[daip] 31DEC14 LINUX midnite job (dave, 20140304.044424)

[aipsmgr at nrao.edu]

dave update report for 31DEC14 on Tue Mar  4 04:45:18 UTC 2014 (UT)

Copies and compiles:

AIPSUPD - Using CVS for copying files.
UPDCVS - cvs copy of 31DEC14 begun, 1st character means
 - U added, P updated, M your file differs from master
 - C you have a changed file needing work (error!)
 - ? you have a file not on the master (ignore)
? 31DEC14/LNX64/SYSTEM/RSYNC.MASTER
U 31DEC14/TIMESTAMP
P 31DEC14/APL/PGM/OOP/SPECR.FOR
P 31DEC14/HELP/SPECR.HLP
P 31DEC14/HIST/CHANGE.DOC
P 31DEC14/UPDATE/COMLNK.UPD
U 31DEC14/UPDATE/COMLNK.UPD.SUM
U 31DEC14/UPDATE/LASTCVS.DAT
P 31DEC14/UPDATE/PUTBCK.UPD
U 31DEC14/UPDATE/PUTBCK.UPD.SUM
P 31DEC14/UPDATE/REASONS.UPD
U 31DEC14/UPDATE/REASONS.UPD.SUM
P 31DEC14/UPDATE/WHATISOUT.UPD
U 31DEC14/UPDATE/WHATISOUT.UPD.SUM
P 31DEC14/Y/PGM/NOTST/FTFLG.FOR
UPDCVS - cvs update of 31DEC14 completed
UPDCVS - cvs update of TEXT completed
AIPSUPD - UPDCVS apparently worked

UPDCONTROL - /home/AIPS/31DEC14/LINUX/UPDATE/LASTREMOVE.DAT = 20140303.044254
UPDCONTROL - /home/AIPS/31DEC14/LINUX/UPDATE/LASTCOPY.DAT = 20140303.044254
UPDCONTROL - /home/AIPS/31DEC14/LINUX/UPDATE/LASTCOMRPL.DAT = 20140303.044254
UPDCONTROL - /home/AIPS/31DEC14/LINUX/UPDATE/LASTCOMLNK.DAT = 20140303.044254

UPDCONTROL - Everything seems in order

UPDCOMRPL: COMRPLs


UPDCOMRPL: currently in /home/AIPS/31DEC14/LINUX/UPDATE

UPDCOMLNK: COMLNKs

03-MAR-2014 22:24:20 20140303 TST APGOOP   SPECR.FOR     egreisen
03-MAR-2014 22:39:56 20140303 TST YPGNOT   FTFLG.FOR     egreisen

UPDCOMLNK: currently in /home/AIPS/31DEC14/LINUX/UPDATE
UPDCOMLNK: /home/AIPS/31DEC14/APL/PGM/OOP/SPECR.FOR
UPDCOMLNK: /home/AIPS/31DEC14/Y/PGM/NOTST/FTFLG.FOR


UPDCONTROL - Reasons for file updates on Tue Mar  4 04:44:46 UTC 2014 (UT)

03-MAR-2014 22:24:07 20140303 TST APGOOP   SPECR.FOR     add simple interpolation
03-MAR-2014 22:24:08 20140303 TST HLPFIL   SPECR.HLP     add simple interpolation
03-MAR-2014 22:39:26 20140303 TST YPGNOT   FTFLG.FOR     leaves zeros like spflg used to
03-MAR-2014 22:41:33 20140303 TST HIST     CHANGE.DOC    chndat, snsmo, snplt

CHANGE.DOC entries:

14310.  February 25, 2014         CHNDAT                Eric
        The fundamental subroutine CHNDAT meant to read/write FQ
        tables had a path through it which would leave the LUN open.
        Corrected this to always make sure it is closed.
        Moved nowhere.

14311.  February 26, 2014           DOOSRO                Lorant
        Moved nowhere.

14312.  February 27, 2014          SNSMO               Eric
        Changed:
        1. Pass FREQS into CLPRAT and scale each rate by the
        appropriate FREQS before summing into the work array and then
        when comparing to the clip level.  Previously it used unscaled
        rates (so in sec/sec) and compared them to a clip level
        converted to sec/sec using the header frequency.  Some modes
        added together multiple IFs not converted back to Hz (and so
        having different values solely due to frequency).
        2. In CLPAPH, changed it to find the FREQ scaled rate using
        the frequency of the IF from which it took the rate.
        Previously it used the frequency of IFBEG.
        3. In REFRAT, summed the rates in Hz using the correct
        frequencies for each IF rather than in sec/sec and made the
        reverse correction in putting the rates back.
        4. Changed the delay smoothing routine into one for multi-band
        delay and one for each IF.  The latter gets pointers to the
        real and imaginary columns so that the phase may be corrected.
        5. Added NPIECE adverb to help and code.  It is used to undo
        the delay phase correction made by FRING and redo it with the
        smoothed delays.  Added frequency difference array to account
        for the FRING scaling and the difference between the reference
        pixel and the center of each IF.
        6. SMORAT is given the frequency array so that it can sum the
        rates in Hz rather than sec/sec and then put them back
        correctly fixing the units back to sec/sec.
        7. In SMOAPH, pick up rates in Hz at the frequency of the IF
        from which the rate info is taken.  Correct the multi-band
        phase term which had the wrong sign for the second
        polarization.  This made R-L phases appear where none were
        present before.
        8. Correct spelling of CUTOFF in history file.
        Moved nowhere.

14313.  February 27, 2014         SNPLT                 Eric
        The IF frequency for the second polarization, when
        differencing polarizations, was not set properly for rates.
        This led the rate plot with STOKES='DIFF' to be the same as
        with 'RR'.
        Moved nowhere.

14314.  March 3, 2014             SPECR                  Eric
        Added option to interpolate by normal interpolation functions
        including 2 point and Median window, although the help still
        recommends the FFT approach.
        Moved nowhere.

14315.  March 3, 2014                FTFLG               Eric
        Filled empty space with zeros rather than magic blanks in the
        fast gridding routine.  Like the fix June 21, 2013 in SPFLG.
        Moved nowhere.
14316.  March