[daip] 31DEC13 LINUX midnite job (dave, 20130708.034400)

aipsmgr at nrao.edu aipsmgr at nrao.edu
Sun Jul 7 23:44:56 EDT 2013 

dave update report for 31DEC13 on Mon Jul  8 03:44:56 UTC 2013 (UT)

Copies and compiles:

AIPSUPD - Using CVS for copying files.
UPDCVS - cvs copy of 31DEC13 begun, 1st character means
 - U added, P updated, M your file differs from master
 - C you have a changed file needing work (error!)
 - ? you have a file not on the master (ignore)
? 31DEC13/ERRORS
U 31DEC13/TIMESTAMP
P 31DEC13/APL/PGM/NOTST/IMFIT.FOR
P 31DEC13/APL/PGM/NOTST/JMFIT.FOR
P 31DEC13/APL/PGM/NOTST/SETJY.FOR
P 31DEC13/HELP/SETJY.HLP
P 31DEC13/HIST/CHANGE.DOC
P 31DEC13/UPDATE/COMLNK.UPD
U 31DEC13/UPDATE/COMLNK.UPD.SUM
U 31DEC13/UPDATE/LASTCVS.DAT
P 31DEC13/UPDATE/PUTBCK.UPD
U 31DEC13/UPDATE/PUTBCK.UPD.SUM
P 31DEC13/UPDATE/REASONS.UPD
U 31DEC13/UPDATE/REASONS.UPD.SUM
P 31DEC13/UPDATE/WHATISOUT.UPD
U 31DEC13/UPDATE/WHATISOUT.UPD.SUM
UPDCVS - cvs update of 31DEC13 completed
UPDCVS - cvs update of TEXT completed
AIPSUPD - UPDCVS apparently worked

UPDCONTROL - /home/AIPS/31DEC13/LINUX/UPDATE/LASTREMOVE.DAT = 20130707.034301
UPDCONTROL - /home/AIPS/31DEC13/LINUX/UPDATE/LASTCOPY.DAT = 20130707.034301
UPDCONTROL - /home/AIPS/31DEC13/LINUX/UPDATE/LASTCOMRPL.DAT = 20130707.034301
UPDCONTROL - /home/AIPS/31DEC13/LINUX/UPDATE/LASTCOMLNK.DAT = 20130707.034301

UPDCONTROL - Everything seems in order

UPDCOMRPL: COMRPLs


UPDCOMRPL: currently in /home/AIPS/31DEC13/LINUX/UPDATE

UPDCOMLNK: COMLNKs

07-JUL-2013 18:30:55 20130707 TST APGNOT   IMFIT.FOR     egreisen
07-JUL-2013 18:31:11 20130707 TST APGNOT   JMFIT.FOR     egreisen
07-JUL-2013 19:23:38 20130707 TST APGNOT   SETJY.FOR     egreisen

UPDCOMLNK: currently in /home/AIPS/31DEC13/LINUX/UPDATE
UPDCOMLNK: /home/AIPS/31DEC13/APL/PGM/NOTST/IMFIT.FOR
UPDCOMLNK: /home/AIPS/31DEC13/APL/PGM/NOTST/JMFIT.FOR
UPDCOMLNK: /home/AIPS/31DEC13/APL/PGM/NOTST/SETJY.FOR


UPDCONTROL - Reasons for file updates on Mon Jul  8 03:44:22 UTC 2013 (UT)

07-JUL-2013 18:30:10 20130707 TST APGNOT   IMFIT.FOR     negative error bars
07-JUL-2013 18:30:11 20130707 TST APGNOT   JMFIT.FOR     negative error bars
07-JUL-2013 18:30:13 20130707 TST HIST     CHANGE.DOC    rmfit, xgaus, jmfit
07-JUL-2013 19:23:22 20130707 TST APGNOT   SETJY.FOR     alternative velocity
07-JUL-2013 19:23:23 20130707 TST HLPFIL   SETJY.HLP     alternative velocity
07-JUL-2013 19:27:29 20130707 TST HIST     CHANGE.DOC    setjy VANT

CHANGE.DOC entries:

14172.  July 5, 2013               RMFIT                Eric
        Changed GRPOLY to test a vertex for being on an image before
        recording it so that one will not get vertices that fail in
        the exit portion of the routine.  Also changed the conversion
        to integer vertices to be fully rounded off - zoomed image
        display coordinates led to wrong integer pixels.
        Changed RMFIT:
        1. Display formats needed more generality.
        2. Solutions for Q and U have an ambiguity of 180 degrees so
        the total polarization found could also be negative.  Added
        test for this to make it positive with 90 degrees added to the
        theta_0.
        3. Typo in amplitude tests caused all high flux cases to look
        bad even if they weren't.
        4. Changed to allow there to be no I image.
        5. Added display of the rms residual in Q and U.
        6. It was hard to tell tiny images from the step wedge.
        Changed the size of the step wedge in Y to no more than the
        image size in Y and added some space between the wedge and the
        image.  Added a line around the edge of the image (using a
        graphics plane > 4).
        7. Changed the GRPOLY usage so an error does not cause the
        task to die.  Moved the zeroing of the polygonal overlay
        graphics plane (3) to a place where it will be done even on
        error.
        8. Changed the option handling (return from TVMENU) to be
        string oriented rather than by the sequential numbers.  This
        greatly simplifies new development.
        9. TV loading was changed to handle images larger than the TV.
        Previously it just showed the central portion.  Now it does
        all every n'th pixel and then, on a new menu item, cycles
        between subimages each with every pixel.  After all subimages,
        it starts over with the full image every n'th pixel.
        10. Changed the help files to reflect menu changes.
        Moved nowhere.

14173.  July 5, 2013              XGAUS                  Eric
        Corrected recording of the error in width which was going to
        the error in the next component amplitude.
        Made RMFIT changes to (6) control wedge size and placement,
        (7) handle GRPOLY more carefully, (8) to use string methods
        following TVMENU, (9) to manage large images usefully, and
        (10) to update the help files accordingly.
        Moved nowhere.

14174.  July 5, 2013               JMFIT                 Eric
        JMFIT failed to return the error values in DOMAX and DOPOS.
        It returned DOWIDTH.
        Moved nowhere.

14175.  July 7, 2013           IMFIT, JMFIT             Eric
        When the Gaussian peak was negative, it was possible for the
        error bars to be negative also.  Put absolute value on all
        error bars.  This issue caused DOPOS and DOWIDTH to be
        returned as negative values so that the next fit held them
        constant.
        Moved fix only to patch.

14176.  July 7, 2013              SETJY                 Eric
        Added OPTYPE 'VANT' to do VCAL but wrt an antenna specified in
        APARM(5).
        Moved nowhere.

14177.  July

More information about the Daip mailing list