[daip] DFTPL
Eric Greisen
egreisen at nrao.edu
Tue Aug 16 15:12:57 EDT 2016
On 08/16/2016 01:09 PM, zadeh wrote:
> Hi Eric,
> I am sorry to bug you but I am not sure why DFTPL does not seem to work.
> Any suggestions?
> Farhad
>
>
> Task DFTPL (release of 31DEC16) begins
> grote.> DFTPL4: UVGET: Using flag table version 1 to edit data
> grote.> DFTPL4: TABINI: REQUESTED CH FILE 1 DOES NOT EXIST
> grote.> DFTPL4: ERROR 2 READING FREQUENCIES WITH CHNDAT
> grote.> DFTPL4: Purports to die of UNNATURAL causes
> grote.> DFTPL4: grote 31DEC16 TST: Cpu= 0.0 Real= 0
> IO= 18
>
> AIPS 4: DFTPL Plots the DFT of an arbitrary point using UV data
> AIPS 4: Adverbs Values Comments
> AIPS 4: ----------------------------------------------------------------
> AIPS 4: USERID 0 File owner number - ignored
> AIPS 4: INNAME 'sg_Q_13Jul16' Input UV file name (name)
> AIPS 4: INCLASS 'A&P' Input UV file name (class)
> AIPS 4: INSEQ 1 Input UV file name (seq. #)
> AIPS 4: INDISK 2 Input UV file disk unit #
> AIPS 4: UVRANGE 100 1000000 Range of projected spacings
> AIPS 4: (thousands of wavelengths)
> AIPS 4: TIMERANG *all 0 Time range to select:
> AIPS 4: Start Day, Hour, Min, Sec
> AIPS 4: End Day, Hour, Min, Sec
> AIPS 4: SHIFT 0 0 Shift in asec at ref position
> AIPS 4: BPARM 5 30 Control parameters
> AIPS 4: 0 0 1 : Correlator number
> AIPS 4: 0 0 2 : averaging interval (sec)
> AIPS 4: 0 0 3 : > 0.0 => fixed scale
> AIPS 4: 2 0 < 0.0 => fixed range
> AIPS 4: 4 : Xmin (fixed scale)
> AIPS 4: 5 : Xmax (fixed scale)
> AIPS 4: ** press RETURN for more, enter Q or next line to quit print **
> #
> AIPS 4: 6 : Ymin (fixed scale)
> AIPS 4: 7 : Ymax (fixed scale)
> AIPS 4: 8 : X/Y axis ratio
> AIPS 4: 9 : 1 plots points only
> AIPS 4: 2 plots points and
> AIPS 4: error bars
> AIPS 4: 3 plots histogram
> AIPS 4: 10 : scale factor for points
> AIPS 4: SOURCES *all ' ' Source name
> AIPS 4: QUAL -1 Calibrator qualifier -1=>all
> AIPS 4: CALCODE ' ' Calibrator code ' '=>all
> AIPS 4: SELBAND -1 Bandwidth to select (kHz)
> AIPS 4: SELFREQ -1 Frequency to select (MHz)
> AIPS 4: FREQID 1 Frequency ID number: 0 -> 1
> AIPS 4: SUBARRAY 0 Sub-array, 0=>all
> AIPS 4: BIF 41 First IF to include
> AIPS 4: EIF 41 Last IF to include
> AIPS 4: BCHAN 5 First channel to include
> AIPS 4: ECHAN 55 Last channel to include
> AIPS 4: DOCALIB -1 > 0 calibrate data & weights
> AIPS 4: > 99 do NOT calibrate weights
> AIPS 4: ** press RETURN for more, enter Q or next line to quit print **
> #
> AIPS 4: GAINUSE 0 CL (or SN) table to apply
> AIPS 4: DOPOL -1 If >0.5 correct polarization.
> AIPS 4: PDVER 0 PD table to apply (DOPOL>0)
> AIPS 4: BLVER -1 BL table to apply.
> AIPS 4: FLAGVER 1 Flag table version
> AIPS 4: DOBAND -1 If >0.5 apply bandpass cal.
> AIPS 4: Method used depends on value
> AIPS 4: of DOBAND (see HELP file).
> AIPS 4: BPVER -1 Bandpass table version
> AIPS 4: SMOOTH *all 0 Smoothing function. See
> AIPS 4: HELP SMOOTH for details.
> AIPS 4: DOCIRCLE -1 > 0 => extend ticks to form
> AIPS 4: coordinate grid
> AIPS 4: PRTLEV 0 > 0 => print time, flux, and
> AIPS 4: error to message file
> AIPS 4: LTYPE 3 Type of labeling: 1 border,
> AIPS 4: 2 no ticks, 3 - 6 standard,
> AIPS 4: 7 - 10 only tick labels
> AIPS 4: <0 -> no date/time
> AIPS 4: DOTV -1 > 0 Do plot on the TV, else
> AIPS 4: make a plot file
> AIPS 4: ** press RETURN for more, enter Q or next line to quit pr
I bet that your file does not have an FQ table attached. An IMHEAD will
show what tables are attached. How you lost that essential file I do
not know.
Eric Greisen
More information about the Daip
mailing list