[daip] Load multiple fits files with FITLD
Arnaud Collioud
Arnaud.Collioud at obs.u-bordeaux1.fr
Wed Jan 23 03:31:18 EST 2013
Hi Eric, Hi Amy,
I am trying to process an EVLA dataset (project 12B-108) with AIPS (31DEC12). Once downloaded on NRAO archive, I got 2 uvfits files per observation (total of 4 files). I am trying to load the 2 uvfits files in the same AIPS file (as I am supposing that the 2 uvfits are 2 parts of the same observation) with FITLD, but without success. FITLD always creates 2 separate AIPS files.
Am I doing something wrong ?
Thanks !
Best regards,
Arnaud
>tget fitld
>inp
AIPS 1: FITLD: Task to store an image or UV data from a FITS tape
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: INTAPE 1 Input tape drive # (0 => 1)
AIPS 1: NFILES 0 # of files to advance on tape
AIPS 1: DATAIN '/mydir/56293_' Disk file name
AIPS 1: OUTNAME '56293_X' File name (name)
AIPS 1: OUTCLASS 'UVDATA' File name (class)
AIPS 1: OUTSEQ 0 File name (seq. #)
AIPS 1: 0 => highest unique number
AIPS 1: => matching (on VLBA)
AIPS 1: -1 => FITS tape value
AIPS 1: OUTDISK 1 Disk drive # (0 => any)
AIPS 1: OPTYPE ' ' Type of data to load,
AIPS 1: ' ' => all types
AIPS 1: 'UV' => UV data
AIPS 1: 'IM' => images
AIPS 1: NCOUNT 2 Number of files to load.
AIPS 1: DOTABLE 1 True (1.0) means load tables
AIPS 1: for images.
AIPS 1: DOUVCOMP 0 >0 => compressed data (FITS)
AIPS 1: DOCONCAT 1 >0 -> if VLBA correlator data
AIPS 1: append data to existing
AIPS 1: files, or if no appropriate
AIPS 1: files exist create a new file
AIPS 1: and append all data to that
AIPS 1: file.
AIPS 1: DOKEEP 0 > 0 -> keep fully flagged
AIPS 1: data records
AIPS 1: NPIECE 2 Maximum uv table piece to
AIPS 1: load (ignored for tape unless
AIPS 1: NCOUNT = 1)
AIPS 1: ERROR -1 >= 2 -> do not use AIPS
AIPS 1: history in the FITS file
AIPS 1: *****************************
AIPS 1: Following adverbs are useful
AIPS 1: only when reading VLBA IDI
AIPS 1: distribution tapes.
AIPS 1: *****************************
AIPS 1: CLINT 0 CL entry interval (min)
AIPS 1: 0 => 1 minute.
AIPS 1: SOURCES *all ' ' Source list to accept.
AIPS 1: QUAL -1 Source qualifier -1=>all
AIPS 1: TIMERANG *all 0 Timerange selected
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: BCHAN 1 Lowest spectral channel
AIPS 1: number to select in each IF.
AIPS 1: 0=>1
AIPS 1: ECHAN 0 Highest spectral channel
AIPS 1: number to select in each IF.
AIPS 1: 0=>highest
AIPS 1: BIF 0 Lowest IF number 0=>1
AIPS 1: EIF 0 Highest IF number 0=>all
AIPS 1: DIGICOR -1 Controls the application of
AIPS 1: the VLBA correlator's digital
AIPS 1: correction.
AIPS 1: 0 or 1 => perform corrections
AIPS 1: 2 => perform cross-power
AIPS 1: corrections, do total-power
AIPS 1: only if zero padding used.
AIPS 1: -1 => do NOT perform
AIPS 1: corrections.
AIPS 1: SEE HELP for more details
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz).
AIPS 1: See HELP.
AIPS 1: FQTOL -1 Frequency tolerance assigned
AIPS 1: to SELFREQ, FITLD will select
AIPS 1: data with freq. of SELFREQ
AIPS 1: +/- FQTOL.
AIPS 1: The unit of FQTOL is kHz.
AIPS 1: <=0 => 10 kHz
AIPS 1: WTTHRESH 0 Flagging threshold based on
AIPS 1: weights. See HELP.
AIPS 1: 0 => no flagging
AIPS 1: 1 => will flag ALL data
AIPS 1: OPCODE ' ' Specify if wish to keep VT
AIPS 1: (VLBA Tape Statistics) table
AIPS 1: and other tables. See HELP.
AIPS 1: ' ' => do not save tables
AIPS 1: ANTNAME *all ' ' List antenna station names in
AIPS 1: desired order (IDI data only)
More information about the Daip
mailing list