[daip] Ask for help to install the AIPS on the newest MacBook Pro
cuiyuzhu
cyz3640 at 126.com
Thu May 11 05:47:31 EDT 2017
Dear AIPS professor,
I will be a PhD student in NAOJ from this October. Recently, I wanted to install the 31DEC17 version of AIPS on my MacBook Pro(macOS Sierra 10.12.3). But I came across a few problems. Wish you could have time to have a look at it.
1》First of all, I followed the steps on the websitehttp://www.aips.nrao.edu/install.shtml <http://www.aips.nrao.edu/install.shtml>, and set some parameters as listed:
AIPS_ROOT (screen 3): /opt/aips
Group (screen 4): everyone
Group Write (screen 4): YES
Architecture (screen 5): LNX64
Site name (screen 5): AIPSUSER
AIPS hosts (screen 6): LOCALHOST
Data areas (screen 7): /DATA/LOCALHOST_1
Printers (screen 8): pscolor ... NONE 2nd floor printer
Paper type (screen 8): A4
Tape drives (screen 9):
Tape hosts (screen 9): 127.0.0.1
2》Then form the MNJ, I got these messages:
AipsWiz: About to run 'MAKE.BMNJ '...
AipsWiz: This will generate a fair bit of output.
AIPS_VERSION=/opt/aips/31DEC17
MAKE.BMNJ - Moving to /opt/aips/31DEC17/LNX64/UPDATE
MAKE.BMNJ - The binary MNJ now uses rsync for updates;
MAKE.BMNJ - but cvs (http://www.cvshome.org) may be useful;
MAKE.BMNJ - looking to see if I can find a copy of it....
MAKE.BMNJ - I cannot seem to find it, either it is not here or it is
MAKE.BMNJ - here, but it is installed in a place that is not in your
MAKE.BMNJ - search path. If it is not here, you should install it and
MAKE.BMNJ - run MAKE.BMNJ again. Otherwise, please tell me where you
MAKE.BMNJ - put it.
-n MAKE.BMNJ - Full path to cvs: :
./MAKE.BMNJ: line 65: [: too many arguments
MAKE.BMNJ - Setting up your MNJ settings in
MAKE.BMNJ - /opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/UPDCONFIG:
MAKE.BMNJ - --------------------------
# Created by MAKE.MNJ on Thu May 11 02:15:16 UTC 2017
cvscmd=
ClientName=localhost
MailList=cuiyuzhu
ErrorList=cuiyuzhu,aipsmgr at nrao.edu
MAKE.BMNJ - --------------------------
MAKE.BMNJ - If you wish to change any of these settings, refer to the
MAKE.BMNJ - comments at the start of /opt/aips/31DEC17/SYSTEM/UNIX/UPDATE/UPDCONFIG
MAKE.BMNJ - and edit /opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/UPDCONFIG yourself.
-n MAKE.BMNJ - Press <RETURN> to acknowledge...:
MAKE.BMNJ - cvs needs to be primed by a login operation; this
MAKE.BMNJ - is also a good time to test and make sure you can
MAKE.BMNJ - connect to our server. We will now try to login to
MAKE.BMNJ - the server (mnj.aoc.nrao.edu); when prompted for
MAKE.BMNJ - a password, just hit the enter or return key.
./MAKE.BMNJ: line 135: -d: command not found
MAKE.BMNJ - Created /Users/cuiyuzhu/do_daily.localhost
MAKE.BMNJ - Please inspect it to make sure it fits your needs.
-n MAKE.BMNJ - Press <RETURN> when ready to proceed...:
MAKE.BMNJ - You might want to add a crontab entry, e.g.
30 1 * * 1-6 /Users/cuiyuzhu/do_daily.localhost
MAKE.BMNJ - when you are ready to start the MNJ.
MAKE.BMNJ - Your configuration for the AIPS midnight job is complete.
AipsWiz: =========================================================
AipsWiz: MAKE.BMNJ seemed to work (/opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/UPDCONFIG found)
AipsWiz: ==> Press <ENTER> to continue...:
AipsWiz: =====> Generate system files via FILAIP/POPSGN...
AipsWiz: This will generate some output, including a copyright (left)
AipsWiz: statement and some prompts, but should end with a 'Done!' if
AipsWiz: everything worked...
AipsWiz: About to run FILAIP. If this is a re-installation, you
AipsWiz: will be prompted for an AIPS Manager password. The
AipsWiz: default password is AMANAGER
Data disk assignments:
DADEVS.PL: This program is untested under Perl version 5.018
(Using global default file /opt/aips/DA00/DADEVS.LIST for DADEVS.PL)
Disk 1 (1) is /opt/aips/DATA/LOCALHOST_1
Starting up FILAIP (RELEASE OF 31DEC17)
/opt/aips/31DEC17/SYSTEM/UNIX/RUN: line 157: /opt/aips/31DEC17/LNX64/LOAD/FILAIP.EXE: cannot execute binary file
/opt/aips/31DEC17/SYSTEM/UNIX/RUN: line 157: /opt/aips/31DEC17/LNX64/LOAD/FILAIP.EXE: Undefined error: 0
AipsWiz: Error: FILAIP did not work, or there's a missing file!
AipsWiz: Error: This may mean that FILAIP did not work (it should have
AipsWiz: Error: created it and many other files in that area).
AipsWiz: Error: You can try running it by hand after (a) dotting the
AipsWiz: Error: LOGIN.SH file or sourcing the LOGIN.CSH file; and
AipsWiz: Error: (b) Typing 'RUN FILAIP'. You will then be asked for
AipsWiz: Error: two parameters. Use
8 2
AipsWiz: Error: as the standard values.
AipsWiz: Error: You will also have to RUN POPSGN if that works;
AipsWiz: Error: Feed it
0 POPSDAT TST
AipsWiz: Error: when it asks for Idebug, etc. and press RETURN when
AipsWiz: Error: you see the '>' prompt.
AipsWiz: Install Wizard stopping. Current settings saved in ~/.AIPSRC
AipsWiz: Abandoning ship! Goodbye.
3》as the “Running FILAIP, POPSGN, SETPAR” said, I run the filaip by myself. The errors showed：
bash-3.2# run FILAIP
Data disk assignments:
DADEVS.PL: This program is untested under Perl version 5.018
(Using global default file /opt/aips/DA00/DADEVS.LIST for DADEVS.PL)
Disk 1 (1) is /opt/aips/DATA/LOCALHOST_1
Starting up FILAIP (RELEASE OF 31DEC17)
/opt/aips/31DEC17/SYSTEM/UNIX/run: line 157: /opt/aips/31DEC17/LNX64/LOAD/FILAIP.EXE: cannot execute binary file
/opt/aips/31DEC17/SYSTEM/UNIX/run: line 157: /opt/aips/31DEC17/LNX64/LOAD/FILAIP.EXE: Undefined error: 0
4》so is the “POPSGN”
bash-3.2# run POPSGN
Data disk assignments:
DADEVS.PL: This program is untested under Perl version 5.018
(Using global default file /opt/aips/DA00/DADEVS.LIST for DADEVS.PL)
Disk 1 (1) is /opt/aips/DATA/LOCALHOST_1
Starting up POPSGN (RELEASE OF 31DEC17)
/opt/aips/31DEC17/SYSTEM/UNIX/run: line 157: /opt/aips/31DEC17/LNX64/LOAD/POPSGN.EXE: cannot execute binary file
/opt/aips/31DEC17/SYSTEM/UNIX/run: line 157: /opt/aips/31DEC17/LNX64/LOAD/POPSGN.EXE: Undefined error: 0
5》then I tried to see although I failed to run the the final steps, I could also open the aips. In fact, it didn’t work.
Bamboo:aips cuiyuzhu$ source ./LOGIN.SH
Bamboo:aips cuiyuzhu$ aips tv=local
START_AIPS: Will use or start first available Unix Socket based TV
START_AIPS: Your initial AIPS printer is the mizusawa
START_AIPS: - system name KONICA_MINOLTA_bizhub_C554e_2F, AIPS type PS
START_AIPS: User data area assignments:
DADEVS.PL: This program is untested under Perl version 5.018
(Using global default file /opt/aips/DA00/DADEVS.LIST for DADEVS.PL)
Disk 1 (1) is /opt/aips/DATA/LOCALHOST_1
Tape assignments:
Tape 1 is REMOTE
Tape 2 is REMOTE
START_AIPS: Starting TV servers on localhost asynchronously
START_AIPS: - WITH Unix Sockets as requested...
START_AIPS: Starting TPMON daemons on LOCALHOST asynchronously...
Starting up 31DEC17 AIPS with normal priority
/opt/aips/31DEC17/SYSTEM/UNIX/AIPSEXEC: line 324: /opt/aips/31DEC17/LNX64/LOAD/ZSTRTA.EXE: cannot execute binary file
/opt/aips/31DEC17/SYSTEM/UNIX/AIPSEXEC: line 324: /opt/aips/31DEC17/LNX64/LOAD/ZSTRTA.EXE: Undefined error: 0
Bamboo:aips cuiyuzhu$ DADEVS.PL: This program is untested under Perl version 5.018
UNIXSERVERS: Start TV LOCK daemon TVSRV1 on localhost
/opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 176: /opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/NEWEST: cannot execute binary file
/opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 176: [: =: unary operator expected
/opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 201: ./TVSRV1: cannot execute binary file
UNIXSERVERS: Start XAS1 on localhost, DISPLAY /private/tmp/com.apple.launchd.w4lWSv64fP/org.macosforge.xquartz:0
/opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 233: /opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/NEWEST: cannot execute binary file
/opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 233: [: =: unary operator expected
/opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 255: ./XAS1: cannot execute binary file
UNIXSERVERS: Start graphics server TKSRV1 on localhost, display /private/tmp/com.apple.launchd.w4lWSv64fP/org.macosforge.xquartz:0
/opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 296: /opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/NEWEST: cannot execute binary file
/opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 296: [: =: unary operator expected
UNIXSERVERS: Start message server MSSRV1 on localhost, display /private/tmp/com.apple.launchd.w4lWSv64fP/org.macosforge.xquartz:0
/opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 404: /opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/NEWEST: cannot execute binary file
/opt/aips/31DEC17/SYSTEM/UNIX/UNIXSERVERS: line 404: [: =: unary operator expected
/opt/aips/31DEC17/SYSTEM/UNIX/STARTPMON: line 205: /opt/aips/31DEC17/LNX64/SYSTEM/AIPSUSER/AIPWD: cannot execute binary file
STARTPMON: [LOCALHOST] Old TPMON1 link found in /opt/aips/31DEC17/LNX64/LOAD
STARTPMON: [LOCALHOST] - will TRY to replace & restart it here.
STARTPMON: [LOCALHOST] - TPMON daemons on other LNX64 hosts may need restarted.
STARTPMON: [LOCALHOST] Starting TPMON1 with output SUPPRESSED
/opt/aips/31DEC17/SYSTEM/UNIX/STARTPMON: line 280: ./TPMON1: cannot execute binary file
Bamboo:aips cuiyuzhu$ Warning: locale not supported by Xlib, locale set to C
Warning: locale not supported by Xlib, locale set to C
I have tried to figure out what is going wrong. But I also failed after almost a week. Look forward to receiving your results.
P.s. sorry for sending an incomplete email by mistaking before this email.
Thank you very much！
Best regards,
Cui Yuzhu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listmgr.nrao.edu/pipermail/daip/attachments/20170511/c17ce2b3/attachment-0001.html>
More information about the Daip
mailing list