[evla-sw-discuss] [Fwd: C118155]

[Bryan Butler]

the 4/28/06 one is the same known software error barry just responded to for 
item C118155 - there is a known problem with the frequency setup for P-band.

we should not allow any P-band scripts to be run until that problem is fixed. 
and we should close both C118134 and C118155.

i don't know about the one on 2/10.  rich, any idea?

	-bryan


On 5/4/06 08:07, Pat Van Buskirk wrote:
> Below is a new form from last night. We also have two additional open 
> forms for the online system:
> 
> 4/28/06 - Failure - executor failed to run script 537e153_00x.evla, 
> halts with numerous java and python errors, ends with message 
> 'RefpointingAgent receive or Unmarshal Error', this being the 
> significant error, according to Bryan Butler. Contacted Rich Moeser, 
> Bryan Butler, actions taken included restarting executor, to no avail; 
> Barry Clark was not available by phone at the time.
> 
> 2/10/06 - antenna 9 - some LO-IFchecker errors not showing up on the 
> operator's checker console. Antenna 11, checker message Antenna T1 not 
> locked please reset ds 3/8/06. 3/30/06 - Peggy/Ken issue.
> 
> If anyone has any updates to these open forms, please send them to 
> Phillip Hicks.
> 
> Thanks,
> Pat
> 
> 
> 
> 
> -------- Original Message --------
> Subject: C118155
> Date: Thu, 4 May 2006 07:35:33 -0600
> From: Phillip D. Hicks <phicks at nrao.edu>
> Organization: NRAO
> To: <ms-evla-online-soft at aoc.nrao.edu>
> 
>    Work Order        :  C118155
> 
>  * WO Status        :  OPD
>    Asset Number        :
>    Asset Short Desc    :
>    Asset Location        :  VLA-CB-ROOM C224
>    Originator        :  Briscoe, Tom
>  * Asset Status        :
>    Safety            :  N
>    Plan Priority        :  3
>    Origination Date    :  5/3/2006
>    Due Date            :  5/3/2006
>    Fault Code        :  FAILURE
> 
>    Work Requested        :  Failure: I attempted to load/convert
> obs file /home/banshee/observe/obsArchive/578s601b.OBS (P-band) using
> antenna 14.  The file loaded and started.  The first pointing command
> was sent to the antenna, then the file quit with a status of "Normal
> Completion".  I used obs2script to convert the file to 578S601B.evla.
> The output looked okay so I submittted it and it did the same thing.
> 
>    Employee ID        :  =>EVLA O/L
>  * Completed (Y/N)    :
>  * Date (MM/DD/YYYY)    :
>  * Time worked        :
>  * Corrective Action    :
> 
>  * Values required when email is returned.
> 
> 
>