[daip] bug in APCAL?
Amy Mioduszewski
amiodusz at aoc.nrao.edu
Thu Aug 9 16:59:48 EDT 2001
I am trying to run APCAL on some data that I have
UVCOPied from another dataset. I have UVCOPied one
source and 8 of the 12 antennas. When I run APCAL
on this UVCOPied data I get these messages, which
are O.K. because I copied source 1.
PCAL1: Task APCAL (release of 31DEC01) begins
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 2
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 2
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 2
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 2
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 2
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 2
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 3
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 3
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 3
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 3
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 3
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 3
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 3
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 3
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 3
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 3
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 2
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 2
APCAL1: GETSOU: COULD NOT FIND DATA FOR SOURCE NO. 2
APCAL1: Appears to have ended successfully
But when I look at the SN table APCAL produces it only has
data for antenna 1. Antenna 2 was not copied. I looked at
the TY and GC tables and they have all the right antennas in
them.
Here are my inputs:
AIPS 1: APCAL Task to generate an amplitude calibration SN table
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: INNAME 'KRVSFR3 ' Input UV file name (name)
AIPS 1: INCLASS 'UVCOP ' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 2 Input UV file disk unit #
AIPS 1:
AIPS 1: ANTENNAS *all 0 Antennas to calibrate
AIPS 1: SUBARRAY 0 Subarray 0=> 1
AIPS 1: STOKES ' ' Stokes type ('R','L',' ')
AIPS 1: BIF 0 Start IF number
AIPS 1: EIF 0 End IF number
AIPS 1: FREQID -1 Freq. ID to calibrate
AIPS 1: SOURCES *all ' ' Sources to calibrate
AIPS 1: TIMERANG *all 0 Time range to calibrate
AIPS 1:
AIPS 1: TYVER 1 TY table version number.
AIPS 1: GCVER 1 GC table version number.
AIPS 1: SNVER 2 Output SN table version.
AIPS 1: 0 => highest unique
AIPS 1: OPCODE ' ' Calibration opcode:
AIPS 1: ' ' => no opacity corr.
AIPS 1: 'GRID','OPAC' => opacity
AIPS 1: APARM *all 0 Calibration parameters:
AIPS 1: (1) => B factor (def. 1.0)
AIPS 1: Opacity parameters:
AIPS 1: (2) => ZA limit (deg)
AIPS 1: (3) 1 => use spillover
AIPS 1: correction
AIPS 1: (4) 1 => use all FQ in
AIPS 1: opac. soln.
AIPS 1: (5) Limit to sec(z) plotted
AIPS 1: SOLINT 0 Solution interval (min)
AIPS 1: 0 => use all data
AIPS 1: INFILE *all ' ' Text file with weather info.
AIPS 1: TREC *all 0 Receiver temperatures (K);
AIPS 1: in (R,L) pairs.
AIPS 1: TAU0 *all 0 Zenith opacities (per ant.)
AIPS 1: DOFIT *all 0 Fit type (per ant.)
AIPS 1: 0 => apply Trec only
AIPS 1: apply
AIPS 1: PRTLEV 0 Print level
AIPS 1: DOTV -1 TV selection (<0 => PL file)
AIPS 1: LTYPE 0 Plot labelling
Also, I decided to run APCAL on the original dataset and it worked
fine.
Amy
More information about the Daip
mailing list