[daip] 31DEC08 LINUX midnite job (dave, 20080925.034441)
aipsmgr at nrao.edu
aipsmgr at nrao.edu
Wed Sep 24 23:47:51 EDT 2008
dave update report for 31DEC08 on Thu Sep 25 03:47:51 UTC 2008 (UT)
Copies and compiles:
AIPSUPD - Using CVS for copying files.
UPDCVS - cvs copy of 31DEC08 begun, 1st character means
- U added, P updated, M your file differs from master
- C you have a changed file needing work (error!)
- ? you have a file not on the master (ignore)
? 31DEC08/ERRORS
U 31DEC08/TIMESTAMP
P 31DEC08/AIPS/SUB/AU3.FOR
U 31DEC08/HELP/FSIZE.HLP
P 31DEC08/HELP/LSAPROPO.HLP
P 31DEC08/HELP/POPSDAT.HLP
P 31DEC08/HELP/SETMAXAP.HLP
U 31DEC08/HELP/SIZEFILE.HLP
P 31DEC08/HIST/CHANGE.DOC
P 31DEC08/Q/SUB/OOP/QCLEAN.FOR
P 31DEC08/RUN/NEWPARMS.001
P 31DEC08/UPDATE/COMLNK.UPD
U 31DEC08/UPDATE/COMLNK.UPD.SUM
P 31DEC08/UPDATE/COMRPL.UPD
U 31DEC08/UPDATE/COMRPL.UPD.SUM
U 31DEC08/UPDATE/LASTCVS.DAT
P 31DEC08/UPDATE/PUTBCK.UPD
U 31DEC08/UPDATE/PUTBCK.UPD.SUM
P 31DEC08/UPDATE/REASONS.UPD
U 31DEC08/UPDATE/REASONS.UPD.SUM
P 31DEC08/UPDATE/WHATISOUT.UPD
U 31DEC08/UPDATE/WHATISOUT.UPD.SUM
UPDCVS - cvs update of 31DEC08 completed
UPDCVS - cvs update of TEXT completed
AIPSUPD - UPDCVS apparently worked
UPDCONTROL - /home/AIPS/31DEC08/LINUX/UPDATE/LASTREMOVE.DAT = 20080924.034312
UPDCONTROL - /home/AIPS/31DEC08/LINUX/UPDATE/LASTCOPY.DAT = 20080924.034312
UPDCONTROL - /home/AIPS/31DEC08/LINUX/UPDATE/LASTCOMRPL.DAT = 20080924.034312
UPDCONTROL - /home/AIPS/31DEC08/LINUX/UPDATE/LASTCOMLNK.DAT = 20080924.034312
UPDCONTROL - Everything seems in order
UPDUPDATE - running POPSGN for changed POPSDAT
Data disk assignments:
(Using COAOARN-specific default file /home/AIPS/DA00/DADEVS.LIST.COAOARN for DADEVS.PL)
Disk 1 (1) is /home/AIPS/DATA/DAVE_1
Starting up POPSGN (RELEASE OF 31DEC08)
Enter Idebug, Mname, Version (1 I, 2 A's) (NO COMMAS)
POPSG1: Popsgen complete
POPSG1: dave 31DEC08 TST: Cpu= 0.0 Real= 0 IO= 1
>
UPDCOMRPL: COMRPLs
24-SEP-2008 22:18:25 20080924 TST AIPSUB AU3.FOR egreisen
24-SEP-2008 22:18:27 20080924 TST QOOP QCLEAN.FOR egreisen
UPDCOMRPL: currently in /home/AIPS/31DEC08/LINUX/UPDATE
UPDCOMRPL: /home/AIPS/31DEC08/AIPS/SUB/AU3.FOR
UPDCOMRPL: /home/AIPS/31DEC08/Q/SUB/OOP/QCLEAN.FOR
UPDCOMLNK: COMLNKs
24-SEP-2008 22:20:58 20080924 TST AIPPGM AIPS.FOR egreisen
24-SEP-2008 22:20:55 20080924 TST AIPPGM AIPSB.FOR egreisen
24-SEP-2008 22:20:57 20080924 TST AIPPGM AIPSC.FOR egreisen
24-SEP-2008 22:21:08 20080924 TST QPGOOP IMAGR.FOR egreisen
24-SEP-2008 22:21:15 20080924 TST QPGOOP SCIMG.FOR egreisen
24-SEP-2008 22:21:20 20080924 TST QPGOOP SCMAP.FOR egreisen
UPDCOMLNK: currently in /home/AIPS/31DEC08/LINUX/UPDATE
UPDCOMLNK: /home/AIPS/31DEC08/AIPS/PGM/AIPS.FOR
UPDCOMLNK: /home/AIPS/31DEC08/AIPS/PGM/AIPSB.FOR
UPDCOMLNK: /home/AIPS/31DEC08/AIPS/PGM/AIPSC.FOR
UPDCOMLNK: /home/AIPS/31DEC08/Q/PGM/OOP/IMAGR.FOR
UPDCOMLNK: /home/AIPS/31DEC08/Q/PGM/OOP/SCIMG.FOR
UPDCOMLNK: /home/AIPS/31DEC08/Q/PGM/OOP/SCMAP.FOR
UPDCONTROL - Reasons for file updates on Thu Sep 25 03:44:55 UTC 2008 (UT)
24-SEP-2008 22:17:25 20080924 TST HLPFIL SETMAXAP.HLP file size info and discussion
24-SEP-2008 22:17:31 20080924 TST HLPFIL SIZEFILE.HLP new verb
24-SEP-2008 22:17:37 20080924 TST HLPFIL FSIZE.HLP new adverb
24-SEP-2008 22:17:38 20080924 TST HLPFIL POPSDAT.HLP file size verb
24-SEP-2008 22:17:41 20080924 TST RUNSYS NEWPARMS.001 file size verb
24-SEP-2008 22:17:56 20080924 TST HIST CHANGE.DOC imagr
24-SEP-2008 22:18:16 20080924 TST AIPSUB AU3.FOR SIZEFILE
24-SEP-2008 22:18:19 20080924 TST QOOP QCLEAN.FOR restore the forgiveness margin
CHANGE.DOC entries:
12712. September 23, 2008 IMAGR Eric
Develop the ability to grid multiple facets at one time and
then take advantage of that in IMAGR. Changed
UTILITY Added OBFSIZ to return the size of the disk file
attached to an object. Used to decide if the UV
work file is large or if the OS will hold it in
memory.
BEMFIT New: fits elliptical Gaussian to beam image known
in imaging commons. Called by IMGMEM, needed to
make call before extended resolution "beam" writes
over the normal tapered beam.
QNGRD New: A version of Q1GRD but it must move data from
protected area to work area, do the 3x3 matrix
multiply on u,v,w to rotate to the new facet phase
center, check/fix for rotated U negative, and
check/blank when rotated u,v outside image as well
as the taper, freq adjust etc done in Q1GRD.
Q1FIN Cleaned up typing while correcting error. It
tested for the symmetric row being below the
address of the X convolving function rather than
below the start of the grid. Fortunately, this
test never has anything to do.
IMGMEM New call sequence to give a list of fields to
image this time including their tapers. Now loops
over field to prepare gridding parameters, then
calls GRDMEM to grid all request fields, then
loops over fields to do FFT and grid correct and
beam fit if appropriate.
GRDMEM New call sequence to pass in a list of fields and
tapers and send bak lists of GRID addresses, max Y
row used, and sum of weights. Now loops over
fields to init parameters and set grid addresses.
Then loops through data filling data buffers into
the AP and, when needed, looping over fields to
grid the data now in AP to the fields. Finally,
loops over fields with zero spacing and finishing
operations.
GRCMEM New call sequence to pass in the scaling parameter
rather than depend on common variable BEMMAX(field).
GRDFIT New gridding routine reuires 2 copies of data and
it was noted that data come in blocks of the buffer
size rather than simply the logical record size
when moved to the AP by GRDMEM.
QUVUTIL OUVIMG: change call sequence meaning to allow
IFIELD to be optionally a forced list of fields
in addittion to a single number or 0 => all. Sum
total memory needed as well as max for 1 image.
Decide FAST (=> IMGMEM) based on largest single
image but ask for AP memory enough to do
everything. Call GRDFIT and sort only if not
FAST. Break the DOBEAM and not DOBEAM segments
into not FAST (MAKMAP essentially unchanged) and
FAST segments. In the latter, make a list of the
fields that will fit at the moment and call IMGMEM
with that list. Manually loop for the next list if
any. In the image FAST section, break it into 2
parts one of which does consecutive field numbers
and the other of which supports the forced list.
QCLEAN CLNUV2: Put in code at start to decide how many
facets (MXLIST) to image each time we look for the
next strongest. Large work file => want more, big
images prevent more. Use list returned by CLBSTF -
if the top of the list has not been imaged lately,
image as much of the list as is not current and
then call CLBSTF to make a new list of apparently
most desirable facets. If the top of the list is
current, then clean that facet.
CLBSTF: changed to make an ordered list of
apparently desirable fields rather than returning
only one with a clue about the second.
CLORDR: new to insert a field in the ordered list
when appropriate.
Moved nowhere.
12713. September 23, 2008 model Amy/Eric
Putbck Amy's new model : 3C147 at C band.
Moved nowhere.
12714. September 24, 2008 IMAGR Eric
Fixed QCLEAN to remember the actual score for the top file
after re-imaging and if the apparent top score for the
next group is close, use the already re-imaged facet rather
than image more. This option has been present under control
of IMAGRPRM(20) for some time, but has been lost for 24 hours.
Moved nowhere.
12715. September 24, 2008 SIZEFILE Eric
New verb SIZEFILE and adverb FSIZE added to POPSDAT.HLP and
NEWPARMS.001. New help files written. Changed AU3 to
implement and added comments to SETMAXAP.HLP. Returns file
size in Mbytes, interpreted sometimes by BCHAN,ECHAN,BIF,EIF,
NCHAV, CHINC.
Moved nowhere.
12716. September
More information about the Daip
mailing list