[daip] UVCOP error
Eric Greisen
egreisen at nrao.edu
Tue Nov 19 12:05:11 EST 2013
Christopher Hales wrote:
> Dear Eric,
>
> When I run UVCOP I encounter the following error in the message server:
>
> echidn> UVCOP1: Task UVCOP (release of 31DEC13) begins
> echidn> UVCOP1: Create 10-25F .UVEVLA. 1 (UV) on disk 1 cno 2
> echidn> UVCOP1: Applying flag table version 1 to the data
> echidn> UVCOP1: ZDAOPN: DELAY 1
> echidn> UVCOP1: ZDAOPN: DELAY 2
> echidn> UVCOP1: UVINIT: LREC, NPIO = 3079 0 ILLEGAL
> echidn> UVCOP1: UVINIT: OR NVIS, BUFSZ, OR BO = 02390016 1
> ILLEGAL
> echidn> UVCOP1: COPYUV: ERROR 2 INITING OUTPUT VIS FILE
> echidn> UVCOP1: Destroyed 1 extension files of type FQ
> echidn> UVCOP1: Destroyed UV image file: catno= 2 disk= 1
> echidn> UVCOP1: Purports to die of UNNATURAL causes
> echidn> UVCOP1: echidna 31DEC13 TST: Cpu= 0.0 Real= 2
>
>
> It seems to be having trouble forming a new vis file. I'm not an AIPS
> pro, so I'm having trouble tracking down the cause of this error.
>
> Could you please advise?
The message appears to be saying that there are no visibilities
selected. Since your UVCOP only contains 2 interesting adverbs (FLAGVER
and UVCOPP(3)=1) this suggests that there are no visibilities in the
input data set. Have you looked at IMHEADER, LISTR (OPTYPE='SCAN'),
PRTUV, etc. to make sure that you have actually read in data?
The BDF2AIPS error may have been fatal. Did you do BDFLIST and what
adverbs did you select in BDF2AIPS?
Eric Greisen
>
> For reference, I have listed my entries to UVCOP below. I also show
> output from PCAT.
>
> For broader context, I am using BDF2AIPS to import an SDM-BDF (VLA
> data). I then want to apply the online flags using UVCOP, then write out
> a uvfits file using FITAB. I will then import into CASA using
> importuvfits. The reason for my AIPS detour (rather than using CASA's
> importevla) is because my SDM-BDF has 15 spw's with 2048 channels and 4
> spw's with 64 channels. I only need access to the latter, and on a fast
> timescale. Not sure if it's worth mentioning, but I note that the
> BDF2AIPS log file contains the following error:
> BDFIn: Error 20131119T071525 GetData: Frequencies inconsistent
> 1015000000.000000 != 1768000000.000000, IF 1
> BDFIn: Error 20131119T071525 Occured at file BDFIn.c: line 2095
> (GetData)
>
> Thank you.
>
> Chris
>
>
>
>
>> inp
> AIPS 1: UVCOP Task to copy selected times and channels of uv data.
> AIPS 1: Adverbs Values Comments
> AIPS 1: ----------------------------------------------------------------
> AIPS 1: INNAME '10-25' Input UV file name (name)
> AIPS 1: INCLASS 'UVEVLA' Input UV file name (class)
> AIPS 1: INSEQ 1 Input UV file name (seq. #)
> AIPS 1: INDISK 1 Input UV file disk unit #
> AIPS 1: OUTNAME '10-25F' Output UV file name (name)
> AIPS 1: OUTCLASS 'UVEVLA' Output UV file name (class)
> AIPS 1: OUTSEQ 0 Output UV file name (seq. #)
> AIPS 1: OUTDISK 1 Output UV file disk unit #.
> AIPS 1: SELBAND -1 Bandwidth to select (kHz)
> AIPS 1: SELFREQ -1 Frequency to select (MHz)
> AIPS 1: FREQID -1 Freq. ID to select. 0=> all
> AIPS 1: BCHAN 1 First channel selected.
> AIPS 1: ECHAN 0 Last channel selected.
> AIPS 1: BIF 0 Lowest IF number 0=>all
> AIPS 1: EIF 0 Highest IF number 0=>all
> AIPS 1: SOURCES *all ' ' Source list
> AIPS 1: QUAL -1 Source qualifier -1=>all
> AIPS 1: UVRANGE 0 0 Annulus in uv plane selected
> AIPS 1: (thousands of wavelengths)
> AIPS 1: TIMERANG *all 0 Timerange:
> AIPS 1: 1-4 = start day,hr,min,sec
> AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
> #
> AIPS 1: 5-8 = end day,hr,min,sec
> AIPS 1: ANTENNAS *all 0 Antennas to copy 0=>all
> AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
> AIPS 1: SUBARRAY 0 Limit copy to one subarray
> AIPS 1: 0 => all.
> AIPS 1: FLAGVER 1 FG table to apply to data
> AIPS 1: <= 0 => do not apply
> AIPS 1: UVCOPPRM 0 0 Flags:
> AIPS 1: 1 *rest 0 1 > 0 => keep flagged data
> AIPS 1: 2 > 0 => drop subarray info
> AIPS 1: 3 = 0 => copy xc and ac data
> AIPS 1: = 1 => copy only xc data
> AIPS 1: = 2 => copy only ac data
> AIPS 1: of antennas, named in
> AIPS 1: antenna list. Baseline
> AIPS 1: list must be zero.
> AIPS 1: 4 > 0 => report progress
> AIPS 1: 5 => flag data with weights
> AIPS 1: below this limit
> AIPS 1: 6 = 1,3 -> do NOT flag TY/SY
> AIPS 1: = 2,3 -> do NOT flag SN
> AIPS 1: 7 = extend copy of tables
> AIPS 1: by UVCO(7) min, 0 -> 15
> AIPS 1: NCOUNT 0 If UVCOPPRM(3) = 2 then
> AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
> #
> AIPS 1: NCOUNT is the approximate
> AIPS 1: ratio of AC to XC in file.
>> go
> AIPS 1: Resumes
> AIPS 1: RETURN CODE 2 RECEIVED: STOPPING
>> pcat
> AIPS 1: Catalog on disk 1
> AIPS 1: Cat Usid Mapname Class Seq Pt Last access Stat
> AIPS 1: 1 999 10-25 .UVEVLA. 1 UV 19-NOV-2013 08:32:28
More information about the Daip
mailing list