[daip] AIPS help
Xingying Liu
michellezzz at sjtu.edu.cn
Tue Apr 1 07:29:14 EDT 2014
Hello!
I find something confusing when using the Y2K benchmark in my desktop and really need your help.
Since I am using my desktop, I don't have a tape. So how should I set up the value of DDISK, TDISK, IOTAPE and Y2KDISK?
Now I set the value of Y2KDISK to be 'FITS', where FITS=/home/miao/Y2K, an area in my disk. And then I put my Y2KSUVDATA into this folder and run, but the file still cannot be found by AIPS.
The output is like this:
AIPS 1: * Read/Write the input visibility dataset:
AIPS 1: GET Y2K000RW
AIPS 1: Y2KPROC
AIPS 1: Limited to files matching name parms DY2KS .UVDATA. 0
AIPS 1: Destroy all files for user 400 disks 1- 1? enter YES or NO
AIPS 1: Disk Volume name Total Full Free Timd Access
AIPS 1: # Mbytes % Mbytes days
AIPS 1: 1 <e/miao/DATA/LOCALHOST_1 66822 46 34349 365 Alluser
AIPS 1: ZTPOPN: DISK DEVICE = FITS:Y2KSUVDATA1 NOT FOUND
AIPS 1: TAPIO: ERROR 2 OPENING FILE
AIPS 1: ALSO COULD NOT OPEN FITS:Y2KSUVDATA
AIPS 1: INVALID TAPE
The input is like this:
AIPS 1: Input variables
AIPS 1: TCODE 'READ' INIT,TEST,READ, or WRIT
AIPS 1: TMODE 'T' T or M
AIPS 1: TMASK 63 test selection bit mask
AIPS 1: Y2KSIZE 'SMALL' SMALL,MEDIUM,LARGE test
AIPS 1: DDISK 1 Disk drive #: master UVDATA
AIPS 1: MDISK 1 Disk drive #: other masters
AIPS 1: TDISK 1 Disk drive #: test files
AIPS 1: IOTAPE 1 Input/output tape drive #.
AIPS 1: Y2KDISK 'FITS' Disk area for READ and WRIT
AIPS 1: EDGSKP 0 Pixels to skip at edges
AIPS 1: TERSE 0 > 0 => reduced output
AIPS 1: OUTPRINT ' '
AIPS 1: Printer disk file to save
AIPS 1: BADDISK *all 0 Disks to avoid
AIPS 1: VERSION ' '
AIPS 1: Variables set and saved by Y2K
AIPS 1: INNAME 'TY2KS' Input file name
AIPS 1: OUTNAME 'MY2KS' Output file name
AIPS 1: INDISK 1 1st input disk #
AIPS 1: IN2DISK 1 2nd input disk #
AIPS 1: OUTDISK 1 Output disk #
AIPS 1: INTAPE 1 Input tape drive #.
AIPS 1: OUTTAPE 1 Output tape drive #.
AIPS 1: Y2KFILE 'FITS:Y2KS' Input/output area
AIPS 1: TNAMF 'Y2KS' Actual name ='Y2KS','Y2KM',..
AIPS 1: ROTATE -5 Image rotation in degrees
AIPS 1: IMSIZE 512 512 Image size
AIPS 1: CELLSIZE 1.15 1.15 Image cell size (arc sec)
AIPS 1: NITER 5000 Number clean components
AIPS 1: FLUX 5.5 Expected source flux (Jy)
AIPS 1: UVTAPER 0 0 Taper in UV plane
AIPS 1: ZEROSP *all 0 0-spacing fluxes and weights
AIPS 1: NOISE 0.0015 *rest 0 Noise level for VTESS
AIPS 1: SHIFT 6 -6 Image shift x,y in arcsec
AIPS 1: SCALR1 18.4 Pixels/beam for VTESS
AIPS 1: SCALR2 25 VTESS number iterations
AIPS 1: SCALR3 0 VTESS FLUX value
AIPS 1: NBOXES 1 Number Clean boxes
AIPS 1: CLBOX 138 178 Cleaning area
AIPS 1: 353 352 *rest 0
AIPS 1: MINPATCH 51 Min. BEAM half-width in AP.
AIPS 1: MAXPIXEL 10000 Max pixels for clean search
AIPS 1: NCOMP *all 0 Number merged comps for CALIB
AIPS 1: MPDIFS -100 -100 Comparison differences
I wonder what's the problem here.
If you could help me, I would appreciate it very much.
Thanks!
-----------
Michelle
Shanghai Jiao Tong University
More information about the Daip
mailing list