[daip] 31DEC15 LINUX midnite job (dave, 20141205.044429)

[aipsmgr at nrao.edu]

dave update report for 31DEC15 on Fri Dec  5 04:45:59 UTC 2014 (UT)

Copies and compiles:

AIPSUPD - Using CVS for copying files.
UPDCVS - cvs copy of 31DEC15 begun, 1st character means
 - U added, P updated, M your file differs from master
 - C you have a changed file needing work (error!)
 - ? you have a file not on the master (ignore)
U 31DEC15/TIMESTAMP
P 31DEC15/APL/PGM/SAD.FOR
P 31DEC15/HELP/HLPTVSAD.HLP
P 31DEC15/HELP/TVSAD.HLP
P 31DEC15/HIST/CHANGE.DOC
P 31DEC15/UPDATE/COMLNK.UPD
U 31DEC15/UPDATE/COMLNK.UPD.SUM
U 31DEC15/UPDATE/LASTCVS.DAT
P 31DEC15/UPDATE/PUTBCK.UPD
U 31DEC15/UPDATE/PUTBCK.UPD.SUM
P 31DEC15/UPDATE/REASONS.UPD
U 31DEC15/UPDATE/REASONS.UPD.SUM
P 31DEC15/UPDATE/WHATISOUT.UPD
U 31DEC15/UPDATE/WHATISOUT.UPD.SUM
P 31DEC15/Y/PGM/TVSAD.FOR
UPDCVS - cvs update of 31DEC15 completed
UPDCVS - cvs update of TEXT completed
AIPSUPD - UPDCVS apparently worked

UPDCONTROL - /home/AIPS/31DEC15/LINUX/UPDATE/LASTREMOVE.DAT = 20141204.044240
UPDCONTROL - /home/AIPS/31DEC15/LINUX/UPDATE/LASTCOPY.DAT = 20141204.044240
UPDCONTROL - /home/AIPS/31DEC15/LINUX/UPDATE/LASTCOMRPL.DAT = 20141204.044240
UPDCONTROL - /home/AIPS/31DEC15/LINUX/UPDATE/LASTCOMLNK.DAT = 20141204.044240

UPDCONTROL - Everything seems in order

UPDCOMRPL: COMRPLs


UPDCOMRPL: currently in /home/AIPS/31DEC15/LINUX/UPDATE

UPDCOMLNK: COMLNKs

04-DEC-2014 22:46:42 20141204 TST APLPGM   SAD.FOR       egreisen
04-DEC-2014 22:43:49 20141204 TST YPGM     TVSAD.FOR     egreisen

UPDCOMLNK: currently in /home/AIPS/31DEC15/LINUX/UPDATE
UPDCOMLNK: /home/AIPS/31DEC15/APL/PGM/SAD.FOR
UPDCOMLNK: /home/AIPS/31DEC15/Y/PGM/TVSAD.FOR


UPDCONTROL - Reasons for file updates on Fri Dec  5 04:44:37 UTC 2014 (UT)

04-DEC-2014 22:42:44 20141204 TST HIST     CHANGE.DOC    sad, tvsad
04-DEC-2014 22:42:59 20141204 TST YPGM     TVSAD.FOR     does not clear transfer functions, curvalue
04-DEC-2014 22:43:00 20141204 TST HLPFIL   HLPTVSAD.HLP  curvalue
04-DEC-2014 22:43:01 20141204 TST HLPFIL   TVSAD.HLP     curvalue
04-DEC-2014 22:45:58 20141204 TST APLPGM   SAD.FOR       subtract further out from Gaussian center

CHANGE.DOC entries:

;  Copyright (C) 2014
                 Changes while 31DEC15 is TST
14498.  December 2, 2014         Version update               Eric
        $SYSPERL/LaCook.PL, $UPDUNIX/UPDCONTROL,
        to make 31DEC15 instead of 31DEC14 - also fix dates in
<         Added a choice to use the printer or DOCRT 0 instead.  Will
<         attention to NMAPS, which must be 0 to use IN2NAME et al as
<         is used (0 -lowest channel on at current pixel).
<         1. ZOPEN  changed messages to handle LUNs 99.
<         Changed DBCON so that DOPOS(2,1) 0 => change the frequency
<         verbose listing (DPARM(5) 0) also did not show when numbers
<         it is 0).
<         IMAGR      Add new adverb -CLEAN, parameterize # stars
<                    stars from BOXFILE -CLEAN object
<         3. KRING forbad a solution for REFANT 0 in all cases,
<         code < 0 =flagged not bad.
<         1. Default PIXVAL -10^9 rather than 100*FLUX.
<                    fo the string <nwhen displaying to the user.
<                    using the new <ncapability of TSKHLP.  Added a
<         3. XGAUS - help did not allow LTYPE 6.
<         while REFANT 0 means to use REFANT always.  This should keep
<         Added BPARM with (1) 0 => flag parallel hands when one of
<         cross-hands is flagged.  (2) 0 => flagg all polarizations
<         2. Gridding counters can overflow (2 billion) so it died
<         got in deep trouble.  Counters -double precision, error
<         Added the option to flag a range of IFs (when there are 2
14499.  December 4, 2014        SAD, TVSAD                Eric
<         SPFLG     Change to have DPARM(4) = 3 +use curvature and
<         UVPLT     Change to have DOSCALE = 3 =fit and use the full
<                   index - < 0 -none, =2 fit for curvature when
<                   index - < 0 -none, =2 fit for curvature when
<         EDROP >= BDROP and BDROP 1, NCOUNT will be set to at least
<         Added INVERS.  If 0, then require scans to have at least 1
<         (APARM(6) 0), to "normalize" the Tsys's to the average Tsys
<         the average.  Also added tests for 999 -blanked and tests
<         for TS 0 before using the value.
        SAD:     Subtract Gaussian over wider area, TVSAD suggested
                 that the previous setting really did not go far
                 enough.
        TVSAD:   1. Add CURVALUE option to both menus.
                 2. Have CURVALUE run when setting the Gaussian
                 parameters.
                 3. Allow up to 8 (parameterized) Gaussians in any one
                 island (only under user command).
        Also TVSAD and HLPTVSAD help files edited.
        Moved to 31DEC14 this date.
144500.  December