[daip] APCAL
Amy Mioduszewski
amiodusz at nrao.edu
Tue Jul 29 12:55:53 EDT 2008
Hi Cormac,
The REAWX message is spurious, in your case it does not mean anything. I will
fix it today.
Amy
Cormac Reynolds wrote:
> hi Amy,
>
> the APCAL inputs were:
>
>> inp
> AIPS 1: APCAL Task to generate an amplitude calibration SN table
> AIPS 1: Adverbs Values Comments
> AIPS 1: ----------------------------------------------------------------
> AIPS 1: INNAME 'BP124A_K' Input UV file name (name)
> AIPS 1: INCLASS 'UVCOP' Input UV file name (class)
> AIPS 1: INSEQ 1 Input UV file name (seq. #)
> AIPS 1: INDISK 2 Input UV file disk unit #
> AIPS 1:
> AIPS 1: ANTENNAS *all 0 Antennas to calibrate
> AIPS 1: SUBARRAY 0 Subarray 0 -> 1
> AIPS 1: STOKES ' ' Stokes type ('R','L',' ')
> AIPS 1: BIF 0 Start IF number
> AIPS 1: EIF 0 End IF number
> AIPS 1: FREQID 0 Freq. ID to calibrate
> AIPS 1: SOURCES *all ' ' Sources to calibrate
> AIPS 1: TIMERANG *all 0 Time range to calibrate
> AIPS 1:
> AIPS 1: TYVER 1 TY table version number.
> AIPS 1: GCVER 1 GC table version number.
> AIPS 1: SNVER 0 Output SN table version.
> AIPS 1: 0 -> highest unique
> AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
> #
> AIPS 1: OPCODE 'GRID' Opacity correction opcode:
> AIPS 1: ' ' -> no opacity corr.
> AIPS 1: 'GRID','GRDR','OPAC','OPCR',
> AIPS 1: 'LESQ' -> fit for opacity
> AIPS 1: APARM *all 0 Calibration parameters:
> AIPS 1: (1) -> B factor (def. 1.0)
> AIPS 1: Opacity parameters:
> AIPS 1: (2) -> ZA limit (deg)
> AIPS 1: (3) >=0 use spillover
> AIPS 1: correction
> AIPS 1: (4) > 0 use all FQ in
> AIPS 1: opac. soln.
> AIPS 1: (5) Limit to sec(z) plotted
> AIPS 1: SOLINT 0 Solution interval (min)
> AIPS 1: 0 -> use all data
> AIPS 1: INVERS 0 WX table version number.
> AIPS 1: 0 -> use text file
> AIPS 1: INFILE 'PWD:out/bp124a.vlba.WX'Text file with weather info.
> AIPS 1: Must be ' ' if using WX
> AIPS 1: table (INVERS).
> AIPS 1: TRECVR *all 0 Receiver temperatures (K);
> AIPS 1: in (R,L) pairs.
> AIPS 1: TAU0 *all 0 Zenith opacities (per ant.)
> AIPS 1: DOFIT 1 1 Fit type (per ant.)
> AIPS 1: 1 1 -1 -> no opacity correction
> AIPS 1: 1 1 0 -> apply TRECVR only
> AIPS 1: 1 1 1 -> solve for Trec using
> AIPS 1: 1 1 fitting method spec.
> AIPS 1: 1 1 in OPCODE; then apply
> AIPS 1: 1 1 1 1
> AIPS 1: 1 1 1 1
> AIPS 1: 1 1 1 1
> AIPS 1: 1 1 1 1
> AIPS 1: 1 1
> AIPS 1: PRTLEV 0 Print level
> AIPS 1: DOTV 1 TV selection (<0 -> PL file)
> AIPS 1: LTYPE 3 Plot labeling
> AIPS 1: GRCHAN 0 TV Graphics channel to use
>
>
> and the output from APCAL was:
>
> unctio> APCAL1: Task APCAL (release of 31DEC08) begins
> unctio> APCAL1: ZTXOP2: using translated file name =
> unctio> APCAL1: ZTXOP2: /home/creynolds/data1/cormac/bp124/out/bp124a.vlba.WX
> unctio> APCAL1: 0 unidentified WX records skipped on input
> unctio> APCAL1: DFTAU: INITIAL TAU0 SET TO 0.052
> unctio> APCAL1: DFTRC:BR RCP Initial Trec set to = 66.80
> unctio> APCAL1: DFTRC:BR LCP Initial Trec set to = 64.70
> unctio> APCAL1: DFTRC:FD RCP Initial Trec set to = 65.45
> unctio> APCAL1: DFTRC:FD LCP Initial Trec set to = 72.25
> unctio> APCAL1: DFTRC:HN RCP Initial Trec set to = 70.48
> unctio> APCAL1: DFTRC:HN LCP Initial Trec set to = 86.48
> unctio> APCAL1: DFTRC:KP RCP Initial Trec set to = 54.11
> unctio> APCAL1: DFTRC:KP LCP Initial Trec set to = 58.71
> unctio> APCAL1: DFTRC:LA RCP Initial Trec set to = 68.62
> unctio> APCAL1: DFTRC:LA LCP Initial Trec set to = 64.22
> unctio> APCAL1: DFTRC:MK RCP Initial Trec set to = 129.05
> unctio> APCAL1: DFTRC:MK LCP Initial Trec set to = 156.75
> unctio> APCAL1: DFTRC:NL RCP Initial Trec set to = 86.15
> unctio> APCAL1: DFTRC:NL LCP Initial Trec set to = 90.55
> unctio> APCAL1: DFTRC:OV RCP Initial Trec set to = 56.51
> unctio> APCAL1: DFTRC:OV LCP Initial Trec set to = 67.61
> unctio> APCAL1: DFTRC:PT RCP Initial Trec set to = 68.59
> unctio> APCAL1: DFTRC:PT LCP Initial Trec set to = 76.89
> unctio> APCAL1: DFTRC:SC RCP Initial Trec set to = 81.14
> unctio> APCAL1: DFTRC:SC LCP Initial Trec set to = 86.14
> unctio> APCAL1: Writing SN table 3
> unctio> APCAL1: REAWX: *** NO TEMPS FOUND IN WX TABLE FOR ANT 1, LEFT AT 0 ***
> unctio> APCAL1: BR RCP 0/11h 2m Trec (K): 89.07 Zen. opac.: 0.002
> unctio> APCAL1: BR LCP 0/11h 2m Trec (K): 84.96 Zen. opac.: 0.009
> unctio> APCAL1: REAWX: *** NO TEMPS FOUND IN WX TABLE FOR ANT 2, LEFT AT 0 ***
> unctio> APCAL1: FD RCP 0/11h 2m Trec (K): 79.33 Zen. opac.: 0.007
> unctio> APCAL1: FD LCP 0/11h 2m Trec (K): 86.12 Zen. opac.: 0.005
> unctio> APCAL1: Waiting 30 seconds:
> unctio> APCAL1: Hit TV button A to pause indefinitely. Hit button
> unctio> APCAL1: B or C to continue sooner, button D to stop plotting
> unctio> APCAL1: Continuing
> unctio> APCAL1: REAWX: *** NO TEMPS FOUND IN WX TABLE FOR ANT 3, LEFT AT 0 ***
> unctio> APCAL1: HN RCP 0/11h 2m Trec (K): 79.73 Zen. opac.: 0.029
> unctio> APCAL1: HN LCP 0/11h 2m Trec (K): 97.83 Zen. opac.: 0.025
> unctio> APCAL1: REAWX: *** NO TEMPS FOUND IN WX TABLE FOR ANT 4, LEFT AT 0 ***
> unctio> APCAL1: KP RCP 0/11h 2m Trec (K): 65.59 Zen. opac.: 0.011
> unctio> APCAL1: KP LCP 0/11h 2m Trec (K): 71.17 Zen. opac.: 0.009
> unctio> APCAL1: Waiting 30 seconds:
> unctio> APCAL1: Hit TV button A to pause indefinitely. Hit button
> unctio> APCAL1: B or C to continue sooner, button D to stop plotting
> unctio> APCAL1: Continuing
> unctio> APCAL1: REAWX: *** NO TEMPS FOUND IN WX TABLE FOR ANT 5, LEFT AT 0 ***
> unctio> APCAL1: LA RCP 0/11h 2m Trec (K): 81.79 Zen. opac.: 0.020
> unctio> APCAL1: LA LCP 0/11h 2m Trec (K): 75.25 Zen. opac.: 0.024
> unctio> APCAL1: REAWX: *** NO TEMPS FOUND IN WX TABLE FOR ANT 6, LEFT AT 0 ***
> unctio> APCAL1: MK RCP 0/ 8h 0m Trec (K): 0.00 Zen. opac.: 0.000
> unctio> APCAL1: MK LCP 0/ 8h 0m Trec (K): 0.00 Zen. opac.: 0.000
> unctio> APCAL1: Waiting 30 seconds:
> unctio> APCAL1: Hit TV button A to pause indefinitely. Hit button
> unctio> APCAL1: B or C to continue sooner, button D to stop plotting
> unctio> APCAL1: Continuing
> unctio> APCAL1: REAWX: *** NO TEMPS FOUND IN WX TABLE FOR ANT 7, LEFT AT 0 ***
> unctio> APCAL1: NL RCP 0/11h 2m Trec (K): 80.06 Zen. opac.: 0.093
> unctio> APCAL1: NL LCP 0/11h 2m Trec (K): 96.96 Zen. opac.: 0.050
> unctio> APCAL1: REAWX: *** NO TEMPS FOUND IN WX TABLE FOR ANT 8, LEFT AT 0 ***
> unctio> APCAL1: OV RCP 0/11h 2m Trec (K): 74.21 Zen. opac.: 0.001
> unctio> APCAL1: OV LCP 0/11h 2m Trec (K): 86.05 Zen. opac.: 0.000
> unctio> APCAL1: Waiting 30 seconds:
> unctio> APCAL1: Hit TV button A to pause indefinitely. Hit button
> unctio> APCAL1: B or C to continue sooner, button D to stop plotting
> unctio> APCAL1: Continuing
> unctio> APCAL1: REAWX: *** NO TEMPS FOUND IN WX TABLE FOR ANT 9, LEFT AT 0 ***
> unctio> APCAL1: PT RCP 0/11h 2m Trec (K): 77.60 Zen. opac.: 0.020
> unctio> APCAL1: PT LCP 0/11h 2m Trec (K): 83.88 Zen. opac.: 0.031
> unctio> APCAL1: REAWX: *** NO TEMPS FOUND IN WX TABLE FOR ANT 10, LEFT AT 0 ***
> unctio> APCAL1: SC RCP 0/11h 2m Trec (K): 68.85 Zen. opac.: 0.103
> unctio> APCAL1: SC LCP 0/11h 2m Trec (K): 71.35 Zen. opac.: 0.103
> unctio> APCAL1: Waiting 30 seconds:
> unctio> APCAL1: Hit TV button A to pause indefinitely. Hit button
> unctio> APCAL1: B or C to continue sooner, button D to stop plotting
> unctio> APCAL1: Continuing
> unctio> APCAL1: *** At least one source had identically zero flux
> unctio> APCAL1: *** Usually this means you forgot to run SETJY.
> unctio> APCAL1: *** This may be important if you have a very
> unctio> APCAL1: *** bright source (masers?).
> unctio> APCAL1: Appears to have ended successfully
> unctio> APCAL1: unctious 31DEC08 TST: Cpu= 12.7 Real= 20 IO= 2
>
> 2008/7/28 Amy Mioduszewski <amiodusz at nrao.edu>:
>> Hi Cormac,
>>
>> Could you send me all your inputs and all the APCAL messages, it looks like
>> APCAL is reading the WX table, not your file (or maybe it is reading both).
>>
>> Cormac Reynolds wrote:
>>> 2008/7/24 Eric Greisen <egreisen at nrao.edu>:
>>>> Cormac Reynolds wrote:
>>>>> hi,
>>>>>
>>>>> I'm running APCAL on a 22 GHz data set, trying to solve for opacity.
>>>>> APCAL seems to work fine and the fits look o.k., but I get a warning
>>>>> for every antenna: ' REAWX: *** NO TEMPS FOUND IN WX TABLE FOR ANT
>>>>> 5, LEFT AT 0 ***'.
>>>>>
>>>>> These are VLBA data (BP124A), and I am using the external WX files, as
>>>>> produced by VLOG, rather than the attached table (which appears to be
>>>>> corrupted). The WX file looks fine, and no error message is reported
>>>>> when APCAL parses it. Should I be worried about this warning?
>>>> But "the WX table looks fine" do you mean that there are entries for
>>>> antenna
>>>> 5?
>>> yes, I have entries in the WX file for every antenna, and I get the
>>> warning above for every antenna (not just 5). The fits look o.k., so
>>> I'm not sure there is really any problem here, but I found the warning
>>> a little disconcerting, and wondered if it might be the cause of some
>>> small offsets in the fits that I see.
>>>
>>> cheers,
>>> Cormac.
>>>
>>>> Eric Greisen
>>>>
>>> _______________________________________________
>>> Daip mailing list
>>> Daip at listmgr.cv.nrao.edu
>>> http://listmgr.cv.nrao.edu/mailman/listinfo/daip
>>>
>
More information about the Daip
mailing list