[daip] CALIB broken?

[Andrew Biggs]

Hi Eric. The problem appears to be solved. I ran my script and it ran
without failures and the data look well calibrated.

Thanks,

Andy

On 27/02/2013 02:00, "Eric Greisen" <egreisen at nrao.edu> wrote:

>Andrew Biggs wrote:
>> Hi again Eric. It seems that the fix has partly worked. When I run CALIB
>> now, the solutions look fine, but I think that there might now be a
>> problem with CLCAL. If I try and apply the CL table created by CLCAL in
>> VPLOT (or any task I suspect) no data can be found i.e. "FOUND 0 POINTS:
>> NOT ENOUGH TO SELF-SCALE". As before, the first source is fine.
>> Interestingly, in running CLCAL, this appears to have screwed up the
>> original CL table as well, i.e. the one given in GAINVER.
>> 
>> I see this with the same data that I sent you and the symptom was that
>> BPASS failed because it couldn't find any data on the phase calibrator.
>>I
>> do the calibration with a runfile so human error should be minimised.
>>This
>> runs fine with 31DEC12, but fails with 31DEC13 in the way I describe.
>
>My fix caused it to fail when the first CL table records were not on a
>desired source.
>
>Sigh...
>
>MNJ tonight.
>
>Thanks
>
>ERic Greisen