[daip] 31DEC10 LINUX midnite job (dave, 20110118.183147)
aipsmgr at nrao.edu
aipsmgr at nrao.edu
Tue Jan 18 13:32:20 EST 2011
dave update report for 31DEC10 on Tue Jan 18 18:32:19 UTC 2011 (UT)
Copies and compiles:
AIPSUPD - Using CVS for copying files.
UPDCVS - cvs copy of 31DEC10 begun, 1st character means
- U added, P updated, M your file differs from master
- C you have a changed file needing work (error!)
- ? you have a file not on the master (ignore)
? 31DEC10/ERRORS
? 31DEC10/APL/DEV/UNIX/ZCREA2.C.save
? 31DEC10/LNX64/SYSTEM/RSYNC.MASTER
U 31DEC10/TIMESTAMP
P 31DEC10/APL/PGM/NOTST/DBCON.FOR
P 31DEC10/APL/PGM/NOTST/UVCOP.FOR
P 31DEC10/HIST/CHANGE.DOC
P 31DEC10/UPDATE/COMLNK.UPD
U 31DEC10/UPDATE/COMLNK.UPD.SUM
U 31DEC10/UPDATE/LASTCVS.DAT
P 31DEC10/UPDATE/PUTBCK.UPD
U 31DEC10/UPDATE/PUTBCK.UPD.SUM
P 31DEC10/UPDATE/REASONS.UPD
U 31DEC10/UPDATE/REASONS.UPD.SUM
UPDCVS - cvs update of 31DEC10 completed
UPDCVS - cvs update of TEXT completed
AIPSUPD - UPDCVS apparently worked
UPDCONTROL - /home/AIPS/31DEC10/LINUX/UPDATE/LASTREMOVE.DAT = 20110106.172138
UPDCONTROL - /home/AIPS/31DEC10/LINUX/UPDATE/LASTCOPY.DAT = 20110106.172138
UPDCONTROL - /home/AIPS/31DEC10/LINUX/UPDATE/LASTCOMRPL.DAT = 20110106.172138
UPDCONTROL - /home/AIPS/31DEC10/LINUX/UPDATE/LASTCOMLNK.DAT = 20110106.172138
UPDCONTROL - Everything seems in order
UPDCOMRPL: COMRPLs
UPDCOMRPL: currently in /home/AIPS/31DEC10/LINUX/UPDATE
UPDCOMLNK: COMLNKs
18-JAN-2011 17:38:51 20110118 NEW APGNOT DBCON.FOR egreisen
18-JAN-2011 17:35:53 20110118 NEW APGNOT UVCOP.FOR egreisen
UPDCOMLNK: currently in /home/AIPS/31DEC10/LINUX/UPDATE
UPDCOMLNK: /home/AIPS/31DEC10/APL/PGM/NOTST/DBCON.FOR
UPDCOMLNK: /home/AIPS/31DEC10/APL/PGM/NOTST/UVCOP.FOR
UPDCONTROL - Reasons for file updates on Tue Jan 18 18:32:05 UTC 2011 (UT)
18-JAN-2011 17:35:43 20110118 NEW APGNOT UVCOP.FOR source needs all 16 chars
18-JAN-2011 17:38:39 20110118 NEW APGNOT DBCON.FOR defend bad table headers
18-JAN-2011 17:38:40 20110118 NEW HIST CHANGE.DOC dbcon, uvcop
CHANGE.DOC entries:
; Copyright (C) 2010-2011
Changes while 31DEC11 is TST
< Changed formats inside to allow for sizes 33 inches.
< OPCODE 'WTUV' =do CLIP and check reasonable weights with
< Found a HI write line where DATAOUT 33 characters caused a
< Made code to plot scan breaks in the data. APARM(8) 0.
< over type of smoothing and to ignore pts n sigma in
< smoothing. Added flagging of weights < or set limits.
< antenna-based weights one. If APARM(1) 0, then find weights
< and Real/Imag 1.5 in the HI file along with all adverbs.
< counters to separate Real/Imag 1.5 from Imag/REal >
< than 0 and 0.0 will be used iff SPECINDX < -5 or +5.
< ordinary polynomials with DPARM(i) 0.
< 4. Add SPECTRAL to say (0) to do a channel-dependent antenna
13339. December 1, 2010 Code rollover Eric
< UVGET Clear dynamic memory if DOPOL 0 and PDVER>0.
< weight is multiplied by this change in rms. If APARM(9) 0,
< The fully translated name could easily be 48 characters.
PUVD.INC 32768 -> 65536 for MAXCIF, MAXCHA
5000 -> 25000 for XCTBSZ
PMAD.INC 32768 -> 65536 for MAXIMG
ZPBUFSZ 32768 -> 65536, 6*256 -> 12*256
QRFFT 8192 -> MAXIMG/4
QXFOUR 32768 -> MAXIMG, 8192 -> MAXIMG/4
APLSUB GETRLS.FOR 31DEC10 -> 31DEC11
INSUNIX INSTEP1 31DEC11
SYSPERL install.pl 31DEC11
SYSPERL update.pl 31DEC11
SYSPERL ZXHLP2.PL 31DEC11
SYSPERL LaCook.PL 31DEC11
UPDUNIX UPDCONTROL 31DEC11
SYSUNIX AIPSPATH.CSH 31DEC11
SYSUNIX AIPSPATH.SH 31DEC11
13340. December 1, 2010 RMSD Eric
The MACPPC compiler cannot handle a parameter that involves >
1 math operation. Thus PARAMETER (A = B*B/32) does not work
whilst PARAMETER (A = (B)*(B/32)) does.
Moved to 31DEC10 this date.
13341. December 3, 2010 VLA.GAINS Eric
The last Q band data added had a last good date of 20110101
while the last good date for other bands is 21000101. Fixed
the Q band date since we have no new/better info.
Moved nowhere - goes to all versions automatically.
13342. December 3, 2010 VBGLU Eric
< FLAGVER adverb: 0 -do nothing. One must specify the desired
< DOCRT 0 is supposed to trigger CRT printing and an
< requiring it to be 0.5 or they would resume AIPS. Some of
< SNPLT OPTYPE PSPD -PSYS and plots Tsys =
1. Compatibility tests to say what is incompatible
2. Sort order tests to allow 'Tx' to match 'Ty'
3. HI writing to write up to 4 input file names
Moved nowhere - could go to 10.
13343. December 3, 2010 UVFLG Eric
Test for EIF > 0 but EIF < BIF and also BCHAN, ECHAN -
treat as error.
13344. December 3, 2010 TIORD Eric
Added test on baseline order. Also help file.
< E UVAVG OPCODE, POSSM 0 -vector now
A badly type If statement caused a computation of difference
13346. December 6, 2010 IMAGR Eric
Made a change to the formula for FACTOR used with the
multi-scale options. The old formula could blow up and so
would have been hard to use. Changed IMAGR.HLP and QCLEAN.
Moved nowhere.
13348. December 7, 2010 SNPLT Leonia
Add print (at the plot header) the ploting tone number,
if the table is PC.
Moved nowhere.
13349. December 7, 2010 VLAPROCS, VLATECR aMY
13351. December 8, 2010 NORMALIZ gain Eric
Changed POPSDAT, NEWPARMS to add adverb NORMALIZ. It replaces
CPARM(2) in CALIB to control gain normalization. Added it to
CLSMO and SNSMO to forbid, allow, or require global gain
normalization after smoothing. Previously, these too did a
global normalization if the previous table had a non-1.0
normalization only ("allow" in above terms).
Changed LISTR to apply the global normalization to lists of
gains.
Moved nowhere, LISTR change moved to 31DEC10 January 3, 2011.
13353. December 13, 2010 TYSMO Eric
Moved to 31DEC10 December 10.
13354. December 13, 2010 TYSMO Eric
Added FLAGVER adverb and subroutine to apply FG tables to TY
or SY data. This does the flagging before the clipping and
smoothing operations, removing known bad periods before these
other operations. Flags that depend on baseline rather than
antenna or that depend on spectral channel are ignored.
Moved nowhere.
13355. December 15, 2010 CookBook Eric
Updated:
4 Added LOAD NEXT to TVFLG section Put in a modern TVFLG
figure.
E Corrected SY section - Tsys rather than Tsys/Tcal is now
used by SNEDT, EDITA, SNPLT, TYSMO. Added remarks about
applying the FG table with SNEDT (in 31DEC10) or TYSMO (in
31DEC11).
All - changed the figure inclusion macro to specify the size
of the figures (for html jpeg usage) and changed chapters
0,1,4,5,6,7,8,9,10,A,D,E to use the macro. Note that the pdf
macro package does not specify the size (when one does the
correct size is allocated but no picture appears).
Moved nowhere.
13356. December 16, 2010 TVFLG Eric
Changed option LOAD NEXT CH/IF/ST to LOAD NEXT IF/ST since
LOAD NEXT CHAN is already there. Now it increments IF only
and when that rolls over swaps the polariztion. Also changed
the spacing of the bottom messages and added code to make the
image start just above the bottom status lines (plus wedge and
wedge label) if it is small enough. Corrected the TVFLG help
file and HLPTVFLG.HLP, the run-time help file.
Made the spacing changes to SPFLG as well.
Moved nowhere.
Moved to 31DEC10 on 28 Dec.
13358. December 16, 2010 REWGT Eric
NEW TASK: version of REAMP that scales weights only.
Moved nowhere.
13359. December 22, 2010 TVFLG, SPFLG Eric
The change made Dec 16 to move the grey-scale down the screen
meant that the center of the screen might have no image. The
catalog header reads assumed that it would always have one.
Added parameter YCENTR to tell where to make the catalog reads
and had the TV loading set YCENTR.
Moved nowhere - bug not in 31DEC10.
The new TRAROW algorithm to figure out number of planes did
13362. December 27, 2010 SPLIT Eric
Copied the PD tables - should not do that.
Moved nowhere.
13363. December 27, 2010 UVFLG Eric
Add adverbs QUAL and CALCODE which modify SOURCES except when
UFLG and SOURCES='-'. They even modify the flags read in from
INTEXT files.
moved nowhere.
13364. December 27, 2010 EDITA, EDITR, SNEDT Eric
Changed NEXT CORRELATOR to NEXT POL/IF since users did not
know what I mean by correlator. Includes help files and
7 real time help files.
Moved nowhere.
13365. December 27, 2010 RSPEC Eric
Added option to write out a signal-to-noise image.
Moved nowhere.
13369. December 29, 2010 DBCON Eric
Changed it to copy and append SN tables also. Changed it to
do all versions of tables in appending with a warning. Thus
vers 2 in file 2 is appended to vers 2 in file 1, vers 3 in
file 2 is appended to vers 3 in file 1, etc.
Moved nowhere - do not move this one.
13370. December 30, 2010 AIPSLetter Eric
Put back LET10B in TEX, PS, PDF in $AIPSPUBL.
Moved nowhere.
Added calls to make an index table on the fly and dropped the
initial suggestion to use INDXR afterwards. Added CALCODE to
the tests of how to renumber sources - it was losing some of
the distinctions that the EVLA has put in.
13374. December 31, 2010 ELINT Eric
With large numbers pf sources and large numbers of IFs, the
limit of 1000 for history cards could be exceeded perhaps.
Changed code to allow 2000 and to test for the limit before
adding more history cards.
Moved nowhere.
An array was dimensions MAXANT and was used as if MXBASE which
and so messed up the listing.
13377. January 4, 2011 SY2TY Eric
Created new task to do the Tsys computation from an EVLA SY
plus CD table, writing a TY table. These may be useful for
diagnostics but will not help in calibrating the EVLA. The
raw "visibilities" from the BDF are not even normalized
correlation coefficients so the gain calibration is not a
scaling by Tsys.
Moved nowhere.
13378. January 5, 2011 UVFND Eric
Added adverbs QUAL, CALCODE, ANTENNAS, BASELINE to limit which
data are tested.
Moved nowhere.
13379. January 5, 2011 AIPS Eric
Updated Copyleft in AIPS.FOR.
Moved nowhere.
13381. January 6-7, 2011 LaCookE Eric
It did not describe RLDLY correctly - CLCAL is not required
after running it. PCAL no longer needs to be run after RLDIF
which now correctes the PD table properly.
Moved nowhere.
13382. January 7, 2010 FRING Eric
1. FRQTAB needs to do all frequency computation in double
precision. With a small increment and large center frequency
the resulting list was not accurate enough for FRING.
2. FRING failed to test after QINIT that it got all the memory
it wanted. Added tests and messages about SETMAXAP.
Moved nowhere.
13383. January 7, 2010 CALIB Eric
Changed CPARM(2) to signal a desire for a median rather than a
mean gain modulus to be used in normalizing the gains. Our
new median routine is rather fast so, although this forces a
further read of the SN table, it may be preferable to avoid
really bad solutions from dragging the mean away from a
desirable value.
Moved nowhere.
13384. January
More information about the Daip
mailing list