[daip] New Client Reply - [!XUU-482248]: FRING window limits
Adam T Deller
do-not-reply at nrao.edu
Wed Nov 16 12:57:17 EST 2011
New Client Reply: FRING window limits
Hi Eric,
Here is a dump of all of the adverbs (I think it is aparm(5) = 1 that triggers the problem - it runs ok with aparm(5) = 3, so I assume the limit is 16k channels). The error message is at the end.
AIPS 1: FRING: Task to fringe fit data
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: Input uv data.
AIPS 1: INNAME 'PULSE1' UV file name (name)
AIPS 1: INCLASS 'UVDATA' UV file name (class)
AIPS 1: INSEQ 1 UV file name (seq. #)
AIPS 1: INDISK 1 UV file disk drive #
AIPS 1: Data selection (multisource):
AIPS 1: CALSOUR *all ' ' Calibrator sources
AIPS 1: QUAL -1 Calibrator qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: TIMERANG *all 0 Time range to use.
AIPS 1: BCHAN 1 Lowest channel number 0=>all
AIPS 1: ECHAN 0 Highest channel number
AIPS 1: CHINC 0 Spectral channel increment
AIPS 1: (data are averaged)
AIPS 1: ANTENNAS *all 0 Antennas to select. 0=all
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: DOFIT *all 0 Subset of ANTENNAS list
AIPS 1: for which solns are desired.
AIPS 1: SUBARRAY 0 Subarray, 0=>all
AIPS 1: UVRANGE 0 0 Range of uv distance for full
AIPS 1: weight
AIPS 1: WTUV 0 Weight outside UVRANGE 0=0.
AIPS 1: WEIGHTIT 0 Modify data weights function
AIPS 1:
AIPS 1: Cal. info for input:
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 2 CL table to apply.
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: PDVER 1 PD table to apply (DOPOL>0)
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 1 Flag table version
AIPS 1: DOBAND 0 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER 0 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: HELP SMOOTH for details.
AIPS 1:
AIPS 1: CLEAN map (optional)
AIPS 1: IN2NAME ' ' Cleaned map name (name)
AIPS 1: IN2CLASS ' ' Cleaned map name (class)
AIPS 1: IN2SEQ 1 Cleaned map name (seq. #)
AIPS 1: IN2DISK 1 Cleaned map disk unit #
AIPS 1: INVERS 2 CC file version #.
AIPS 1: NCOMP *all 0 # comps to use for model.
AIPS 1: 1 value per field
AIPS 1: FLUX 0 Lowest CC component used.
AIPS 1: NMAPS 0 No. Clean map files
AIPS 1: CMETHOD ' ' Modeling method:
AIPS 1: 'DFT','GRID',' '
AIPS 1: CMODEL ' ' Model type: 'COMP','IMAG'
AIPS 1: 'SUBI' (see HELP re images)
AIPS 1: SMODEL *all 0 Source model, 1=flux,2=x,3=y
AIPS 1: See HELP SMODEL for models.
AIPS 1:
AIPS 1: Output uv data file.
AIPS 1: OUTNAME 'PULSE1' UV file name (name)
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: OUTCLASS 'UVDATA' UV file name (class)
AIPS 1: OUTSEQ 1 UV file name (seq. #)
AIPS 1: OUTDISK 1 UV file disk drive #
AIPS 1:
AIPS 1: Solution control adverbs:
AIPS 1: REFANT 4 Reference antenna
AIPS 1: SEARCH *all 0 Prioritized reference antenna
AIPS 1: list - supplements REFANT
AIPS 1: - but only if APARM(9)>0
AIPS 1: SOLINT 5.000E-04 Solution interval (min)
AIPS 1: 0 => 10 min
AIPS 1: SOLSUB 0 Solution subinterval
AIPS 1: SOLMIN 0 Min solution interval
AIPS 1:
AIPS 1: APARM 3 0 General parameters
AIPS 1: 0 0 1=min. no. antennas
AIPS 1: 1 2 2 > 0 => data divided
AIPS 1: 6.5 0 3 > 0 => avg. RR,LL
AIPS 1: 1 0 4 > 0 => avg. freq. in IFs
AIPS 1: 5 = 1 => combine all IFs
AIPS 1: = 2 => also MB delay
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: = 3 => combine IFs in
AIPS 1: halves
AIPS 1: 6=print level, 1=some
AIPS 1: 7=SNR cutoff (0=>5)
AIPS 1: 8=max. ant. # (no AN)
AIPS 1: 9 > 0 => do exhaustive
AIPS 1: baseline search
AIPS 1: DPARM 0 0 Delay-rate parameters
AIPS 1: 0.01 0 1=no. bl combo. (def=3)
AIPS 1: 0 0 2=delay win (nsec), if <0
AIPS 1: 0 0 no delay search done
AIPS 1: 1 0 3=rate win (mHz)
AIPS 1: 4=int. time (sec)
AIPS 1: 0 => min. found in data
AIPS 1: 5 >0 => don't do ls. soln
AIPS 1: 6 >0 => don't avg. in freq
AIPS 1: 7 >0 => don't rereference
AIPS 1: phase
AIPS 1: 8 > 0 => activate zero'ing
AIPS 1: options
AIPS 1: 9 > 0 => do not fit rate
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: SNVER 1 Output SN table, 0=>new table
AIPS 1: ANTWT *all 0 Ant. weights (0=>1.0)
AIPS 1: BADDISK *all 0 Disk no. not to use for
AIPS 1: scratch files.
FRING1: Task FRING (release of 31DEC11) begins
FRING1: Set integration time to 2.560000 seconds, hope that is ok
FRING1: UVGET: Using flag table version 1 to edit data
FRING1: Selecting and editing the data
FRING1: Dividing data by source flux densities
FRING1: Determining solutions
FRING1: Writing SN table 1
FRING1: Time= 0/ 13 47 36, Polarization = 1
FRING1: QINIT: did a GET of 5120 Kwords, OFF 14962973
FRING1: FRNALL: MEMORY TOO SMALL FOR SPECIFIED FFT SEARCH
FRING1: REDUCE DELAY AND/OR RATE WINDOW OR AVERAGE IN
FRING1: FREQUENCY OR USE A SHORTER SOLINT
FRING1: Purports to die of UNNATURAL causes
Cheers,
Adam
Ticket Details
===================
Ticket ID: XUU-482248
Department: AIPS Data Processing
Priority: Default
Status: Open
Link: https://help.nrao.edu/staff/index.php?_m=tickets&_a=viewticket&ticketid=1265
More information about the Daip
mailing list