[daip] FILLM error
Yoshiaki Hagiwara
yoshiaki.hagiwara at nao.ac.jp
Mon Sep 29 06:59:26 EDT 2008
Dear Aips people,
I have trouble with reading the VLA archived data (AT322), that
were jsut downloaded from VLA site a few min ago.
The data are in the ../AIPS/FITS, so I specified
INFILE to be 'FITS:AT322_1 but AIPS complains
he cannot find the file of "FITS:AT322_11"
I input "AT322_1" as INFILE but system does
recognizes as AT322_11".
Why '1' is appended to the end of the file name?
[hagiwara at mizuho]# pwd
/home/hagiwara/AIPS/FITS
[hagiwara at mizuho]# ls AT*
AT322_1 AT322_A060302.xp1
Thanks.
Cheers,
Hagi
NAOJ, Mitaka
Error messages:
ocalh> FILLM1: Task FILLM (release of 31DEC03) begins
localh> FILLM1: Shadow flag limit = 2.500E+01 meters.
localh> FILLM1: Opacity correction in CL table weighted average of
weather and
localh> FILLM1: season. Weight for weather = 0.00
localh> FILLM1: Gain curve correction in CL table read from file,
localh> FILLM1: with variation as function of antenna and band.
localh> FILLM1: Opening FITS:AT322_11
localh> FILLM1: ZTPOPN: DISK DEVICE = FITS:AT322_11 NOT FOUND
localh> FILLM1: FLDKIO: ERROR 2 OPENING FILE
localh> FILLM1: Error 8 opening VLA archive data disk file.
localh> FILLM1: FLMUV: FLMDAT error 8
localh> FILLM1: Read 0 visibilities from 0 files
localh> FILLM1: Appears to have ended successfully
localh> FILLM1: localhost 31DEC03 TST: Cpu= 0.0 Real=
FILLM inputs:
FILLM Task to read a VLA archive tape
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: INTAPE 0 Tape drive number
AIPS 1: INFILE 'FITS:AT322_1 '
AIPS 1: Non-blank: disk file name
AIPS 1: NFILES 0 Number of files to advance
AIPS 1: Also applies to ON-LINE!
AIPS 1: BAND ' ' Freq. band (4,P,L,C,X,U,K,Q)
AIPS 1: QUAL -1 Source qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code
AIPS 1: VLAOBS ' ' VLA obs. pgm. name ('AZ99')
AIPS 1: VLAMODE ' ' VLA obs. mode (' '=any)
AIPS 1: REFDATE ' ' Reference date. 'yyyymmdd'
AIPS 1: TIMERANG *all 0 Timerange selected
AIPS 1: BCHAN 0 First spectral channel
AIPS 1: ECHAN 0 Highest spectral channel
AIPS 1: OUTNAME ' ' Output UV file name (name)
AIPS 1: OUTSEQ 0 Output UV file name (seq. #)
AIPS 1: OUTDISK 4 Output UV file disk unit #.
AIPS 1: DOUVCOMP -1 1 (T) => compressed data
AIPS 1: DOALL -1 1 (T) => write all data.
AIPS 1: DOCONCAT -1 1 (T) => append data to old
AIPS 1: files
AIPS 1: NCOUNT 0 Number of files to read
AIPS 1: DOWEIGHT 1 Use nominal sensitivity to
AIPS 1: scale weights?
AIPS 1: = 10, use Memo 108 weights
AIPS 1: DOACOR -1 Load autocorrelation data?
AIPS 1: CPARM 0 0 User options.
AIPS 1: 0 0 1 => Avg. time (seconds)
AIPS 1: 0 0 2 => bitmap (see help)
AIPS 1: 0 0.05 = 16 for planets & Sun
AIPS 1: 0 0 3 => Max. OK IF status
AIPS 1: <=3 => 3
AIPS 1: 4 => Control dropping of
AIPS 1: shadowed data
AIPS 1: < 0 => no shadow check
AIPS 1: 0 => 25 m limit
AIPS 1: > 0 => Shadow limit is
AIPS 1: CPARM(4) in meters
AIPS 1: 5 = channel code (see HELP)
AIPS 1: 6 => Subarray number-see HELP
AIPS 1: 7 => FQ entry tolerance (kHz)
AIPS 1: (see HELP)
AIPS 1: 8 => CL table time incr. min
AIPS 1: 9 => TY table time incr. min
AIPS 1: 10=> Calibrator avg. time
AIPS 1: DPARM *all 0 Selection by Frequency
AIPS 1: 1+2 => A Frequency (Hz)
AIPS 1: 3+4 => B Frequency (Hz)
AIPS 1: 5+6 => C Frequency (Hz)
AIPS 1: 7+8 => D Frequency (Hz)
AIPS 1: 9 => tolerance for A&C
AIPS 1: 10 => tolerance for B&D
AIPS 1: BPARM 20 1 Opacity and Gain curve
AIPS 1: *rest 0 control (see help)
AIPS 1: IN2FILE ' '
More information about the Daip
mailing list