[daip] Ask for help to install the AIPS on the newest MacBook Pro
cuiyuzhu
cyz3640 at 126.com
Fri May 12 01:25:03 EDT 2017
Dear Eric,
Thank you very much for your suggestions. I am also sorry for my stupid question. I didn’t realize that until you pointed it out. I do get the finally succeeded message.
AipsWiz: That's it. You should now have the latest AIPS! Enjoy.
But when I run the aips, I got these messages:
Bamboo:aips cuiyuzhu$ . ./LOGIN.SH
Bamboo:aips cuiyuzhu$ aips notv tpok
START_AIPS: Your initial AIPS printer is the MIZUSAWA
START_AIPS: - system name KONICA_MINOLTA_bizhub_C554e_2F, AIPS type PS
START_AIPS: User data area assignments:
DADEVS.PL: This program is untested under Perl version 5.018
(Using global default file /opt/aips/DA00/DADEVS.LIST for DADEVS.PL)
Disk 1 (1) is /opt/aips/DATA/LOCALHOST_1
Tape assignments:
Tape 1 is REMOTE
Tape 2 is REMOTE
START_AIPS: Assuming TPMON daemons are running or not used (you said TPOK)
Starting up 31DEC17 AIPS with normal priority
dyld: Library not loaded: @rpath/libsvml.dylib
Referenced from: /opt/aips/31DEC17/MACINT/LOAD/ZSTRTA.EXE
Reason: image not found
Abort trap: 6
Bamboo:aips cuiyuzhu$ aips tv=local
START_AIPS: Will use or start first available Unix Socket based TV
START_AIPS: Your initial AIPS printer is the MIZUSAWA
START_AIPS: - system name KONICA_MINOLTA_bizhub_C554e_2F, AIPS type PS
START_AIPS: User data area assignments:
DADEVS.PL: This program is untested under Perl version 5.018
(Using global default file /opt/aips/DA00/DADEVS.LIST for DADEVS.PL)
Disk 1 (1) is /opt/aips/DATA/LOCALHOST_1
Tape assignments:
Tape 1 is REMOTE
Tape 2 is REMOTE
START_AIPS: Starting TV servers on localhost asynchronously
START_AIPS: - WITH Unix Sockets as requested...
START_AIPS: Starting TPMON daemons on LOCALHOST asynchronously...
Starting up 31DEC17 AIPS with normal priority
dyld: Library not loaded: @rpath/libsvml.dylib
Referenced from: /opt/aips/31DEC17/MACINT/LOAD/ZSTRTA.EXE
Reason: image not found
Abort trap: 6
Bamboo:aips cuiyuzhu$ DADEVS.PL: This program is untested under Perl version 5.018
UNIXSERVERS: Start TV LOCK daemon TVSRV1 on localhost
dyld: Library not loaded: @rpath/libsvml.dylib
Referenced from: /opt/aips/31DEC17/MACINT/LOAD/./TVSRV1
Reason: image not found
UNIXSERVERS: Start XAS1 on localhost, DISPLAY /private/tmp/com.apple.launchd.jCLixH9H6L/org.macosforge.xquartz:0
UNIXSERVERS: Start graphics server TKSRV1 on localhost, display /private/tmp/com.apple.launchd.jCLixH9H6L/org.macosforge.xquartz:0
UNIXSERVERS: Start message server MSSRV1 on localhost, display /private/tmp/com.apple.launchd.jCLixH9H6L/org.macosforge.xquartz:0
STARTPMON: [LOCALHOST] Old TPMON1 link found in /opt/aips/31DEC17/MACINT/LOAD
STARTPMON: [LOCALHOST] - will TRY to replace & restart it here.
STARTPMON: [LOCALHOST] - TPMON daemons on other MACINT hosts may need restarted.
STARTPMON: [LOCALHOST] Starting TPMON1 with output SUPPRESSED
dyld: Library not loaded: @rpath/libsvml.dylib
Referenced from: /opt/aips/31DEC17/MACINT/LOAD/./TPMON1
Reason: image not found
XAS: ** TrueColor FOUND!!!
XAS: *** Using shared memory option for speed ***
XAS: Using screen width 1430 height 778,
max grey level 8191 in 16 grey-scale memories
Shared memory id failure: Invalid argument
Warning: locale not supported by Xlib, locale set to C
Warning: locale not supported by Xlib, locale set to C
I can not fully understand what is wrong.
Thank you very much!
Best regards,
Yuzhu
> 在 2017年5月11日,23:53,Eric Greisen <egreisen at nrao.edu> 写道:
>
> On 05/11/2017 03:47 AM, cuiyuzhu wrote:
>> Dear AIPS professor,
>>
>> I will be a PhD student in NAOJ from this October. Recently, I wanted to
>> install the 31DEC17 version of AIPS on my MacBook Pro(macOS Sierra
>> 10.12.3). But I came across a few problems. Wish you could have time to
>> have a look at it.
>>
>> 1》First of all, I followed the steps on the
>> websitehttp://www.aips.nrao.edu/install.shtml, and set some parameters
>> as listed:
>>
>> AIPS_ROOT (screen 3): /opt/aips
>> Group (screen 4): everyone
>> Group Write (screen 4): YES
>> Architecture (screen 5): LNX64
>> Site name (screen 5): AIPSUSER
>> AIPS hosts (screen 6): LOCALHOST
>> Data areas (screen 7): /DATA/LOCALHOST_1
>> Printers (screen 8): pscolor ... NONE 2nd floor printer
>> Paper type (screen 8): A4
>> Tape drives (screen 9):
>> Tape hosts (screen 9): 127.0.0.1
>>
>>
>> 2》Then form the MNJ, I got these messages:
>> AipsWiz: About to run 'MAKE.BMNJ '...
>> AipsWiz: This will generate a fair bit of output.
>> AIPS_VERSION=/opt/aips/31DEC17
>> MAKE.BMNJ - Moving to /opt/aips/31DEC17/LNX64/UPDATE
>> MAKE.BMNJ - The binary MNJ now uses rsync for updates;
>> MAKE.BMNJ - but cvs (http://www.cvshome.org) may be useful;
>> MAKE.BMNJ - looking to see if I can find a copy of it....
>> MAKE.BMNJ - I cannot seem to find it, either it is not here or it is
>> MAKE.BMNJ - here, but it is installed in a place that is not in your
>> MAKE.BMNJ - search path. If it is not here, you should install it and
>> MAKE.BMNJ - run MAKE.BMNJ again. Otherwise, please tell me where you
>> MAKE.BMNJ - put it.
>> -n MAKE.BMNJ - Full path to cvs: :
>>
>> ./MAKE.BMNJ: line 65: [: too many arguments
>> MAKE.BMNJ - Setting up your MNJ settings in
>> MAKE.BMNJ - /opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/UPDCONFIG:
>> MAKE.BMNJ - --------------------------
>> # Created by MAKE.MNJ on Thu May 11 02:15:16 UTC 2017
>> cvscmd=
>> ClientName=localhost
>> MailList=cuiyuzhu
>> ErrorList=cuiyuzhu,aipsmgr at nrao.edu <mailto:aipsmgr at nrao.edu> <mailto:aipsmgr at nrao.edu <mailto:aipsmgr at nrao.edu>>
>> MAKE.BMNJ - --------------------------
>> MAKE.BMNJ - If you wish to change any of these settings, refer to the
>> MAKE.BMNJ - comments at the start of
>> /opt/aips/31DEC17/SYSTEM/UNIX/UPDATE/UPDCONFIG
>> MAKE.BMNJ - and edit /opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/UPDCONFIG
>> yourself.
>> -n MAKE.BMNJ - Press <RETURN> to acknowledge...:
>>
>> MAKE.BMNJ - cvs needs to be primed by a login operation; this
>> MAKE.BMNJ - is also a good time to test and make sure you can
>> MAKE.BMNJ - connect to our server. We will now try to login to
>> MAKE.BMNJ - the server (mnj.aoc.nrao.edu <http://mnj.aoc.nrao.edu/> <http://mnj.aoc.nrao.edu <http://mnj.aoc.nrao.edu/>>);
>> when prompted for
>> MAKE.BMNJ - a password, just hit the enter or return key.
>> ./MAKE.BMNJ: line 135: -d: command not found
>> MAKE.BMNJ - Created /Users/cuiyuzhu/do_daily.localhost
>> MAKE.BMNJ - Please inspect it to make sure it fits your needs.
>> -n MAKE.BMNJ - Press <RETURN> when ready to proceed...:
>>
>> MAKE.BMNJ - You might want to add a crontab entry, e.g.
>>
>> 30 1 * * 1-6 /Users/cuiyuzhu/do_daily.localhost
>>
>> MAKE.BMNJ - when you are ready to start the MNJ.
>> MAKE.BMNJ - Your configuration for the AIPS midnight job is complete.
>> AipsWiz: =========================================================
>> AipsWiz: MAKE.BMNJ seemed to work
>> (/opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/UPDCONFIG found)
>> AipsWiz: ==> Press <ENTER> to continue...:
>> AipsWiz: =====> Generate system files via FILAIP/POPSGN...
>> AipsWiz: This will generate some output, including a copyright (left)
>> AipsWiz: statement and some prompts, but should end with a 'Done!' if
>> AipsWiz: everything worked...
>>
>> AipsWiz: About to run FILAIP. If this is a re-installation, you
>> AipsWiz: will be prompted for an AIPS Manager password. The
>> AipsWiz: default password is AMANAGER
>>
>> Data disk assignments:
>> DADEVS.PL: This program is untested under Perl version 5.018
>> (Using global default file /opt/aips/DA00/DADEVS.LIST for DADEVS.PL)
>> Disk 1 (1) is /opt/aips/DATA/LOCALHOST_1
>>
>> Starting up FILAIP (RELEASE OF 31DEC17)
>> /opt/aips/31DEC17/SYSTEM/UNIX/RUN: line 157:
>> /opt/aips/31DEC17/LNX64/LOAD/FILAIP.EXE: cannot execute binary file
>> /opt/aips/31DEC17/SYSTEM/UNIX/RUN: line 157:
>> /opt/aips/31DEC17/LNX64/LOAD/FILAIP.EXE: Undefined error: 0
>> AipsWiz: Error: FILAIP did not work, or there's a missing file!
>> AipsWiz: Error: This may mean that FILAIP did not work (it should have
>> AipsWiz: Error: created it and many other files in that area).
>> AipsWiz: Error: You can try running it by hand after (a) dotting the
>> AipsWiz: Error: LOGIN.SH file or sourcing the LOGIN.CSH file; and
>> AipsWiz: Error: (b) Typing 'RUN FILAIP'. You will then be asked for
>> AipsWiz: Error: two parameters. Use
>> 8 2
>>
>> AipsWiz: Error: as the standard values.
>> AipsWiz: Error: You will also have to RUN POPSGN if that works;
>>
>> AipsWiz: Error: Feed it
>>
>> 0 POPSDAT TST
>>
>>
>> AipsWiz: Error: when it asks for Idebug, etc. and press RETURN when
>> AipsWiz: Error: you see the '>' prompt.
>>
>>
>>
>> AipsWiz: Install Wizard stopping. Current settings saved in ~/.AIPSRC
>> AipsWiz: Abandoning ship! Goodbye.
>>
>> 3》as the “Running FILAIP, POPSGN, SETPAR” said, I run the filaip by
>> myself. The errors showed:
>>
>>
>> bash-3.2# run FILAIP
>> Data disk assignments:
>> DADEVS.PL: This program is untested under Perl version 5.018
>> (Using global default file /opt/aips/DA00/DADEVS.LIST for DADEVS.PL)
>> Disk 1 (1) is /opt/aips/DATA/LOCALHOST_1
>>
>> Starting up FILAIP (RELEASE OF 31DEC17)
>> /opt/aips/31DEC17/SYSTEM/UNIX/run: line 157:
>> /opt/aips/31DEC17/LNX64/LOAD/FILAIP.EXE: cannot execute binary file
>> /opt/aips/31DEC17/SYSTEM/UNIX/run: line 157:
>> /opt/aips/31DEC17/LNX64/LOAD/FILAIP.EXE: Undefined error: 0
>>
>>
>> 4》so is the “POPSGN”
>>
>> bash-3.2# run POPSGN
>> Data disk assignments:
>> DADEVS.PL: This program is untested under Perl version 5.018
>> (Using global default file /opt/aips/DA00/DADEVS.LIST for DADEVS.PL)
>> Disk 1 (1) is /opt/aips/DATA/LOCALHOST_1
>>
>> Starting up POPSGN (RELEASE OF 31DEC17)
>> /opt/aips/31DEC17/SYSTEM/UNIX/run: line 157:
>> /opt/aips/31DEC17/LNX64/LOAD/POPSGN.EXE: cannot execute binary file
>> /opt/aips/31DEC17/SYSTEM/UNIX/run: line 157:
>> /opt/aips/31DEC17/LNX64/LOAD/POPSGN.EXE: Undefined error: 0
>>
>> 5》then I tried to see although I failed to run the the final steps, I
>> could also open the aips. In fact, it didn’t work.
>>
>> Bamboo:aips cuiyuzhu$ source ./LOGIN.SH
>> Bamboo:aips cuiyuzhu$ aips tv=local
>> START_AIPS: Will use or start first available Unix Socket based TV
>> START_AIPS: Your initial AIPS printer is the mizusawa
>> START_AIPS: - system name KONICA_MINOLTA_bizhub_C554e_2F, AIPS type PS
>>
>>
>>
>> START_AIPS: User data area assignments:
>> DADEVS.PL: This program is untested under Perl version 5.018
>> (Using global default file /opt/aips/DA00/DADEVS.LIST for DADEVS.PL)
>> Disk 1 (1) is /opt/aips/DATA/LOCALHOST_1
>>
>> Tape assignments:
>> Tape 1 is REMOTE
>> Tape 2 is REMOTE
>>
>>
>>
>> START_AIPS: Starting TV servers on localhost asynchronously
>> START_AIPS: - WITH Unix Sockets as requested...
>> START_AIPS: Starting TPMON daemons on LOCALHOST asynchronously...
>> Starting up 31DEC17 AIPS with normal priority
>> /opt/aips/31DEC17/SYSTEM/UNIX/AIPSEXEC: line 324:
>> /opt/aips/31DEC17/LNX64/LOAD/ZSTRTA.EXE: cannot execute binary file
>> /opt/aips/31DEC17/SYSTEM/UNIX/AIPSEXEC: line 324:
>> /opt/aips/31DEC17/LNX64/LOAD/ZSTRTA.EXE: Undefined error: 0
>> Bamboo:aips cuiyuzhu$ DADEVS.PL: This program is untested under Perl
>> version 5.018
>> UNIXSERVERS: Start TV LOCK daemon TVSRV1 on localhost
>> /opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 176:
>> /opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/NEWEST: cannot execute binary file
>> /opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 176: [: =: unary
>> operator expected
>> /opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 201: ./TVSRV1: cannot
>> execute binary file
>> UNIXSERVERS: Start XAS1 on localhost, DISPLAY
>> /private/tmp/com.apple.launchd.w4lWSv64fP/org.macosforge.xquartz:0
>> /opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 233:
>> /opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/NEWEST: cannot execute binary file
>> /opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 233: [: =: unary
>> operator expected
>> /opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 255: ./XAS1: cannot
>> execute binary file
>> UNIXSERVERS: Start graphics server TKSRV1 on localhost, display
>> /private/tmp/com.apple.launchd.w4lWSv64fP/org.macosforge.xquartz:0
>> /opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 296:
>> /opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/NEWEST: cannot execute binary file
>> /opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 296: [: =: unary
>> operator expected
>> UNIXSERVERS: Start message server MSSRV1 on localhost, display
>> /private/tmp/com.apple.launchd.w4lWSv64fP/org.macosforge.xquartz:0
>> /opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 404:
>> /opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/NEWEST: cannot execute binary file
>> /opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 404: [: =: unary
>> operator expected
>> /opt/aips/31DEC17/SYSTEM/UNIX/STARTPMON: line 205:
>> /opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/AIPWD: cannot execute binary file
>> STARTPMON: [LOCALHOST] Old TPMON1 link found in /opt/aips/31DEC17/LNX64/LOAD
>> STARTPMON: [LOCALHOST] - will TRY to replace & restart it here.
>> STARTPMON: [LOCALHOST] - TPMON daemons on other LNX64 hosts may need
>> restarted.
>> STARTPMON: [LOCALHOST] Starting TPMON1 with output SUPPRESSED
>> /opt/aips/31DEC17/SYSTEM/UNIX/STARTPMON: line 280: ./TPMON1: cannot
>> execute binary file
>>
>> Bamboo:aips cuiyuzhu$ Warning: locale not supported by Xlib, locale set to C
>> Warning: locale not supported by Xlib, locale set to C
>>
>> I have tried to figure out what is going wrong. But I also failed after
>> almost a week. Look forward to receiving your results.
>> P.s. sorry for sending an incomplete email by mistaking before this email.
>>
>> Thank you very much!
>>
>> Best regards,
>> Cui Yuzhu
>
>
> The $HOME/.AIPSRC file is written by install.pl after you answer questions. The architecture is NOT, I repeat NOT, LNX64. It is MACINT.
>
> If I were you I would delete your .AIPSRC file and start over with
>
> perl install.pl -n
>
> Eric Greisen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listmgr.nrao.edu/pipermail/daip/attachments/20170512/d70edf54/attachment-0001.html>
More information about the Daip
mailing list