~~~~~~~~~
setenv NET0 $AIPS_ROOT/DA00
# Data root area, normally /DATA
setenv DATA_ROOT $AIPS_ROOT/DATA
setenv DA00 $AIPS_ROOT/DA00/$HOST
# These definitions don't get used
# if DADEVS.SH is called (as it is
# from START_AIPS and RUN) unless
# you use "da=default". To make
# this option work, set these to
# some sensible defaults.
# setenv DA01 $DATA_ROOT/${HOST}_1
# setenv DA02 $DATA_ROOT/${HOST}_2
# setenv DA03 $DATA_ROOT/${HOST}_3
# setenv DA04 $DATA_ROOT/${HOST}_4
# FITS disk area.
setenv FITS $AIPS_ROOT/FITS
# Version specific directories
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# Memory areas.
setenv OLDMEM $OLD/$ARCH/MEMORY
setenv NEWMEM $NEW/$ARCH/MEMORY
setenv TSTMEM $TST/$ARCH/MEMORY
setenv CVXMEM $CVX/$ARCH/MEMORY
# Load areas.
setenv LOAD $AIPS_VERSION/$ARCH/LOAD
setenv TVLOAD $LOAD
# LIBRDBG area, for DEBUG version
setenv LIBRDBG $AIPS_VERSION/$ARCH/LIBRDBG
# Pseudo AP areas.
setenv OLDPSAP $OLD/$ARCH/LOAD/ALT1
setenv NEWPSAP $NEW/$ARCH/LOAD/ALT1
setenv TSTPSAP $TST/$ARCH/LOAD/ALT1
setenv CVXPSAP $CVX/$ARCH/LOAD/ALT1
# Errors area.
setenv ERRORS $AIPS_VERSION/$ARCH/ERRORS/$HOST
# System run files.
setenv RUNSYS $AIPS_VERSION/RUN
#
# Device assignments
# ~~~~~~~~~~~~~~~~~~
# (Tapes done in TPDEVS.SH/LIST)
# Set terminal for ZSTRTA.
setenv TASKTT0 "`tty >&/dev/null`"
# Printer and plotter definitions.
setenv BATCH_OUT /dev/console
setenv LPRNTR /tmp
setenv PLOTTER /tmp
# Number of printers. Modified by
# PRDEVS.SH (called by START_AIPS)
setenv LPDEVS 1
# Host specific definitions
# ~~~~~~~~~~~~~~~~~~~~~~~~~
# LWPRINTER?, TASKTTn, RESSTTn,
# TEKTKn, TAAC1, and modification
# of any of the foregoing.
if ("$SITE" == NRAOCV) then
# NRAO Charlottesville. These
# definitions are shown here only
# for illustrative purposes. You
# should delete this section and
# insert definitions appropriate
# for your site.
# --------------------------------
# This is _the_ standard site
#
# Architecture-specific details
# For AIX 3.2.5, the following
# changes the behaviour of any
# malloc() calls by ANY
# application. If this interferes
# with other non-AIPS applications
# in an undesirable way, remove
# this definition and place the
# bourne shell equivalent (see
# AIPSASSN.SH) in the
# $SYSUNIX/AIPSEXEC file.
# See /usr/lpp/bos/README.PSALLOC.
if ( "$ARCH" == "IBM" ) then
setenv PSALLOC early
endif
# Problem w/SHM on our IBM's...
if ("$ARCH" == "IBM") then
if ( $?DISPLAY ) then
set displayhost = `echo $DISPLAY | awk -F: '{print $1}'`
if ( "$DISPLAY" != "" ) then
if ( "$displayhost" == "" || \
"$displayhost" == "`hostname`" || \
"$displayhost" == "unix" ) then
echo "No X11 MIT shared memory (problem with IBM X servers)"
echo 'AIPStv*useSharedMemory: 0' | xrdb -merge
endif
endif
endif
endif
#
else if ("$SITE" == NRAOAOC || "$SITE" == COAOARN) then
# NRAO Array Ops Ctr, Socorro, NM.
# Turn on MSGSRV unless it's set
# already. Site Preference.
if ( ! $?AIPS_MSG_EMULATOR ) then
setenv AIPS_MSG_EMULATOR xterm
endif
if ("$DATA_ROOT" == "/DEFINE_ME") then
setenv DATA_ROOT /DATA
endif
# Solitaire queue logical
setenv SOL35 /var/spool/solitaire/35mm4k
# ONLINE logical for AOC
setenv ONLINE $AIPS_ROOT/online/$ARCH
# Different place for FITS at AOC.
if ( -d $DATA_ROOT/${HOST}_1 ) then
if ( ! -d $DATA_ROOT/${HOST}_1/FITS ) then
if ( mkdir $DATA_ROOT/${HOST}_1/FITS ) then
setenv FITS $DATA_ROOT/${HOST}_1/FITS
else
echo "AIPSASSN: Tried to create $DATA_ROOT/${HOST}_1/FITS area, failed."
echo "AIPSASSN: Using $DATA_ROOT/${HOST}_1 itself instead."
setenv FITS $DATA_ROOT/${HOST}_1
endif
else
setenv FITS $DATA_ROOT/${HOST}_1/FITS
endif
endif
#
else if ("$SITE" == NRAOVLA) then
# NRAO VLA site.
# Turn off MSGSRV unless it's set
# already. Site Preference.
if ( ! $?AIPS_MSG_EMULATOR ) then
setenv AIPS_MSG_EMULATOR xterm
endif
if ("$DATA_ROOT" == "/DEFINE_ME") then
setenv DATA_ROOT /DATA
endif
# OPERATIONS area.
setenv OPER /home/banshee/operations/tapelog
# ONLINE logical for VLA
setenv ONLINE $AIPS_ROOT/online/$ARCH
# FITS disk area.
# Different place for FITS at AOC.
if ( -d $DATA_ROOT/${HOST}_1 ) then
if ( ! -d $DATA_ROOT/${HOST}_1/FITS ) then
if ( mkdir $DATA_ROOT/${HOST}_1/FITS ) then
setenv FITS $DATA_ROOT/${HOST}_1/FITS
else
echo "AIPSASSN: Tried to create $DATA_ROOT/${HOST}_1/FITS area, failed."
echo "AIPSASSN: Using $DATA_ROOT/${HOST}_1 itself instead."
setenv FITS $DATA_ROOT/${HOST}_1
endif
else
setenv FITS $DATA_ROOT/${HOST}_1/FITS
endif
endif
# Host-specific things. This
# particular one is left in as an
# example of how to have alternate
# load areas and hardwired AIPS1,
# AIPS2, etc. and graphics
# terminals.
if ("$HOST" == YUCCA) then
# Note LOAD4 area; for CVEX only
setenv LOAD4 $AIPS_VERSION/$ARCH/LOAD/ALT4
# Reserved terminals etc. AIPS1:
# terminal on tty0c, iis tv, tek
# graphics terminal on tty0e
setenv RESSTT1 /dev/tty0c
setenv TVTT1 yucca+iis
setenv TEKTK01 /dev/tty0e
# AIPS2: terminal on tty0d, ivas
# tv, tek same as AIPS1.
setenv RESSTT2 /dev/tty0d
setenv TVTT2 yucca+iis
setenv TEKTK02 /dev/tty0e
# define obsolete TVDEV1 def'n for
# dicomed software.
setenv TVDEV1 /dev/iis
#
endif
#
endif
# End of AIPSASSN.CSH
More information about the Daip
mailing list