[daip] 31DEC13 LINUX midnite job (dave, 20130110.044421)

[aipsmgr at nrao.edu]

dave update report for 31DEC13 on Thu Jan 10 04:44:50 UTC 2013 (UT)

Copies and compiles:

AIPSUPD - Using CVS for copying files.
UPDCVS - cvs copy of 31DEC13 begun, 1st character means
 - U added, P updated, M your file differs from master
 - C you have a changed file needing work (error!)
 - ? you have a file not on the master (ignore)
U 31DEC13/TIMESTAMP
P 31DEC13/APL/PGM/NOTST/SYCOP.FOR
P 31DEC13/APL/PGM/NOTST/TYAPL.FOR
P 31DEC13/HELP/SYCOP.HLP
P 31DEC13/HELP/TYAPL.HLP
P 31DEC13/HIST/CHANGE.DOC
P 31DEC13/UPDATE/COMLNK.UPD
U 31DEC13/UPDATE/COMLNK.UPD.SUM
U 31DEC13/UPDATE/LASTCVS.DAT
P 31DEC13/UPDATE/PUTBCK.UPD
U 31DEC13/UPDATE/PUTBCK.UPD.SUM
P 31DEC13/UPDATE/REASONS.UPD
U 31DEC13/UPDATE/REASONS.UPD.SUM
P 31DEC13/UPDATE/WHATISOUT.UPD
U 31DEC13/UPDATE/WHATISOUT.UPD.SUM
UPDCVS - cvs update of 31DEC13 completed
UPDCVS - cvs update of TEXT completed
AIPSUPD - UPDCVS apparently worked

UPDCONTROL - /home/AIPS/31DEC13/LINUX/UPDATE/LASTREMOVE.DAT = 20130109.044249
UPDCONTROL - /home/AIPS/31DEC13/LINUX/UPDATE/LASTCOPY.DAT = 20130109.044249
UPDCONTROL - /home/AIPS/31DEC13/LINUX/UPDATE/LASTCOMRPL.DAT = 20130109.044249
UPDCONTROL - /home/AIPS/31DEC13/LINUX/UPDATE/LASTCOMLNK.DAT = 20130109.044249

UPDCONTROL - Everything seems in order

UPDCOMRPL: COMRPLs


UPDCOMRPL: currently in /home/AIPS/31DEC13/LINUX/UPDATE

UPDCOMLNK: COMLNKs

09-JAN-2013 23:56:48 20130109 TST APGNOT   SYCOP.FOR     egreisen
09-JAN-2013 23:57:12 20130109 TST APGNOT   TYAPL.FOR     egreisen

UPDCOMLNK: currently in /home/AIPS/31DEC13/LINUX/UPDATE
UPDCOMLNK: /home/AIPS/31DEC13/APL/PGM/NOTST/SYCOP.FOR
UPDCOMLNK: /home/AIPS/31DEC13/APL/PGM/NOTST/TYAPL.FOR


UPDCONTROL - Reasons for file updates on Thu Jan 10 04:44:41 UTC 2013 (UT)

09-JAN-2013 23:56:21 20130109 TST HIST     CHANGE.DOC    sycop, tyapl
09-JAN-2013 23:56:32 20130109 TST APGNOT   SYCOP.FOR     allow copy between polarizations
09-JAN-2013 23:56:33 20130109 TST HLPFIL   SYCOP.HLP     allow copy between polarizations
09-JAN-2013 23:57:00 20130109 TST APGNOT   TYAPL.FOR     all failed choice, good gain poor Pdif case
09-JAN-2013 23:57:00 20130109 TST HLPFIL   TYAPL.HLP     all failed choice

CHANGE.DOC entries:

14040.  January 1, 2013         VLANT                     Eric
14042.  January 3, 2013           TVFLG, SPFLG            Eric
14043.  January 7, 2013     SETJY, BPASS, CPASS               Eric
14044.  January 8, 2013       IMFIT, JMFIT              Eric
        Try to improve the wording in the explanation of the max and
        min deconvolved widths in the help files.  It is (-1, 0, 1) *
        errors not 0.7*error and over 27 different combinations.
        Moved nowhere.

14045.  January 9, 2013            TYAPL               Eric
        (1) Corrected code so that when it is asked to find gain
        solutions with the PGN or CLP modes it only examines the post
        gains so see if they are valid.  Previously it was looking at
        the PSUM and PDIF and TCAL to see if they were valid even
        though they were not going to be used in the gain and weight
        scales.
        (2) Added CUTOFF adverb.  If it is > 0, then read the SY table
        to see what fraction of the values by antenna, polarizations,
        and IF are valid.  If that fraction is < CUTOFF, then mark
        that antenna, polarization, and IF to be "skipped".  The SY
        table values are taken as 1.0 for that antenna, polarization,
        and IF and the data affected are passed through (changed
        perhaps by the SY values of second antenna but not the
        "skipped" one).  This would be used when the SY data appear to
        be invalid but the visibilities appear to be okay.  CALIB
        should then be able to find the gains and correct the
        visibilities accordingly.  The weights also get changed by
        CALIB solutions but will probably not be entirely correct.
        Moved nowhere.

14046.  January 9, 2013             SYCOP                Eric
        Added option which was really needed before.  OPTYPE now
        controls which polarizations are done as
           'R  ' average R, store in R, L unchanged
           'L  ' average L, store in L, R unchanged
           'R2L' average R, store in L, R unchanged
           'L2R' average L, store in R, L unchanged
           else  average R, store in R, average L, store in L
        Also added ANTENNAS to limit the operation.
        Moved nowhere.

14047.  January