[daip] I/O Error
bmoorthy at nmsu.edu
bmoorthy at nmsu.edu
Mon Sep 24 21:04:37 EDT 2001
Hello,
I got the following error message while trying to read data from tape.
FITLD1: Task FITLD (release of 31DEC01) begins
FITLD1: Reading tape drive number 1
FITLD1: Reading tape at current position
AIPS 1: Resumes
>FITLD1: Found MULTI observed on 02-JUN-1999
FITLD1: UV data will be written in compressed format
FITLD1: CATDIR: I/O ERROR READING CATALOG FILES: 1255
FITLD1: UVCREA: CATDIR IO ERROR= 3
FITLD1: ERROR 4 RETURNED FROM UVFHDR
FITLD1: Purports to die of UNNATURAL causes
FITLD1: maritimus 31DEC01 TST: Cpu= 0.0 Real= 13
If it helps the parameters of FITLD are:
AIPS 1: FITLD: Task to store an image or UV data from a FITS tape
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: INTAPE 1 Input tape drive # (0 => 1)
AIPS 1: NFILES 0 # of files to advance on tape
AIPS 1: INFILE *all ' ' Disk file name (FITS only)
AIPS 1: OUTNAME ' ' File name (name)
AIPS 1: OUTCLASS ' ' File name (class)
AIPS 1: OUTSEQ 0 File name (seq. #)
AIPS 1: 0 => highest unique number
AIPS 1: => matching (on VLBA)
AIPS 1: -1 => FITS tape value
AIPS 1: OUTDISK 2 Disk drive # (0 => any)
AIPS 1: OPTYPE ' ' Type of data to load,
AIPS 1: ' ' => all types
AIPS 1: 'UV' => UV data
AIPS 1: 'IM' => images
AIPS 1: NCOUNT 1 Number of files to load.
AIPS 1: DOTABLE 1 True (1.0) means load tables
AIPS 1: for images.
AIPS 1: DOUVCOMP 1 >0 => compressed data (FITS)
AIPS 1: DOCONCAT 1 >0 -> if VLBA or uv table,
AIPS 1: append data to existing
AIPS 1: files, or if no appropriate
AIPS 1: files exist create a new file
AIPS 1: and append all data to that
AIPS 1: file.
AIPS 1: *****************************
AIPS 1: CLINT 0 CL entry interval (min)
AIPS 1: 0 => 1 minute.
AIPS 1: SOURCES *all ' ' Source list to accept.
AIPS 1: QUAL -1 Source qualifier -1=>all
AIPS 1: TIMERANG *all 0 Timerange selected
AIPS 1: BCHAN 1 Lowest spectral channel
AIPS 1: number to select in each IF.
AIPS 1: 0=>1
AIPS 1: ECHAN 0 Highest spectral channel
AIPS 1: number to select in each IF.
AIPS 1: 0=>highest
AIPS 1: BIF 0 Lowest IF number 0=>1
AIPS 1: EIF 0 Highest IF number 0=>all
AIPS 1: DIGICOR 1 Controls the application of
AIPS 1: the VLBA correlator's digital
AIPS 1: correction.
AIPS 1: 0 or 1 => perform corrections
AIPS 1: 2 => perform cross-power
AIPS 1: corrections, do total-power
AIPS 1: only if zero padding used.
AIPS 1: -1 => do NOT perform
AIPS 1: corrections.
AIPS 1: SEE HELP for more details
AIPS 1: DELCORR 1 If >= 0 enable the second
AIPS 1: order correlator delay
AIPS 1: corrections to be applied
AIPS 1: during processing.
AIPS 1: SEE HELP for more details.
AIPS 1: SELBAND 0 Bandwidth to select (kHz)
AIPS 1: SELFREQ 0 Frequency to select (MHz).
AIPS 1: See HELP.
AIPS 1: FQTOL -1 Frequency tolerance assigned
AIPS 1: to SELFREQ, FITLD will select
AIPS 1: data with freq. of SELFREQ
AIPS 1: +/- FQTOL.
AIPS 1: The unit of FQTOL is kHz.
AIPS 1: <=0 => 10 kHz
AIPS 1: WTTHRESH 0 Flagging threshold based on
AIPS 1: weights. See HELP.
AIPS 1: 0 => no flagging
AIPS 1: 1 => will flag ALL data
AIPS 1: OPCODE ' ' Specify if wish to keep VT
AIPS 1: (VLBA Tape Statistics) table.
AIPS 1: ' ' => do not copy VT table
AIPS 1: 'VT' => keep VT table
AIPS 1: NPIECE 0 Maximum uv table piece to
AIPS 1: load (ignored for tape unless
AIPS 1: NCOUNT = 1)
Thanks for your help,
Bhasker
More information about the Daip
mailing list