[daip] Problem with AIPS
dbgob at brandeis.edu
dbgob at brandeis.edu
Fri Feb 29 15:57:44 EST 2008
Hello,
While working with observation AO0105 (combined Aug 11/12 1991) data,
AIPS is acting VERY strangely. I combined the data outside of AIPS as
I always do ( cat FILE_1 FILE_2 > FILE_3 ) and then began to work with
the L Band data. The phase calibrator 0742+103 works just fine
throughout, but there are problems with my source of choice, 0740+38.
I first noted the problem when I could make a uvplt with about 30000
points but a vplot would say there was a degenerate scaling issue.
Upon looking into this and finding no such errors, I reset (restore 0)
and now the uvplt gives me 70000 points and still no vplot possible. I
decided to continue on regardless and try to work with the data. I go
through the procedure at the bottom of this message and after ever
task I run, I cannot view the uvplt of 0740+38 until I do a restore 0.
What is going on?!?!?!
I have also attached the log of the procedures. Anything you find
would help a lot. Thanks.
~Doug Gobeille
clrmsg
restore 0
task 'fillm'
infile 'fits:BIG_'
indi 1
outseq 0; outdi 1; DOUVCOMP -1; DOALL 1
DOCONCAT 1; ncount 1; nfile 0
go;wait
infile ''
task 'listr'
docrt 132
optype 'scan'
go prtan
refant 25
getn 1
zap:wait
getn 2
task 'uvflg'
sour '0742+103''
anten 9
baseline 25
bif 1
eif 1
timer 00 21 02 50 00 21 03 00
go;wait
anten 0
baseline 0
timer 0
task 'uvplt'
dotv 1
go;wait
sour '0740+38''
go;wait
task 'setjy'
stokes ''
uvrange 0
timer 0
antenna 0
baseline 0
bif 1
eif 2
sour '0742+103''
zerosp 3.30 0 0 0
go;wait
task 'calib'
freq 1
aparm 0
aparm(6) 2
cparm 0
cparm(5) 1
solmode 'a&p'
minamper 10
minphser 10
calsour sour
go;wait
task 'clcal'
calcode ''
freq 1
opcode 'cali'
snver 0
interp '2pt'
gainver 1
gainuse 0
snver 1
go;wait
sour '0740+38''
go;wait
-------------- next part --------------
FILLM1: Task FILLM (release of 31DEC07) begins
FILLM1: ******************************************************
FILLM1: ** Times written by FILLM are now centered in **
FILLM1: ** the integration, before they were at the end **
FILLM1: ******************************************************
FILLM1: Shadow flag limit = 2.500E+01 meters.
FILLM1: Opacity correction in CL table weighted average of weather and
FILLM1: season. Weight for weather = 0.50
FILLM1: Gain curve correction in CL table read from file,
FILLM1: with variation as function of antenna and band.
FILLM1: Opening FITS:BIG_1
FILLM1: *** caution: CPARM(6) is 0 and VLAOBS is blank ***
FILLM1: ** subarray defaults to 1. It is recommended ***
FILLM1: *** to run FILLM with non-blank VLAOBS. ***
FILLM1: tape file # 1, start date/time = 19910811/20:56:20
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Program = AO105 ; Tape revision number = 24.
FILLM1: Create 19910811 .X BAND. 1 (UV) on disk 1 cno 1
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: FLMFQ: FQ entry tolerance = 1.000D+02 1.000D+02
FILLM1: Found 0742+103 : 0 50.000 MHz at IAT 0/ 20:56:15.0
FILLM1: Zenith opacity set to 0.010
FILLM1: Trying to access VLA antenna gains file...
FILLM1: ZTXOP2: using translated file name =
FILLM1: ZTXOP2: /home/aips/TEXT/IONS/VLA.GAINS
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Create 19910811 .L BAND. 1 (UV) on disk 1 cno 2
FILLM1: Ref. date = 19910811 A-C = 1.464900 B-D = 1.514900 GHz
FILLM1: Found 0742+103 : 0 50.000 MHz at IAT 0/ 21:01:45.0
AIPS 1: Resumes
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:05:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:14:45.0
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:18:15.0
FILLM1: Found 0742+318 : 0 50.000 MHz at IAT 0/ 21:25:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0740+38 : 0 50.000 MHz at IAT 0/ 21:39:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0751+298 : 0 50.000 MHz at IAT 0/ 21:49:25.0
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 22:04:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 22:07:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0802+10 : 0 50.000 MHz at IAT 0/ 22:10:25.0
FILLM1: Found 0824+29 : 0 50.000 MHz at IAT 0/ 22:20:15.0
FILLM1: Found 0858+29 : 0 50.000 MHz at IAT 0/ 22:44:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0858+29 : 0 50.000 MHz at IAT 0/ 22:49:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 0/ 22:56:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 0/ 23:00:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 23:04:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 23:11:05.0
FILLM1: Found 0906+43 : 0 50.000 MHz at IAT 0/ 23:13:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0906+43 : 0 50.000 MHz at IAT 0/ 23:21:05.0
FILLM1: Found 0850+581 : 0 50.000 MHz at IAT 0/ 23:31:25.0
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 0/ 23:55:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 1/ 00:07:35.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:17:45.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:21:15.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:21:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 00:32:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 00:41:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1148-001 : 0 50.000 MHz at IAT 1/ 00:53:55.0
FILLM1: Found 1217+02 : 0 50.000 MHz at IAT 1/ 00:58:15.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 01:24:15.0
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 1/ 01:27:55.0
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 01:40:25.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 01:50:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 01:55:15.0
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 02:00:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 02:06:15.0
FILLM1: Found 1350+31 : 0 50.000 MHz at IAT 1/ 02:11:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1350+31 : 0 50.000 MHz at IAT 1/ 02:15:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1144+402 : 0 50.000 MHz at IAT 1/ 02:20:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1144+402 : 0 50.000 MHz at IAT 1/ 02:24:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1150+497 : 0 50.000 MHz at IAT 1/ 02:28:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1143+50 : 0 50.000 MHz at IAT 1/ 02:53:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1143+50 : 0 50.000 MHz at IAT 1/ 03:02:45.0
FILLM1: Found 1203+64 : 0 50.000 MHz at IAT 1/ 03:12:55.0
FILLM1: Found 1216+487 : 0 50.000 MHz at IAT 1/ 03:18:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1216+487 : 0 50.000 MHz at IAT 1/ 03:22:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1254+47 : 0 50.000 MHz at IAT 1/ 03:25:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1254+47 : 0 50.000 MHz at IAT 1/ 03:39:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1258+40 : 0 50.000 MHz at IAT 1/ 03:48:05.0
FILLM1: Found 1317+52 : 0 50.000 MHz at IAT 1/ 04:16:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 04:45:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 04:52:35.0
FILLM1: Found 1419+41 : 0 50.000 MHz at IAT 1/ 04:57:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1419+41 : 0 50.000 MHz at IAT 1/ 05:06:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1416+06 : 0 50.000 MHz at IAT 1/ 05:17:05.0
FILLM1: Found 1532+016 : 0 50.000 MHz at IAT 1/ 05:26:55.0
FILLM1: Found 1540+18 : 0 50.000 MHz at IAT 1/ 05:34:45.0
FILLM1: Found 1641+17 : 0 50.000 MHz at IAT 1/ 05:56:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1641+17 : 0 50.000 MHz at IAT 1/ 06:10:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 06:22:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 06:28:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1323+65 : 0 50.000 MHz at IAT 1/ 06:33:15.0
FILLM1: Found 1345+584 : 0 50.000 MHz at IAT 1/ 06:52:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1345+584 : 0 50.000 MHz at IAT 1/ 07:07:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1347+539 : 0 50.000 MHz at IAT 1/ 07:17:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1347+539 : 0 50.000 MHz at IAT 1/ 07:32:05.0
FILLM1: Found 1358+624 : 0 50.000 MHz at IAT 1/ 07:42:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1358+624 : 0 50.000 MHz at IAT 1/ 07:46:55.0
FILLM1: Found 1443+77 : 0 50.000 MHz at IAT 1/ 07:50:15.0
FILLM1: Found 1447+77 : 0 50.000 MHz at IAT 1/ 07:54:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1447+77 : 0 50.000 MHz at IAT 1/ 07:59:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1458+71 : 0 50.000 MHz at IAT 1/ 08:09:35.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 08:15:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 08:22:15.0
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 08:26:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 08:38:15.0
FILLM1: Found 1857+56 : 0 50.000 MHz at IAT 1/ 08:53:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1828+48 : 0 50.000 MHz at IAT 1/ 09:07:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1828+48 : 0 50.000 MHz at IAT 1/ 09:19:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 09:32:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 09:43:35.0
FILLM1: Found 2037+51 : 0 50.000 MHz at IAT 1/ 09:58:45.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 10:14:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 10:21:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 10:25:35.0
FILLM1: Found 1857+56 : 0 50.000 MHz at IAT 1/ 10:40:35.0
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 10:55:15.0
FILLM1: Found 2037+51 : 0 50.000 MHz at IAT 1/ 11:10:15.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 11:25:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 11:32:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 2248+71 : 0 50.000 MHz at IAT 1/ 11:37:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 2252+12 : 0 50.000 MHz at IAT 1/ 11:43:15.0
FILLM1: Found 2223-05 : 0 50.000 MHz at IAT 1/ 11:51:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0017+15 : 0 50.000 MHz at IAT 1/ 11:59:25.0
FILLM1: Found 0037-01 : 0 50.000 MHz at IAT 1/ 12:11:35.0
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 12:26:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 12:29:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0127+23 : 0 50.000 MHz at IAT 1/ 12:32:15.0
FILLM1: Found 0221+27 : 0 50.000 MHz at IAT 1/ 12:36:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0221+27 : 0 50.000 MHz at IAT 1/ 12:41:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0017+15 : 0 50.000 MHz at IAT 1/ 12:52:35.0
FILLM1: Found 0037-01 : 0 50.000 MHz at IAT 1/ 13:05:35.0
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 13:19:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 13:22:45.0
FILLM1: Found 0658+38 : 0 50.000 MHz at IAT 1/ 13:28:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0658+38 : 0 50.000 MHz at IAT 1/ 13:29:45.0
FILLM1: Found 0538+498 : 0 50.000 MHz at IAT 1/ 13:35:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0710+439 : 0 50.000 MHz at IAT 1/ 13:40:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0710+439 : 0 50.000 MHz at IAT 1/ 13:44:25.0
FILLM1: Read 943481 visibilities from 1 files
FILLM1: Appears to have ended successfully
FILLM1: galaxy 31DEC07 TST: Cpu= 12.4 Real= 18
AIPS 1: Task FILLM has finished
>
>infile ''
>task 'listr'
>docrt 132
>optype 'scan'
>go prtan
PRTAN1: Task PRTAN (release of 31DEC07) begins
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:22:41 Page 1
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Array reference position in meters (Earth centered)
Array BX= -1601185.36500 BY= -5041977.54700 BZ= 3554875.87000
Polar X = 0.00000 Polar Y = 0.00000 arcsec
Earth rotation rate = 360.9856449734 degrees / IAT day
GST at UT=0 = 318.9583265404 degrees
UT1-UTC= 0.0000000 Data time(IAT )-UTC= 0.0000000 seconds
Solutions not yet determined for a particular FREQID
Ant 1 = VLA:_W32 BX= 1640.0303 BY= -4329.9413 BZ= -2416.7111
Mount=ALAZ Axis offset= 0.0016 meters IFA IFB
Feed polarization type = R L
Ant 2 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 3 = VLA:_W40 BX= 2394.9644 BY= -6350.0132 BZ= -3550.9950
Mount=ALAZ Axis offset= -0.0031 meters IFA IFB
Feed polarization type = R L
Ant 4 = VLA:_E32 BX= 1253.2485 BY= 4733.6062 BZ= -1816.9144
Mount=ALAZ Axis offset= 0.0094 meters IFA IFB
Feed polarization type = R L
Ant 5 = VLA:_E56 BX= 3241.9576 BY= 12366.0525 BZ= -4767.4403
Mount=ALAZ Axis offset= 0.0009 meters IFA IFB
Feed polarization type = R L
Ant 6 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 7 = VLA:_E72 BX= 4857.9229 BY= 19090.2649 BZ= -7275.8596
Mount=ALAZ Axis offset= -0.0026 meters IFA IFB
Feed polarization type = R L
Type Q to stop, just hit RETURN to continue
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:22:41 Page 2
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Ant 8 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 9 = VLA:_W8 BX= 152.7598 BY= -401.2719 BZ= -223.4041
Mount=ALAZ Axis offset= -0.0198 meters IFA IFB
Feed polarization type = R L
Ant 10 = VLA:_W24 BX= 1005.3810 BY= -2643.0135 BZ= -1472.2002
Mount=ALAZ Axis offset= 0.0001 meters IFA IFB
Feed polarization type = R L
Ant 11 = VLA:_W48 BX= 3275.1186 BY= -8682.4903 BZ= -4854.8593
Mount=ALAZ Axis offset= 0.0035 meters IFA IFB
Feed polarization type = R L
Ant 12 = VLA:_W72 BX= 6536.2763 BY= -17410.2065 BZ= -9755.5520
Mount=ALAZ Axis offset= -0.0005 meters IFA IFB
Feed polarization type = R L
Ant 13 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 14 = VLA:_E48 BX= 2495.7779 BY= 9491.9194 BZ= -3654.6917
Mount=ALAZ Axis offset= -0.0005 meters IFA IFB
Feed polarization type = R L
Ant 15 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 16 = VLA:_E24 BX= 765.2220 BY= 2889.4355 BZ= -1108.9018
Mount=ALAZ Axis offset= -0.0051 meters IFA IFB
Feed polarization type = R L
Type Q to stop, just hit RETURN to continue
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:22:41 Page 3
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Ant 17 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 18 = VLA:_E40 BX= 1836.9571 BY= 6942.0838 BZ= -2665.2267
Mount=ALAZ Axis offset= -0.0009 meters IFA IFB
Feed polarization type = R L
Ant 19 = VLA:_W56 BX= 4258.9960 BY= -11311.4948 BZ= -6330.0386
Mount=ALAZ Axis offset= -0.0034 meters IFA IFB
Feed polarization type = R L
Ant 20 = VLA:_W64 BX= 5349.1574 BY= -14224.3403 BZ= -7964.5005
Mount=ALAZ Axis offset= 0.0041 meters IFA IFB
Feed polarization type = R L
Ant 21 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 22 = VLA:_E64 BX= 4083.2246 BY= 15550.4438 BZ= -5990.5045
Mount=ALAZ Axis offset= 0.0021 meters IFA IFB
Feed polarization type = R L
Ant 23 = VLA:_E8 BX= 114.4367 BY= 438.6857 BZ= -169.4932
Mount=ALAZ Axis offset= -0.0012 meters IFA IFB
Feed polarization type = R L
Ant 24 = VLA:_E16 BX= 376.9957 BY= 1440.9897 BZ= -556.1199
Mount=ALAZ Axis offset= 0.0009 meters IFA IFB
Feed polarization type = R L
Ant 25 = VLA:_N16 BX= -801.3978 BY= -124.9821 BZ= 1182.1121
Mount=ALAZ Axis offset= -0.0027 meters IFA IFB
Feed polarization type = R L
Type Q to stop, just hit RETURN to continue
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:22:41 Page 4
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Ant 26 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 27 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 28 = VLA:_W16 BX= 499.8364 BY= -1317.9858 BZ= -735.2141
Mount=ALAZ Axis offset= -0.0029 meters IFA IFB
Feed polarization type = R L
Ant 29 = VPT:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Type Q to stop, just hit RETURN to continue
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:22:41 Page 5
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Location Of VLA Antennas
N16 (25)
( 9) W8 E8 (23)
(28) W16 E16 (24)
(10) W24 E24 (16)
( 1) W32 E32 ( 4)
( 3) W40 E40 (18)
(11) W48 E48 (14)
(19) W56 E56 ( 5)
(20) W64 E64 (22)
(12) W72 E72 ( 7)
VLA:_OUT ( 2)
VLA:_OUT ( 6)
VLA:_OUT ( 8)
VLA:_OUT (13)
VLA:_OUT (15)
VLA:_OUT (17)
VLA:_OUT (21)
VLA:_OUT (26)
VLA:_OUT (27)
VPT:_OUT (29)
PRTAN1: Appears to have ended successfully
PRTAN1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 1
AIPS 1: Resumes
>
>
>
>
>
>refant 25
>task 'vplot'
>pcat
AIPS 1: Catalog on disk 1
AIPS 1: Cat Usid Mapname Class Seq Pt Last access Stat
AIPS 1: 1 3666 19910811 .X BAND. 1 UV 29-FEB-2008 15:22:41
AIPS 1: 2 3666 19910811 .L BAND. 1 UV 29-FEB-2008 15:22:34
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>sour '0740+38''
>go
VPLOT1: Task VPLOT (release of 31DEC07) begins
VPLOT1: FQMATC: Setting FQ id number = 1
VPLOT1: Doing no flagging this time
VPLOT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
VPLOT1: Appears to have ended successfully
VPLOT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>dotv 1
>go
VPLOT1: Task VPLOT (release of 31DEC07) begins
VPLOT1: FQMATC: Setting FQ id number = 1
VPLOT1: Doing no flagging this time
VPLOT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
VPLOT1: Appears to have ended successfully
VPLOT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>inp
AIPS 1: VPLOT Plots data from a u,v data base, model from a CC file
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 Data base owner number
AIPS 1: INNAME '19910811' Input UV file name (name)
AIPS 1: INCLASS 'L BAND' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1: IN2NAME ' ' Input CC file name (name)
AIPS 1: IN2CLASS ' ' Input CC file name (class)
AIPS 1: IN2SEQ 0 Input CC file name (seq. #)
AIPS 1: IN2DISK 0 Input CC file disk unit #
AIPS 1: IN2VERS 0 Input CC file version #
AIPS 1: NCOMP *all 0 # comps to use for model.
AIPS 1: 1 value per field
AIPS 1: total 25000 CCs maximum
AIPS 1: FLUX 0 Lowest CC component used.
AIPS 1: NMAPS 0 # clean maps (fields).
AIPS 1: 0 => no model
AIPS 1: >0 => model at samples
AIPS 1: <0 => model smoothly
AIPS 1: Data selection:
AIPS 1: SOURCES '0740+38' Source list
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Source qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: BCHAN 1 Lowest channel number 0=>1
AIPS 1: ECHAN 0 Highest channel number
AIPS 1: 0=>BCHAN
AIPS 1: If BCHAN and ECHAN are
AIPS 1: different, then data will be
AIPS 1: averaged across specified
AIPS 1: channel range before plotting
AIPS 1: BIF 0 Lowest IF number 0=>1
AIPS 1: EIF 0 Highest IF number 0=>high
AIPS 1: AVGIF 0 > 0 => average IFs
AIPS 1: DO3COL 0 Plot separate IFs in separate
AIPS 1: colors.
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1
AIPS 1: UVRANGE 0 0 Range of projected spacings
AIPS 1: (thousands of wavelengths)
AIPS 1: TIMERANG *all 0 Time: start day,hr,min,sec
AIPS 1: stop day,hr,min,sec.
AIPS 1: STOKES ' ' Stokes' parameters
AIPS 1: ANTENNAS *all 0 Antennas to be plotted
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: See explanation.
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 0 CL (or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 0 Flag table version
AIPS 1: See explanation.
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER -1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: SUBARRAY 0 Subarray number 0=>1.
AIPS 1: -1 => all, but beware!
AIPS 1: DOEBAR -1 If > 0, plot error bars,
AIPS 1: else don't
AIPS 1: SOLINT 0 Time over which to average
AIPS 1: data before plotting (mins)
AIPS 1: =0 => no averaging
AIPS 1: >0 SOLINT=MIN(SOLINT, SCAN)
AIPS 1: <0 SOLINT=ABS(SOLINT)
AIPS 1: average through scans
AIPS 1: OPTYPE 'SCAN' 'AUTO' => autocorrelation
AIPS 1: else =>crosscorrelation
AIPS 1: OPCODE ' ' Type of plot:
AIPS 1: 'IFRA' => ratio BIF and EIF
AIPS 1: else => plot requested IF
AIPS 1: APARM *all 0 Control parameters
AIPS 1: 1 : > 0 => edit bad
AIPS 1: amplitude points.
AIPS 1: BPARM(2)=0, or 1
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: = 0 => do not edit
AIPS 1: bad amplitude points.
AIPS 1: Number of averaged points
AIPS 1: for each baseline has to
AIPS 1: be more than 10.
AIPS 1: 2 : number of sigmas outside
AIPS 1: of which bad points are
AIPS 1: clipped (See HELP); 0=>3.
AIPS 1: 3 : > 0 plot min/max range
AIPS 1: with average
AIPS 1: = 0 do not plot min/max
AIPS 1: lines
AIPS 1: 4 : = 0 min/max over selected
AIPS 1: IFs after averaging
AIPS 1: selected CHs
AIPS 1: > 0 min/max over all
AIPS 1: selected CH/IFs
AIPS 1: 5 : > 0 scalar average
AIPS 1: = 0 vector average
AIPS 1: 6 : used with APARM(1)>0
AIPS 1: >0 flag the bad points
AIPS 1: for all channels
AIPS 1: =0 flag the bad points
AIPS 1: only for the selected
AIPS 1: channels
AIPS 1: 7 : est total plot points
AIPS 1: BPARM *all 0 Control parameters
AIPS 1: 1 : X-axis type code
AIPS 1: 2 : Y-axis type code;
AIPS 1: if <0 => AMP & PHASE
AIPS 1: plotted together
AIPS 1: 3 : >0.0 => fixed scale
AIPS 1: <0.0 => fixed range
AIPS 1: 0.0 => sep. scales
AIPS 1: 4 : Xmin (fixed scale)
AIPS 1: 5 : Xmax (fixed scale)
AIPS 1: 6 : Ymin (fixed scale)
AIPS 1: 7 : Ymax (fixed scale)
AIPS 1: 8 : PHmin (fixed scale)
AIPS 1: 9 : PHmax (fixed scale)
AIPS 1: 10: > 0 -> plot models for
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: baselines with no data
AIPS 1: ALIAS *all 0 Antenna alias selection
AIPS 1: If ALIAS(1) is non-zero, any
AIPS 1: antennas matching ALIAS(2-30)
AIPS 1: are treated as if they were
AIPS 1: actually ALIAS(1)
AIPS 1: REFANT 25 > 0 -> use REFANT for hour
AIPS 1: angle, elevation, et al.
AIPS 1: NPLOTS 1 Max number of plots per page.
AIPS 1: 0 => 3; If bparm(2)<0 =>
AIPS 1: Max number of pairs of plots.
AIPS 1: DOARRAY -1 Array type : 0 = VLBI
AIPS 1: 1 = VLA and ATCA;
AIPS 1: 2 = MERLIN; 3 = WSRT
AIPS 1: POLPLOT ' ' Option to display various
AIPS 1: ratios of polarizations:
AIPS 1: 'RL/RR', 'RL/LL', 'LR/RR',
AIPS 1: 'LR/LL', 'RR/LL' 'LL/RR';
AIPS 1: 'Q/I', 'U/I', 'V/I'.
AIPS 1: other = plot data directly
AIPS 1: SYMBOL 0 Symbol to use when plotting.
AIPS 1: 0 => Vertical line
AIPS 1: 1 - 23, standard types
AIPS 1: FACTOR 0 Scale symbol by FACTOR
AIPS 1: LTYPE 3 Type of labeling: 1 border,
AIPS 1: 2 no ticks, 3 - 6 standard,
AIPS 1: 7 - 10 only tick labels
AIPS 1: <0 -> no date/time
AIPS 1: DOTV 1 > 0 Do plot on the TV, else
AIPS 1: make a plot file
AIPS 1: GRCHAN 0 Graphics channel 0 => 1.
>
>
>
>
>
>task 'uvplt'
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: Doing no flagging this time
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 70714 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 1.4 Real= 3
stokes 'rrll'
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: Doing no flagging this time
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 35379 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.8 Real= 1
pcat
AIPS 1: Catalog on disk 1
AIPS 1: Cat Usid Mapname Class Seq Pt Last access Stat
AIPS 1: 1 3666 19910811 .X BAND. 1 UV 29-FEB-2008 15:22:41
AIPS 1: 2 3666 19910811 .L BAND. 1 UV 29-FEB-2008 15:23:17
>sour '0742+103''
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: Doing no flagging this time
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 10431 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.2 Real= 1
task 'vplot'
>go
VPLOT1: Task VPLOT (release of 31DEC07) begins
VPLOT1: FQMATC: Setting FQ id number = 1
VPLOT1: Doing no flagging this time
VPLOT1: PLTVB: 48 points plotted: baseline 1 - 3
VPLOT1: Waiting 30 seconds:
VPLOT1: Hit TV button A to pause indefinitely. Hit button
VPLOT1: B or C to continue sooner, button D to stop plotting
AIPS 1: Resumes
>bVPLOT1: Continuing
VPLOT1: PLTVB: 49 points plotted: baseline 1 - 4
VPLOT1: Waiting 30 seconds:
VPLOT1: Hit TV button A to pause indefinitely. Hit button
VPLOT1: B or C to continue sooner, button D to stop plotting
VPLOT1: Continuing
VPLOT1: PLTVB: 51 points plotted: baseline 1 - 5
VPLOT1: Waiting 30 seconds:
VPLOT1: Hit TV button A to pause indefinitely. Hit button
VPLOT1: B or C to continue sooner, button D to stop plotting
VPLOT1: Button D was hit - stop plots now
VPLOT1: Appears to have ended successfully
VPLOT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 4
>
>inp
AIPS 1: VPLOT Plots data from a u,v data base, model from a CC file
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 Data base owner number
AIPS 1: INNAME '19910811' Input UV file name (name)
AIPS 1: INCLASS 'L BAND' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1: IN2NAME ' ' Input CC file name (name)
AIPS 1: IN2CLASS ' ' Input CC file name (class)
AIPS 1: IN2SEQ 0 Input CC file name (seq. #)
AIPS 1: IN2DISK 0 Input CC file disk unit #
AIPS 1: IN2VERS 0 Input CC file version #
AIPS 1: NCOMP *all 0 # comps to use for model.
AIPS 1: 1 value per field
AIPS 1: total 25000 CCs maximum
AIPS 1: FLUX 0 Lowest CC component used.
AIPS 1: NMAPS 0 # clean maps (fields).
AIPS 1: 0 => no model
AIPS 1: >0 => model at samples
AIPS 1: <0 => model smoothly
AIPS 1: Data selection:
AIPS 1: SOURCES '0742+103' Source list
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Source qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: BCHAN 1 Lowest channel number 0=>1
AIPS 1: ECHAN 0 Highest channel number
AIPS 1: 0=>BCHAN
AIPS 1: If BCHAN and ECHAN are
AIPS 1: different, then data will be
AIPS 1: averaged across specified
AIPS 1: channel range before plotting
AIPS 1: BIF 0 Lowest IF number 0=>1
AIPS 1: EIF 0 Highest IF number 0=>high
AIPS 1: AVGIF 0 > 0 => average IFs
AIPS 1: DO3COL 0 Plot separate IFs in separate
AIPS 1: colors.
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1
AIPS 1: UVRANGE 0 0 Range of projected spacings
AIPS 1: (thousands of wavelengths)
AIPS 1: TIMERANG *all 0 Time: start day,hr,min,sec
AIPS 1: stop day,hr,min,sec.
AIPS 1: STOKES 'RRLL' Stokes' parameters
AIPS 1: ANTENNAS *all 0 Antennas to be plotted
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: See explanation.
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 0 CL (or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 0 Flag table version
AIPS 1: See explanation.
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER -1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: SUBARRAY 0 Subarray number 0=>1.
AIPS 1: -1 => all, but beware!
AIPS 1: DOEBAR -1 If > 0, plot error bars,
AIPS 1: else don't
AIPS 1: SOLINT 0 Time over which to average
AIPS 1: data before plotting (mins)
AIPS 1: =0 => no averaging
AIPS 1: >0 SOLINT=MIN(SOLINT, SCAN)
AIPS 1: <0 SOLINT=ABS(SOLINT)
AIPS 1: average through scans
AIPS 1: OPTYPE 'SCAN' 'AUTO' => autocorrelation
AIPS 1: else =>crosscorrelation
AIPS 1: OPCODE ' ' Type of plot:
AIPS 1: 'IFRA' => ratio BIF and EIF
AIPS 1: else => plot requested IF
AIPS 1: APARM *all 0 Control parameters
AIPS 1: 1 : > 0 => edit bad
AIPS 1: amplitude points.
AIPS 1: BPARM(2)=0, or 1
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: = 0 => do not edit
AIPS 1: bad amplitude points.
AIPS 1: Number of averaged points
AIPS 1: for each baseline has to
AIPS 1: be more than 10.
AIPS 1: 2 : number of sigmas outside
AIPS 1: of which bad points are
AIPS 1: clipped (See HELP); 0=>3.
AIPS 1: 3 : > 0 plot min/max range
AIPS 1: with average
AIPS 1: = 0 do not plot min/max
AIPS 1: lines
AIPS 1: 4 : = 0 min/max over selected
AIPS 1: IFs after averaging
AIPS 1: selected CHs
AIPS 1: > 0 min/max over all
AIPS 1: selected CH/IFs
AIPS 1: 5 : > 0 scalar average
AIPS 1: = 0 vector average
AIPS 1: 6 : used with APARM(1)>0
AIPS 1: >0 flag the bad points
AIPS 1: for all channels
AIPS 1: =0 flag the bad points
AIPS 1: only for the selected
AIPS 1: channels
AIPS 1: 7 : est total plot points
AIPS 1: BPARM *all 0 Control parameters
AIPS 1: 1 : X-axis type code
AIPS 1: 2 : Y-axis type code;
AIPS 1: if <0 => AMP & PHASE
AIPS 1: plotted together
AIPS 1: 3 : >0.0 => fixed scale
AIPS 1: <0.0 => fixed range
AIPS 1: 0.0 => sep. scales
AIPS 1: 4 : Xmin (fixed scale)
AIPS 1: 5 : Xmax (fixed scale)
AIPS 1: 6 : Ymin (fixed scale)
AIPS 1: 7 : Ymax (fixed scale)
AIPS 1: 8 : PHmin (fixed scale)
AIPS 1: 9 : PHmax (fixed scale)
AIPS 1: 10: > 0 -> plot models for
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: baselines with no data
AIPS 1: ALIAS *all 0 Antenna alias selection
AIPS 1: If ALIAS(1) is non-zero, any
AIPS 1: antennas matching ALIAS(2-30)
AIPS 1: are treated as if they were
AIPS 1: actually ALIAS(1)
AIPS 1: REFANT 25 > 0 -> use REFANT for hour
AIPS 1: angle, elevation, et al.
AIPS 1: NPLOTS 1 Max number of plots per page.
AIPS 1: 0 => 3; If bparm(2)<0 =>
AIPS 1: Max number of pairs of plots.
AIPS 1: DOARRAY -1 Array type : 0 = VLBI
AIPS 1: 1 = VLA and ATCA;
AIPS 1: 2 = MERLIN; 3 = WSRT
AIPS 1: POLPLOT ' ' Option to display various
AIPS 1: ratios of polarizations:
AIPS 1: 'RL/RR', 'RL/LL', 'LR/RR',
AIPS 1: 'LR/LL', 'RR/LL' 'LL/RR';
AIPS 1: 'Q/I', 'U/I', 'V/I'.
AIPS 1: other = plot data directly
AIPS 1: SYMBOL 0 Symbol to use when plotting.
AIPS 1: 0 => Vertical line
AIPS 1: 1 - 23, standard types
AIPS 1: FACTOR 0 Scale symbol by FACTOR
AIPS 1: LTYPE 3 Type of labeling: 1 border,
AIPS 1: 2 no ticks, 3 - 6 standard,
AIPS 1: 7 - 10 only tick labels
AIPS 1: <0 -> no date/time
AIPS 1: DOTV 1 > 0 Do plot on the TV, else
AIPS 1: make a plot file
AIPS 1: GRCHAN 0 Graphics channel 0 => 1.
>
>
>
>sour '0740+38''
>go
VPLOT1: Task VPLOT (release of 31DEC07) begins
VPLOT1: FQMATC: Setting FQ id number = 1
VPLOT1: Doing no flagging this time
VPLOT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
VPLOT1: Appears to have ended successfully
VPLOT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>task 'uvflg'
>sour '0742+103''
>anten 9
>baselin 25
>stokes ''
>bif 1
>eif 1
>timer 00 21 02 50 00 21 03 00
>go
UVFLG1: Task UVFLG (release of 31DEC07) begins
UVFLG1: Wrote 1 flags to flag table version 1
UVFLG1: Appears to have ended successfully
UVFLG1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>task 'setjy'
>stokes ''
>uvrange 0
>timer 0
>antenna 0
>baseline 0
>bif 1
>eif 2
>zerosp 3.30 0 0 0
>go
SETJY1: Task SETJY (release of 31DEC07) begins
SETJY1: FQMATC: Setting FQ id number = 1
SETJY1: INVALID OPTYPE = 'SCAN' - TRY AGAIN
SETJY1: Purports to die of UNNATURAL causes
SETJY1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>optype ''
>go
SETJY1: Task SETJY (release of 31DEC07) begins
SETJY1: FQMATC: Setting FQ id number = 1
SETJY1: BIF = 1 EIF = 2 /Range of IFs
SETJY1: SOURCES = '0742+103 ' / Included
SETJY1: ZEROSP = 3.300 0.000 0.000 0.000 /I,Q,U,V fluxes
SETJY1: Appears to have ended successfully
SETJY1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>task 'calib'
>freq 1
>aparm 0
>aparm(6) 2
>cparm 0
>cparm(5) 1
>solmode 'a&p'
>minamper 10
>minphser 10
>calsour sour
>go
CALIB1: Task CALIB (release of 31DEC07) begins
CALIB1: CALIB USING 19910811 . L BAND . 1 DISK= 1 USID=3666
CALIB1: UVGET: Using flag table version 1 to edit data
CALIB1: Selecting and editing the data
CALIB1: Doing cal transfer mode with point model for each source
CALIB1: This is not self-calibration
CALIB1: Dividing data by source flux densities
CALIB1: Determining solutions using amp-scalar averaging
CALIB1: Writing SN table 1
CALIB1: RPOL, IF= 1 The average gain over these antennas is 2.623E+00
CALIB1: RPOL, IF= 2 The average gain over these antennas is 2.587E+00
CALIB1: LPOL, IF= 1 The average gain over these antennas is 2.621E+00
CALIB1: LPOL, IF= 2 The average gain over these antennas is 2.589E+00
CALIB1: Found 76 good solutions
CALIB1: Average closure rms = 0.0017 +- 0.0001
CALIB1: No data were found > 99.0 rms from solution
CALIB1: Appears to have ended successfully
CALIB1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>task 'clcal'
>calcode ''
>freq 1
>opcode 'cali'
>snver 0
>interp '2pt'
>gainver 1
>gainuse 0
>snver 1
>go
CLCAL1: Task CLCAL (release of 31DEC07) begins
CLCAL1: Using interpolation mode 2PT
CLCAL1: Copied CL file from vol/cno/vers 1 2 1 to 1 2 2
CLCAL1: Deleted 38 records from CL table no. 2
CLCAL1: Processing SN table 1
CLCAL1: SNMRG: Merging SN table
CLCAL1: SNMRG: Write 19 merged records from 19 input records
CLCAL1: SN2CL: Applying SN tables to CL table 1, writing CL table 2
CLCAL1: Appears to have ended successfully
CLCAL1: galaxy 31DEC07 TST: Cpu= 0.1 Real= 0
AIPS 1: Resumes
>sour '0740+38''
>go
CLCAL1: Task CLCAL (release of 31DEC07) begins
CLCAL1: Using interpolation mode 2PT
CLCAL1: Copied CL file from vol/cno/vers 1 2 1 to 1 2 3
CLCAL1: Processing SN table 1
CLCAL1: WARNING: SN table 1 has already been applied
CLCAL1: SNMRG: Merging SN table
CLCAL1: SNMRG: Write 19 merged records from 19 input records
CLCAL1: SN2CL: Applying SN tables to CL table 1, writing CL table 3
CLCAL1: SN2CL: WARNING: Will try to append new solutions to CL table 3
CLCAL1: SN2CL: This is because there are no entries for specified,
CLCAL1: SN2CL: TIMERANGE, SOURCE, SUBARRAY or FREQID in CL table 1
CLCAL1: SN2CL: WARNING: NO CL RECORDS WRITTEN
CLCAL1: Appears to have ended successfully
CLCAL1: galaxy 31DEC07 TST: Cpu= 0.1 Real= 0
AIPS 1: Resumes
>task 'uvplt'
>dotv 1
>docal 1
>gainuse 2
>sour '0742+103''
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
AIPS 1: Resumes
>UVPLT1: PLTUV: 20857 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.4 Real= 1
sour '0740+38''
>gainuse 3
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
UVPLT1: Purports to die of UNNATURAL causes
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>
>
>
>inp
AIPS 1: UVPLT Plots data from a u,v data base: multi-channel version
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 Data base owner number
AIPS 1: INNAME '19910811' Input UV file name (name)
AIPS 1: INCLASS 'L BAND' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1: SOURCES '0740+38' Sources to plot, ' '=>all.
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: STOKES ' ' Stokes type to select.
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID 1 Freq. ID to select.
AIPS 1: TIMERANG *all 0 Time range to select
AIPS 1: ANTENNAS *all 0 Antennas to plot
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: UVRANGE 0 0 UV range in kilolambda.
AIPS 1: SUBARRAY 0 Subarray, 0 => all
AIPS 1: BCHAN 1 1st spectral channel #
AIPS 1: ECHAN 0 Last spectral channel #
AIPS 1: CHINC 1 Increment in channel #
AIPS 1: BIF 1 Low IF number to plot
AIPS 1: EIF 2 Highest IF number to plot
AIPS 1: DOCALIB 1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 3 CAL (CL or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 0 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER -1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1.
AIPS 1: BPARM *all 0 Control parameters
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#gainuse 0
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
UVPLT1: Purports to die of UNNATURAL causes
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
UVPLT1: Purports to die of UNNATURAL causes
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>
>
>
>pcat
AIPS 1: Catalog on disk 1
AIPS 1: Cat Usid Mapname Class Seq Pt Last access Stat
AIPS 1: 1 3666 19910811 .X BAND. 1 UV 29-FEB-2008 15:22:41
AIPS 1: 2 3666 19910811 .L BAND. 1 UV 29-FEB-2008 15:28:34
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>docal -1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
UVPLT1: Purports to die of UNNATURAL causes
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>get n1
AIPS 1: FILE MISSING
>getn 1
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.X BAND.1
>zap
AIPS 1: Destroyed 1 extension files of type WX
AIPS 1: Destroyed 1 extension files of type TY
AIPS 1: Destroyed 1 extension files of type CL
AIPS 1: Destroyed 1 extension files of type FQ
AIPS 1: Destroyed 1 extension files of type SU
AIPS 1: Destroyed 1 extension files of type NX
AIPS 1: Destroyed 1 extension files of type AN
AIPS 1: Destroyed 1 extension files of type HI
AIPS 1: Destroyed UV image file: catno= 1 disk= 1
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>zap
AIPS 1: Destroyed 1 extension files of type SN
AIPS 1: Destroyed 1 extension files of type FG
AIPS 1: Destroyed 1 extension files of type WX
AIPS 1: Destroyed 1 extension files of type TY
AIPS 1: Destroyed 3 extension files of type CL
AIPS 1: Destroyed 1 extension files of type FQ
AIPS 1: Destroyed 1 extension files of type SU
AIPS 1: Destroyed 1 extension files of type NX
AIPS 1: Destroyed 1 extension files of type AN
AIPS 1: Destroyed 1 extension files of type HI
AIPS 1: Destroyed UV image file: catno= 2 disk= 1
>clrmsg
AIPS 1: User 3666 message file is empty
AIPS 1: Deleted 694 messages
>restore 0
>
>task 'fillm'
>infile 'fits:BIG_'
>indi 1
>outseq 0; outdi 1; DOUVCOMP -1; DOALL 1
>DOCONCAT 1; ncount 1; nfile 0
>go;wait
FILLM1: Task FILLM (release of 31DEC07) begins
FILLM1: ******************************************************
FILLM1: ** Times written by FILLM are now centered in **
FILLM1: ** the integration, before they were at the end **
FILLM1: ******************************************************
FILLM1: Shadow flag limit = 2.500E+01 meters.
FILLM1: Opacity correction in CL table weighted average of weather and
FILLM1: season. Weight for weather = 0.50
FILLM1: Gain curve correction in CL table read from file,
FILLM1: with variation as function of antenna and band.
FILLM1: Opening FITS:BIG_1
FILLM1: *** caution: CPARM(6) is 0 and VLAOBS is blank ***
FILLM1: ** subarray defaults to 1. It is recommended ***
FILLM1: *** to run FILLM with non-blank VLAOBS. ***
FILLM1: tape file # 1, start date/time = 19910811/20:56:20
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Program = AO105 ; Tape revision number = 24.
FILLM1: Create 19910811 .X BAND. 1 (UV) on disk 1 cno 1
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: FLMFQ: FQ entry tolerance = 1.000D+02 1.000D+02
FILLM1: Found 0742+103 : 0 50.000 MHz at IAT 0/ 20:56:15.0
FILLM1: Zenith opacity set to 0.010
FILLM1: Trying to access VLA antenna gains file...
FILLM1: ZTXOP2: using translated file name =
FILLM1: ZTXOP2: /home/aips/TEXT/IONS/VLA.GAINS
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Create 19910811 .L BAND. 1 (UV) on disk 1 cno 2
FILLM1: Ref. date = 19910811 A-C = 1.464900 B-D = 1.514900 GHz
FILLM1: Found 0742+103 : 0 50.000 MHz at IAT 0/ 21:01:45.0
AIPS 1: Resumes
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:05:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:14:45.0
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:18:15.0
FILLM1: Found 0742+318 : 0 50.000 MHz at IAT 0/ 21:25:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0740+38 : 0 50.000 MHz at IAT 0/ 21:39:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0751+298 : 0 50.000 MHz at IAT 0/ 21:49:25.0
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 22:04:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 22:07:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0802+10 : 0 50.000 MHz at IAT 0/ 22:10:25.0
FILLM1: Found 0824+29 : 0 50.000 MHz at IAT 0/ 22:20:15.0
FILLM1: Found 0858+29 : 0 50.000 MHz at IAT 0/ 22:44:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0858+29 : 0 50.000 MHz at IAT 0/ 22:49:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 0/ 22:56:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 0/ 23:00:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 23:04:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 23:11:05.0
FILLM1: Found 0906+43 : 0 50.000 MHz at IAT 0/ 23:13:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0906+43 : 0 50.000 MHz at IAT 0/ 23:21:05.0
FILLM1: Found 0850+581 : 0 50.000 MHz at IAT 0/ 23:31:25.0
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 0/ 23:55:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 1/ 00:07:35.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:17:45.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:21:15.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:21:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 00:32:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 00:41:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1148-001 : 0 50.000 MHz at IAT 1/ 00:53:55.0
FILLM1: Found 1217+02 : 0 50.000 MHz at IAT 1/ 00:58:15.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 01:24:15.0
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 1/ 01:27:55.0
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 01:40:25.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 01:50:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 01:55:15.0
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 02:00:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 02:06:15.0
FILLM1: Found 1350+31 : 0 50.000 MHz at IAT 1/ 02:11:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1350+31 : 0 50.000 MHz at IAT 1/ 02:15:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1144+402 : 0 50.000 MHz at IAT 1/ 02:20:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1144+402 : 0 50.000 MHz at IAT 1/ 02:24:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1150+497 : 0 50.000 MHz at IAT 1/ 02:28:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1143+50 : 0 50.000 MHz at IAT 1/ 02:53:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1143+50 : 0 50.000 MHz at IAT 1/ 03:02:45.0
FILLM1: Found 1203+64 : 0 50.000 MHz at IAT 1/ 03:12:55.0
FILLM1: Found 1216+487 : 0 50.000 MHz at IAT 1/ 03:18:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1216+487 : 0 50.000 MHz at IAT 1/ 03:22:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1254+47 : 0 50.000 MHz at IAT 1/ 03:25:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1254+47 : 0 50.000 MHz at IAT 1/ 03:39:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1258+40 : 0 50.000 MHz at IAT 1/ 03:48:05.0
FILLM1: Found 1317+52 : 0 50.000 MHz at IAT 1/ 04:16:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 04:45:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 04:52:35.0
FILLM1: Found 1419+41 : 0 50.000 MHz at IAT 1/ 04:57:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1419+41 : 0 50.000 MHz at IAT 1/ 05:06:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1416+06 : 0 50.000 MHz at IAT 1/ 05:17:05.0
FILLM1: Found 1532+016 : 0 50.000 MHz at IAT 1/ 05:26:55.0
FILLM1: Found 1540+18 : 0 50.000 MHz at IAT 1/ 05:34:45.0
FILLM1: Found 1641+17 : 0 50.000 MHz at IAT 1/ 05:56:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1641+17 : 0 50.000 MHz at IAT 1/ 06:10:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 06:22:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 06:28:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1323+65 : 0 50.000 MHz at IAT 1/ 06:33:15.0
FILLM1: Found 1345+584 : 0 50.000 MHz at IAT 1/ 06:52:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1345+584 : 0 50.000 MHz at IAT 1/ 07:07:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1347+539 : 0 50.000 MHz at IAT 1/ 07:17:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1347+539 : 0 50.000 MHz at IAT 1/ 07:32:05.0
FILLM1: Found 1358+624 : 0 50.000 MHz at IAT 1/ 07:42:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1358+624 : 0 50.000 MHz at IAT 1/ 07:46:55.0
FILLM1: Found 1443+77 : 0 50.000 MHz at IAT 1/ 07:50:15.0
FILLM1: Found 1447+77 : 0 50.000 MHz at IAT 1/ 07:54:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1447+77 : 0 50.000 MHz at IAT 1/ 07:59:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1458+71 : 0 50.000 MHz at IAT 1/ 08:09:35.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 08:15:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 08:22:15.0
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 08:26:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 08:38:15.0
FILLM1: Found 1857+56 : 0 50.000 MHz at IAT 1/ 08:53:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1828+48 : 0 50.000 MHz at IAT 1/ 09:07:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1828+48 : 0 50.000 MHz at IAT 1/ 09:19:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 09:32:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 09:43:35.0
FILLM1: Found 2037+51 : 0 50.000 MHz at IAT 1/ 09:58:45.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 10:14:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 10:21:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 10:25:35.0
FILLM1: Found 1857+56 : 0 50.000 MHz at IAT 1/ 10:40:35.0
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 10:55:15.0
FILLM1: Found 2037+51 : 0 50.000 MHz at IAT 1/ 11:10:15.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 11:25:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 11:32:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 2248+71 : 0 50.000 MHz at IAT 1/ 11:37:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 2252+12 : 0 50.000 MHz at IAT 1/ 11:43:15.0
FILLM1: Found 2223-05 : 0 50.000 MHz at IAT 1/ 11:51:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0017+15 : 0 50.000 MHz at IAT 1/ 11:59:25.0
FILLM1: Found 0037-01 : 0 50.000 MHz at IAT 1/ 12:11:35.0
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 12:26:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 12:29:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0127+23 : 0 50.000 MHz at IAT 1/ 12:32:15.0
FILLM1: Found 0221+27 : 0 50.000 MHz at IAT 1/ 12:36:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0221+27 : 0 50.000 MHz at IAT 1/ 12:41:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0017+15 : 0 50.000 MHz at IAT 1/ 12:52:35.0
FILLM1: Found 0037-01 : 0 50.000 MHz at IAT 1/ 13:05:35.0
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 13:19:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 13:22:45.0
FILLM1: Found 0658+38 : 0 50.000 MHz at IAT 1/ 13:28:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0658+38 : 0 50.000 MHz at IAT 1/ 13:29:45.0
FILLM1: Found 0538+498 : 0 50.000 MHz at IAT 1/ 13:35:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0710+439 : 0 50.000 MHz at IAT 1/ 13:40:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0710+439 : 0 50.000 MHz at IAT 1/ 13:44:25.0
FILLM1: Read 943481 visibilities from 1 files
FILLM1: Appears to have ended successfully
FILLM1: galaxy 31DEC07 TST: Cpu= 12.6 Real= 19
AIPS 1: Task FILLM has finished
>
>infile ''
>task 'listr'
>docrt 132
>optype 'scan'
>go prtan
PRTAN1: Task PRTAN (release of 31DEC07) begins
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:29:15 Page 1
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Array reference position in meters (Earth centered)
Array BX= -1601185.36500 BY= -5041977.54700 BZ= 3554875.87000
Polar X = 0.00000 Polar Y = 0.00000 arcsec
Earth rotation rate = 360.9856449734 degrees / IAT day
GST at UT=0 = 318.9583265404 degrees
UT1-UTC= 0.0000000 Data time(IAT )-UTC= 0.0000000 seconds
Solutions not yet determined for a particular FREQID
Ant 1 = VLA:_W32 BX= 1640.0303 BY= -4329.9413 BZ= -2416.7111
Mount=ALAZ Axis offset= 0.0016 meters IFA IFB
Feed polarization type = R L
Ant 2 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 3 = VLA:_W40 BX= 2394.9644 BY= -6350.0132 BZ= -3550.9950
Mount=ALAZ Axis offset= -0.0031 meters IFA IFB
Feed polarization type = R L
Ant 4 = VLA:_E32 BX= 1253.2485 BY= 4733.6062 BZ= -1816.9144
Mount=ALAZ Axis offset= 0.0094 meters IFA IFB
Feed polarization type = R L
Ant 5 = VLA:_E56 BX= 3241.9576 BY= 12366.0525 BZ= -4767.4403
Mount=ALAZ Axis offset= 0.0009 meters IFA IFB
Feed polarization type = R L
Ant 6 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 7 = VLA:_E72 BX= 4857.9229 BY= 19090.2649 BZ= -7275.8596
Mount=ALAZ Axis offset= -0.0026 meters IFA IFB
Feed polarization type = R L
Type Q to stop, just hit RETURN to continue
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:29:15 Page 2
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Ant 8 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 9 = VLA:_W8 BX= 152.7598 BY= -401.2719 BZ= -223.4041
Mount=ALAZ Axis offset= -0.0198 meters IFA IFB
Feed polarization type = R L
Ant 10 = VLA:_W24 BX= 1005.3810 BY= -2643.0135 BZ= -1472.2002
Mount=ALAZ Axis offset= 0.0001 meters IFA IFB
Feed polarization type = R L
Ant 11 = VLA:_W48 BX= 3275.1186 BY= -8682.4903 BZ= -4854.8593
Mount=ALAZ Axis offset= 0.0035 meters IFA IFB
Feed polarization type = R L
Ant 12 = VLA:_W72 BX= 6536.2763 BY= -17410.2065 BZ= -9755.5520
Mount=ALAZ Axis offset= -0.0005 meters IFA IFB
Feed polarization type = R L
Ant 13 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 14 = VLA:_E48 BX= 2495.7779 BY= 9491.9194 BZ= -3654.6917
Mount=ALAZ Axis offset= -0.0005 meters IFA IFB
Feed polarization type = R L
Ant 15 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 16 = VLA:_E24 BX= 765.2220 BY= 2889.4355 BZ= -1108.9018
Mount=ALAZ Axis offset= -0.0051 meters IFA IFB
Feed polarization type = R L
Type Q to stop, just hit RETURN to continue
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:29:15 Page 3
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Ant 17 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 18 = VLA:_E40 BX= 1836.9571 BY= 6942.0838 BZ= -2665.2267
Mount=ALAZ Axis offset= -0.0009 meters IFA IFB
Feed polarization type = R L
Ant 19 = VLA:_W56 BX= 4258.9960 BY= -11311.4948 BZ= -6330.0386
Mount=ALAZ Axis offset= -0.0034 meters IFA IFB
Feed polarization type = R L
Ant 20 = VLA:_W64 BX= 5349.1574 BY= -14224.3403 BZ= -7964.5005
Mount=ALAZ Axis offset= 0.0041 meters IFA IFB
Feed polarization type = R L
Ant 21 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 22 = VLA:_E64 BX= 4083.2246 BY= 15550.4438 BZ= -5990.5045
Mount=ALAZ Axis offset= 0.0021 meters IFA IFB
Feed polarization type = R L
Ant 23 = VLA:_E8 BX= 114.4367 BY= 438.6857 BZ= -169.4932
Mount=ALAZ Axis offset= -0.0012 meters IFA IFB
Feed polarization type = R L
Ant 24 = VLA:_E16 BX= 376.9957 BY= 1440.9897 BZ= -556.1199
Mount=ALAZ Axis offset= 0.0009 meters IFA IFB
Feed polarization type = R L
Ant 25 = VLA:_N16 BX= -801.3978 BY= -124.9821 BZ= 1182.1121
Mount=ALAZ Axis offset= -0.0027 meters IFA IFB
Feed polarization type = R L
Type Q to stop, just hit RETURN to continue
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:29:15 Page 4
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Ant 26 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 27 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 28 = VLA:_W16 BX= 499.8364 BY= -1317.9858 BZ= -735.2141
Mount=ALAZ Axis offset= -0.0029 meters IFA IFB
Feed polarization type = R L
Ant 29 = VPT:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Type Q to stop, just hit RETURN to continue
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:29:15 Page 5
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Location Of VLA Antennas
N16 (25)
( 9) W8 E8 (23)
(28) W16 E16 (24)
(10) W24 E24 (16)
( 1) W32 E32 ( 4)
( 3) W40 E40 (18)
(11) W48 E48 (14)
(19) W56 E56 ( 5)
(20) W64 E64 (22)
(12) W72 E72 ( 7)
VLA:_OUT ( 2)
VLA:_OUT ( 6)
VLA:_OUT ( 8)
VLA:_OUT (13)
VLA:_OUT (15)
VLA:_OUT (17)
VLA:_OUT (21)
VLA:_OUT (26)
VLA:_OUT (27)
VPT:_OUT (29)
PRTAN1: Appears to have ended successfully
PRTAN1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>
>
>
>
>
>
>
>
>
>
>refant 25
>task 'uvflg'
>sour '0742+103''
>anten 9
>baseline 25
>bif 1
>eif 1
>timer 00 21 02 50 00 21 03 00
>go
UVFLG1: Task UVFLG (release of 31DEC07) begins
UVFLG1: Wrote 1 flags to flag table version 1
UVFLG1: Appears to have ended successfully
UVFLG1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>task 'uvplt'
>anten 0
>basline 0
AIPS 1: SYMBOL? BASLINE
>timer 0
>baseline 0
>stokes ''
>dotv 1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
AIPS 1: Resumes
>UVPLT1: PLTUV: 20844 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.5 Real= 1
sout '0740+38''
AIPS 1: SYMBOL? SOUT
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
AIPS 1: Resumes
>UVPLT1: PLTUV: 20844 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.5 Real= 2
>sour '0740+38''
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: SOUFIL: ALL SOURCES REJECTED BY SELECTION CRITERIA
UVPLT1: Purports to die of UNNATURAL causes
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: Doing no flagging this time
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 35354 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.7 Real= 1
task 'uvflg'
>anten 9
>baseline 25
>bif 1
>eif 1
>timer 00 21 02 50 00 21 03 00
>sour '0742+103''
>go
UVFLG1: Task UVFLG (release of 31DEC07) begins
UVFLG1: Wrote 1 flags to flag table version 1
UVFLG1: Appears to have ended successfully
UVFLG1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>task 'uvplt'
>timer 0
>baseline 0
>anten 0
>stokes ''
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 10433 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.2 Real= 0
sour '0740+38''
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 35354 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.7 Real= 2
>task 'setjy'
>stokes ''
>uvrange 0
>timer 0
>antenna 0
>baseline 0
>bif 1
>eif 2
>optype ''
>zerosp 3.30 0 0 0
>go
SETJY1: Task SETJY (release of 31DEC07) begins
SETJY1: FQMATC: Setting FQ id number = 1
SETJY1: BIF = 1 EIF = 2 /Range of IFs
SETJY1: SOURCES = '0740+38 ' / Included
SETJY1: ZEROSP = 3.300 0.000 0.000 0.000 /I,Q,U,V fluxes
SETJY1: Appears to have ended successfully
SETJY1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>
>task 'calib'
>freq 1
>aparm 0
>aparm(6) 2
>cparm 0
>cparm(5) 1
>solmode 'a&p'
>minamper 10
>minphser 10
>calsour sour
>go
CALIB1: Task CALIB (release of 31DEC07) begins
CALIB1: CALIB USING 19910811 . L BAND . 1 DISK= 1 USID=3666
CALIB1: UVGET: Using flag table version 1 to edit data
CALIB1: Purports to die of UNNATURAL causes
CALIB1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>inp
AIPS 1: CALIB: Task to determine calibration for data.
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: Input uv data.
AIPS 1: INNAME '19910811' UV file name (name)
AIPS 1: INCLASS 'L BAND' UV file name (class)
AIPS 1: INSEQ 1 UV file name (seq. #)
AIPS 1: INDISK 1 UV file disk drive #
AIPS 1: Data selection (multisource):
AIPS 1: CALSOUR '0740+38' Calibrator sources
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Calibrator qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID 1 Freq. ID to select.
AIPS 1: TIMERANG *all 0 Time range to use.
AIPS 1: BCHAN 1 Lowest channel number 0=>all
AIPS 1: ECHAN 0 Highest channel number
AIPS 1: ANTENNAS *all 0 Antennas to select. 0=all
AIPS 1: DOFIT *all 0 Subset of ANTENNAS list for
AIPS 1: which solns are desired.
AIPS 1: ANTUSE *all 0 Mean gain is calculated
AIPS 1: (CPARM(2)>0) using only the
AIPS 1: listed antennas. See explain.
AIPS 1: SUBARRAY 0 Subarray, 0=>all
AIPS 1: UVRANGE 0 0 Range of uv distance for full
AIPS 1: weight
AIPS 1: WTUV 0 Weight outside UVRANGE 0=0.
AIPS 1: WEIGHTIT 0 Modify data weights function
AIPS 1: Cal. info for input:
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 0 CL table to apply.
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 0 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER -1 Bandpass table version
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1:
AIPS 1: CLEAN map. See HELP.
AIPS 1: IN2NAME ' ' Cleaned map name (name)
AIPS 1: IN2CLASS ' ' Cleaned map name (class)
AIPS 1: IN2SEQ 0 Cleaned map name (seq. #)
AIPS 1: IN2DISK 0 Cleaned map disk unit #
AIPS 1: INVERS 0 CC file version #.
AIPS 1: NCOMP *all 0 # comps to use for model.
AIPS 1: 1 value per field
AIPS 1: FLUX 0 Lowest CC component used.
AIPS 1: NMAPS 0 No. Clean map files
AIPS 1: CMETHOD ' ' Modeling method:
AIPS 1: 'DFT','GRID',' '
AIPS 1: CMODEL ' ' Model type: 'COMP','IMAG'
AIPS 1: SMODEL *all 0 Source model, 1=flux,2=x,3=y
AIPS 1: See HELP SMODEL for models.
AIPS 1:
AIPS 1: Output uv data file.
AIPS 1: OUTNAME ' ' UV file name (name)
AIPS 1: OUTCLASS ' ' UV file name (class)
AIPS 1: OUTSEQ 0 UV file name (seq. #)
AIPS 1: OUTDISK 1 UV file disk drive #
AIPS 1:
AIPS 1: Solution control adverbs:
AIPS 1: REFANT 25 Reference antenna
AIPS 1: SOLINT 0 Solution interval (min)
AIPS 1: SOLSUB 0 Solution subinterval
AIPS 1: SOLMIN 0 Min solution interval
AIPS 1: APARM 0 0 General parameters
AIPS 1: 0 0 1=min. no. antennas
AIPS 1: 0 2 2 > 0 => data divided
AIPS 1: *rest 0 3 > 0 => avg. RR,LL
AIPS 1: 5 > 0 => avg. IFs.
AIPS 1: 6=print level, 1=good,
AIPS 1: 2 closure, 3 SNR
AIPS 1: 7=SNR cutoff (0=>5)
AIPS 1: 8=max. ant. # (no AN)
AIPS 1: 9 > 0 => pass failed soln
AIPS 1: 10 < 99 cal output weights
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: Phase-amplitude Parameters:
AIPS 1: DOFLAG 0 Flag on closure error?
AIPS 1: SOLTYPE ' ' Soln type,' ','L1','GCON',
AIPS 1: 'R', 'L1R', 'GCOR'
AIPS 1: SOLMODE 'A&P' Soln. mode: 'A&P','P','P!A',
AIPS 1: 'GCON',
AIPS 1: SOLCON 0 Gain constraint factor.
AIPS 1: MINAMPER 10 Amplitude closure error
AIPS 1: regarded as excessive in %
AIPS 1: MINPHSER 10 Phase closure error regarded
AIPS 1: as excessive in degrees
AIPS 1: CPARM 0 0 Phase-amp. parameters
AIPS 1: 0 0 1 = Min el for gain
AIPS 1: 1 *rest 0 normalization (deg)
AIPS 1: 2 >0 => normalize gain
AIPS 1: 3 avg. amp. closure err
AIPS 1: 4 avg. ph. closure err
AIPS 1: 5 >0 => scalar average
AIPS 1: 6 limit clipping in robust
AIPS 1: 7 limit display of closure
AIPS 1: errors
AIPS 1: SNVER 0 Output SN table, 0=>new table
AIPS 1: ANTWT *all 0 Ant. weights (0=>1.0)
AIPS 1: GAINERR *all 0 Std. Dev. of antenna gains.
AIPS 1: BADDISK *all 0 Disk no. not to use for
AIPS 1: scratch files.
>
>
>pca
AIPS 1: Catalog on disk 1
AIPS 1: Cat Usid Mapname Class Seq Pt Last access Stat
AIPS 1: 1 3666 19910811 .X BAND. 1 UV 29-FEB-2008 15:30:01
AIPS 1: 2 3666 19910811 .L BAND. 1 UV 29-FEB-2008 15:30:58
>getn 1
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.X BAND.1
>zap
AIPS 1: Destroyed 1 extension files of type FG
AIPS 1: Destroyed 1 extension files of type WX
AIPS 1: Destroyed 1 extension files of type TY
AIPS 1: Destroyed 1 extension files of type CL
AIPS 1: Destroyed 1 extension files of type FQ
AIPS 1: Destroyed 1 extension files of type SU
AIPS 1: Destroyed 1 extension files of type NX
AIPS 1: Destroyed 1 extension files of type AN
AIPS 1: Destroyed 1 extension files of type HI
AIPS 1: Destroyed UV image file: catno= 1 disk= 1
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>zap
AIPS 1: Destroyed 1 extension files of type FG
AIPS 1: Destroyed 1 extension files of type WX
AIPS 1: Destroyed 1 extension files of type TY
AIPS 1: Destroyed 1 extension files of type CL
AIPS 1: Destroyed 1 extension files of type FQ
AIPS 1: Destroyed 1 extension files of type SU
AIPS 1: Destroyed 1 extension files of type NX
AIPS 1: Destroyed 1 extension files of type AN
AIPS 1: Destroyed 1 extension files of type HI
AIPS 1: Destroyed UV image file: catno= 2 disk= 1
>clrmsg
AIPS 1: User 3666 message file is empty
AIPS 1: Deleted 581 messages
>restore 0
>
>task 'fillm'
>infile 'fits:BIG_'
>indi 1
>outseq 0; outdi 1; DOUVCOMP -1; DOALL 1
>DOCONCAT 1; ncount 1; nfile 0
>go;wait
FILLM1: Task FILLM (release of 31DEC07) begins
FILLM1: ******************************************************
FILLM1: ** Times written by FILLM are now centered in **
FILLM1: ** the integration, before they were at the end **
FILLM1: ******************************************************
FILLM1: Shadow flag limit = 2.500E+01 meters.
FILLM1: Opacity correction in CL table weighted average of weather and
FILLM1: season. Weight for weather = 0.50
FILLM1: Gain curve correction in CL table read from file,
FILLM1: with variation as function of antenna and band.
FILLM1: Opening FITS:BIG_1
FILLM1: *** caution: CPARM(6) is 0 and VLAOBS is blank ***
FILLM1: ** subarray defaults to 1. It is recommended ***
FILLM1: *** to run FILLM with non-blank VLAOBS. ***
FILLM1: tape file # 1, start date/time = 19910811/20:56:20
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Program = AO105 ; Tape revision number = 24.
FILLM1: Create 19910811 .X BAND. 1 (UV) on disk 1 cno 1
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: FLMFQ: FQ entry tolerance = 1.000D+02 1.000D+02
FILLM1: Found 0742+103 : 0 50.000 MHz at IAT 0/ 20:56:15.0
FILLM1: Zenith opacity set to 0.010
FILLM1: Trying to access VLA antenna gains file...
FILLM1: ZTXOP2: using translated file name =
FILLM1: ZTXOP2: /home/aips/TEXT/IONS/VLA.GAINS
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Create 19910811 .L BAND. 1 (UV) on disk 1 cno 2
FILLM1: Ref. date = 19910811 A-C = 1.464900 B-D = 1.514900 GHz
FILLM1: Found 0742+103 : 0 50.000 MHz at IAT 0/ 21:01:45.0
AIPS 1: Resumes
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:05:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:14:45.0
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:18:15.0
FILLM1: Found 0742+318 : 0 50.000 MHz at IAT 0/ 21:25:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0740+38 : 0 50.000 MHz at IAT 0/ 21:39:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0751+298 : 0 50.000 MHz at IAT 0/ 21:49:25.0
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 22:04:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 22:07:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0802+10 : 0 50.000 MHz at IAT 0/ 22:10:25.0
FILLM1: Found 0824+29 : 0 50.000 MHz at IAT 0/ 22:20:15.0
FILLM1: Found 0858+29 : 0 50.000 MHz at IAT 0/ 22:44:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0858+29 : 0 50.000 MHz at IAT 0/ 22:49:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 0/ 22:56:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 0/ 23:00:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 23:04:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 23:11:05.0
FILLM1: Found 0906+43 : 0 50.000 MHz at IAT 0/ 23:13:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0906+43 : 0 50.000 MHz at IAT 0/ 23:21:05.0
FILLM1: Found 0850+581 : 0 50.000 MHz at IAT 0/ 23:31:25.0
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 0/ 23:55:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 1/ 00:07:35.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:17:45.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:21:15.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:21:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 00:32:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 00:41:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1148-001 : 0 50.000 MHz at IAT 1/ 00:53:55.0
FILLM1: Found 1217+02 : 0 50.000 MHz at IAT 1/ 00:58:15.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 01:24:15.0
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 1/ 01:27:55.0
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 01:40:25.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 01:50:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 01:55:15.0
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 02:00:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 02:06:15.0
FILLM1: Found 1350+31 : 0 50.000 MHz at IAT 1/ 02:11:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1350+31 : 0 50.000 MHz at IAT 1/ 02:15:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1144+402 : 0 50.000 MHz at IAT 1/ 02:20:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1144+402 : 0 50.000 MHz at IAT 1/ 02:24:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1150+497 : 0 50.000 MHz at IAT 1/ 02:28:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1143+50 : 0 50.000 MHz at IAT 1/ 02:53:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1143+50 : 0 50.000 MHz at IAT 1/ 03:02:45.0
FILLM1: Found 1203+64 : 0 50.000 MHz at IAT 1/ 03:12:55.0
FILLM1: Found 1216+487 : 0 50.000 MHz at IAT 1/ 03:18:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1216+487 : 0 50.000 MHz at IAT 1/ 03:22:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1254+47 : 0 50.000 MHz at IAT 1/ 03:25:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1254+47 : 0 50.000 MHz at IAT 1/ 03:39:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1258+40 : 0 50.000 MHz at IAT 1/ 03:48:05.0
FILLM1: Found 1317+52 : 0 50.000 MHz at IAT 1/ 04:16:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 04:45:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 04:52:35.0
FILLM1: Found 1419+41 : 0 50.000 MHz at IAT 1/ 04:57:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1419+41 : 0 50.000 MHz at IAT 1/ 05:06:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1416+06 : 0 50.000 MHz at IAT 1/ 05:17:05.0
FILLM1: Found 1532+016 : 0 50.000 MHz at IAT 1/ 05:26:55.0
FILLM1: Found 1540+18 : 0 50.000 MHz at IAT 1/ 05:34:45.0
FILLM1: Found 1641+17 : 0 50.000 MHz at IAT 1/ 05:56:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1641+17 : 0 50.000 MHz at IAT 1/ 06:10:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 06:22:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 06:28:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1323+65 : 0 50.000 MHz at IAT 1/ 06:33:15.0
FILLM1: Found 1345+584 : 0 50.000 MHz at IAT 1/ 06:52:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1345+584 : 0 50.000 MHz at IAT 1/ 07:07:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1347+539 : 0 50.000 MHz at IAT 1/ 07:17:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1347+539 : 0 50.000 MHz at IAT 1/ 07:32:05.0
FILLM1: Found 1358+624 : 0 50.000 MHz at IAT 1/ 07:42:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1358+624 : 0 50.000 MHz at IAT 1/ 07:46:55.0
FILLM1: Found 1443+77 : 0 50.000 MHz at IAT 1/ 07:50:15.0
FILLM1: Found 1447+77 : 0 50.000 MHz at IAT 1/ 07:54:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1447+77 : 0 50.000 MHz at IAT 1/ 07:59:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1458+71 : 0 50.000 MHz at IAT 1/ 08:09:35.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 08:15:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 08:22:15.0
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 08:26:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 08:38:15.0
FILLM1: Found 1857+56 : 0 50.000 MHz at IAT 1/ 08:53:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1828+48 : 0 50.000 MHz at IAT 1/ 09:07:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1828+48 : 0 50.000 MHz at IAT 1/ 09:19:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 09:32:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 09:43:35.0
FILLM1: Found 2037+51 : 0 50.000 MHz at IAT 1/ 09:58:45.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 10:14:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 10:21:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 10:25:35.0
FILLM1: Found 1857+56 : 0 50.000 MHz at IAT 1/ 10:40:35.0
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 10:55:15.0
FILLM1: Found 2037+51 : 0 50.000 MHz at IAT 1/ 11:10:15.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 11:25:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 11:32:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 2248+71 : 0 50.000 MHz at IAT 1/ 11:37:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 2252+12 : 0 50.000 MHz at IAT 1/ 11:43:15.0
FILLM1: Found 2223-05 : 0 50.000 MHz at IAT 1/ 11:51:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0017+15 : 0 50.000 MHz at IAT 1/ 11:59:25.0
FILLM1: Found 0037-01 : 0 50.000 MHz at IAT 1/ 12:11:35.0
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 12:26:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 12:29:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0127+23 : 0 50.000 MHz at IAT 1/ 12:32:15.0
FILLM1: Found 0221+27 : 0 50.000 MHz at IAT 1/ 12:36:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0221+27 : 0 50.000 MHz at IAT 1/ 12:41:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0017+15 : 0 50.000 MHz at IAT 1/ 12:52:35.0
FILLM1: Found 0037-01 : 0 50.000 MHz at IAT 1/ 13:05:35.0
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 13:19:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 13:22:45.0
FILLM1: Found 0658+38 : 0 50.000 MHz at IAT 1/ 13:28:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0658+38 : 0 50.000 MHz at IAT 1/ 13:29:45.0
FILLM1: Found 0538+498 : 0 50.000 MHz at IAT 1/ 13:35:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0710+439 : 0 50.000 MHz at IAT 1/ 13:40:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0710+439 : 0 50.000 MHz at IAT 1/ 13:44:25.0
FILLM1: Read 943481 visibilities from 1 files
FILLM1: Appears to have ended successfully
FILLM1: galaxy 31DEC07 TST: Cpu= 12.3 Real= 17
AIPS 1: Task FILLM has finished
>
>
>task 'uvflg'
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>pcat
AIPS 1: Catalog on disk 1
AIPS 1: Cat Usid Mapname Class Seq Pt Last access Stat
AIPS 1: 1 3666 19910811 .X BAND. 1 UV 29-FEB-2008 15:31:47
AIPS 1: 2 3666 19910811 .L BAND. 1 UV 29-FEB-2008 15:31:47
>sour '0742+103''
>bif 1
>eif 1
>timer 00 21 02 50 00 21 03 00
>anten 9
>baseline 25
>go
UVFLG1: Task UVFLG (release of 31DEC07) begins
UVFLG1: ZTXOP2: using translated file name =
UVFLG1: ZTXOP2: /home/aips/FITS/BIG_
UVFLG1: ZTXOP2: FILE TO BE READ DOES NOT EXIST
UVFLG1: ERROR 5 OPENING EDIT TABLE
UVFLG1: Purports to die of UNNATURAL causes
UVFLG1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>infile ''
>go
UVFLG1: Task UVFLG (release of 31DEC07) begins
UVFLG1: Wrote 1 flags to flag table version 1
UVFLG1: Appears to have ended successfully
UVFLG1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>task 'uvplt'
>anten 0
>dotv 1
>baseline 0
>timer 0
>stokes ''
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 10433 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.2 Real= 0
go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 10433 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.2 Real= 1
inp
AIPS 1: UVPLT Plots data from a u,v data base: multi-channel version
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 Data base owner number
AIPS 1: INNAME '19910811' Input UV file name (name)
AIPS 1: INCLASS 'L BAND' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1: SOURCES '0742+103' Sources to plot, ' '=>all.
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: STOKES ' ' Stokes type to select.
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: TIMERANG *all 0 Time range to select
AIPS 1: ANTENNAS *all 0 Antennas to plot
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: UVRANGE 0 0 UV range in kilolambda.
AIPS 1: SUBARRAY 0 Subarray, 0 => all
AIPS 1: BCHAN 1 1st spectral channel #
AIPS 1: ECHAN 0 Last spectral channel #
AIPS 1: CHINC 1 Increment in channel #
AIPS 1: BIF 1 Low IF number to plot
AIPS 1: EIF 1 Highest IF number to plot
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 0 CAL (CL or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 0 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER -1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1.
AIPS 1: BPARM *all 0 Control parameters
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: 1 : X-axis type 0=>UV dist
AIPS 1: 2 : Y-axis type 0=>Ampl
AIPS 1: 1=> amplitude (Jy)
AIPS 1: 2=> phase (degrees)
AIPS 1: 3=> uv dist. (klambda)
AIPS 1: 4=> uv p.a. (deg N->E)
AIPS 1: 5=> time (IAT days)
AIPS 1: 6=> u (klambda)
AIPS 1: 7=> v (klambda)
AIPS 1: 8=> w (klambda)
AIPS 1: 9=> Re(Vis) (Jy)
AIPS 1: 10=> Im(Vis) (Jy)
AIPS 1: 11=> time (IAT hours)
AIPS 1: 12=> log(ampl)
AIPS 1: 13=> weight
AIPS 1: 14=> HA (hours)
AIPS 1: 15=> elevation (deg)
AIPS 1: 16=> parallactic angle
AIPS 1: 17=> uv dist. (klambda)
AIPS 1: along p.a.
AIPS 1: 18=> azimuth (deg)
AIPS 1: 3 : > 0.0 => fixed scale
AIPS 1: < 0.0 => fixed range
AIPS 1: 4 : Xmin (fixed scale)
AIPS 1: 5 : Xmax (fixed scale)
AIPS 1: 6 : Ymin (fixed scale)
AIPS 1: 7 : Ymax (fixed scale)
AIPS 1: 8 : Number of bins in plot.
AIPS 1: 9 : > 0 => list bin values.
AIPS 1: 10: > 0 => plot auto-corr too
AIPS 1: BPARM=6,7,2,0 generates
AIPS 1: square UV coverage plots
AIPS 1: DOWEIGHT 1 > 0 use weights in binning
AIPS 1: REFANT 0 > 0 => use REFANT for plot
AIPS 1: types 14, 15, 16, 18
AIPS 1: ROTATE 0 uv p.a. for projection
AIPS 1: (deg N->E); type 17 only
AIPS 1: FACTOR 0 Scale dots by FACTOR
AIPS 1: < 0 => connect dots too
AIPS 1: DO3COL 0 > 0 use 3-color to separate
AIPS 1: channels and IFs.
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: LTYPE 3 Type of labeling: 1 border,
AIPS 1: 2 no ticks, 3 - 6 standard,
AIPS 1: 7 - 10 only tick labels
AIPS 1: <0 -> no date/time
AIPS 1: BADDISK *all 0 Disk to avoid for scratch.
AIPS 1: DOTV 1 > 0 Do plot on the TV, else
AIPS 1: make a plot file
AIPS 1: GRCHAN 0 Graphics channel 0 => 1.
>
>
>
>sour '0740+38''
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 35354 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.8 Real= 2
task 'setjy'
>stokes ''
>uvrange 0
>timer 0
>antenna 0
>baseline 0
>bif 1
>eif 2
>optype ''
>sour '0742+103''
>zerosp 3.30 0 0 0
>go
SETJY1: Task SETJY (release of 31DEC07) begins
SETJY1: FQMATC: Setting FQ id number = 1
SETJY1: BIF = 1 EIF = 2 /Range of IFs
SETJY1: SOURCES = '0742+103 ' / Included
SETJY1: ZEROSP = 3.300 0.000 0.000 0.000 /I,Q,U,V fluxes
SETJY1: Appears to have ended successfully
SETJY1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>task 'calib'
>freq 1
>aparm 0
>aparm(6) 2
>cparm 0
>cparm(5) 1
>solmode 'a&p'
>minamper 10
>minphser 10
>calsour sour
>go
CALIB1: Task CALIB (release of 31DEC07) begins
CALIB1: CALIB USING 19910811 . L BAND . 1 DISK= 1 USID=3666
CALIB1: UVGET: Using flag table version 1 to edit data
CALIB1: Selecting and editing the data
CALIB1: Doing cal transfer mode with point model for each source
CALIB1: This is not self-calibration
CALIB1: Dividing data by source flux densities
CALIB1: Determining solutions using amp-scalar averaging
CALIB1: Writing SN table 1
CALIB1: RPOL, IF= 1 The average gain over these antennas is 2.623E+00
CALIB1: RPOL, IF= 2 The average gain over these antennas is 2.587E+00
CALIB1: LPOL, IF= 1 The average gain over these antennas is 2.621E+00
CALIB1: LPOL, IF= 2 The average gain over these antennas is 2.589E+00
CALIB1: Found 76 good solutions
CALIB1: Average closure rms = 0.0017 +- 0.0001
CALIB1: No data were found > 99.0 rms from solution
CALIB1: Adjusting solutions to a common reference antenna
CALIB1: Appears to have ended successfully
CALIB1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>
>task 'clcal'
>calcode ''
>freq 1
>opcode 'cali'
>snver 0
>interp '2pt'
>gainver 1
>gainuse 0
>snver 1
>go
CLCAL1: Task CLCAL (release of 31DEC07) begins
CLCAL1: Using interpolation mode 2PT
CLCAL1: Copied CL file from vol/cno/vers 1 2 1 to 1 2 2
CLCAL1: Deleted 38 records from CL table no. 2
CLCAL1: Processing SN table 1
CLCAL1: SNMRG: Merging SN table
CLCAL1: SNMRG: Write 19 merged records from 19 input records
CLCAL1: SN2CL: Applying SN tables to CL table 1, writing CL table 2
CLCAL1: Appears to have ended successfully
CLCAL1: galaxy 31DEC07 TST: Cpu= 0.1 Real= 0
AIPS 1: Resumes
>sour '0740+38''
>go
CLCAL1: Task CLCAL (release of 31DEC07) begins
CLCAL1: Using interpolation mode 2PT
CLCAL1: Copied CL file from vol/cno/vers 1 2 1 to 1 2 3
CLCAL1: Processing SN table 1
CLCAL1: WARNING: SN table 1 has already been applied
CLCAL1: SNMRG: Merging SN table
CLCAL1: SNMRG: Write 19 merged records from 19 input records
CLCAL1: SN2CL: Applying SN tables to CL table 1, writing CL table 3
CLCAL1: SN2CL: WARNING: Will try to append new solutions to CL table 3
CLCAL1: SN2CL: This is because there are no entries for specified,
CLCAL1: SN2CL: TIMERANGE, SOURCE, SUBARRAY or FREQID in CL table 1
CLCAL1: SN2CL: WARNING: NO CL RECORDS WRITTEN
CLCAL1: Appears to have ended successfully
CLCAL1: galaxy 31DEC07 TST: Cpu= 0.1 Real= 0
AIPS 1: Resumes
>task 'uvplt'
>docal 1
>gainuse 2
>sour '0742+103''
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
AIPS 1: Resumes
>UVPLT1: PLTUV: 20857 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.5 Real= 1
sour '0740+38''
>gainuse 3
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
UVPLT1: Purports to die of UNNATURAL causes
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>docal -1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
UVPLT1: Purports to die of UNNATURAL causes
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>imh
AIPS 1: Image=MULTI (UV) Filename=19910811 .L BAND. 1
AIPS 1: Telescope=VLA Receiver=VLA
AIPS 1: Observer=AO105 User #= 3666
AIPS 1: Observ. date=11-AUG-1991 Map date=29-FEB-2008
AIPS 1: # visibilities 247723 Sort order TB
AIPS 1: Rand axes: UU-L-SIN VV-L-SIN WW-L-SIN BASELINE TIME1
AIPS 1: SOURCE FREQSEL
AIPS 1: ----------------------------------------------------------------
AIPS 1: Type Pixels Coord value at Pixel Coord incr Rotat
AIPS 1: COMPLEX 3 1.0000000E+00 1.00 1.0000000E+00 0.00
AIPS 1: STOKES 4 -1.0000000E+00 1.00 -1.0000000E+00 0.00
AIPS 1: FREQ 1 1.4649000E+09 1.00 5.0000000E+07 0.00
AIPS 1: IF 2 1.0000000E+00 1.00 1.0000000E+00 0.00
AIPS 1: RA 1 00 00 00.000 1.00 3600.000 0.00
AIPS 1: DEC 1 00 00 00.000 1.00 3600.000 0.00
AIPS 1: ----------------------------------------------------------------
AIPS 1: Coordinate equinox 1950.00
AIPS 1: Maximum version number of extension files of type HI is 1
AIPS 1: Maximum version number of extension files of type AN is 1
AIPS 1: Maximum version number of extension files of type NX is 1
AIPS 1: Maximum version number of extension files of type SU is 1
AIPS 1: Maximum version number of extension files of type FQ is 1
AIPS 1: Maximum version number of extension files of type CL is 3
AIPS 1: Maximum version number of extension files of type TY is 1
AIPS 1: Maximum version number of extension files of type WX is 1
AIPS 1: Maximum version number of extension files of type FG is 1
AIPS 1: Maximum version number of extension files of type SN is 1
AIPS 1: Keyword = 'CORRMODE' value = ' '
AIPS 1: Keyword = 'VLAIFS ' value = 'ABCD '
AIPS 1: Keyword = 'CORRCOEF' value = -1
>
>
>inp
AIPS 1: UVPLT Plots data from a u,v data base: multi-channel version
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 Data base owner number
AIPS 1: INNAME '19910811' Input UV file name (name)
AIPS 1: INCLASS 'L BAND' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1: SOURCES '0740+38' Sources to plot, ' '=>all.
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: STOKES ' ' Stokes type to select.
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID 1 Freq. ID to select.
AIPS 1: TIMERANG *all 0 Time range to select
AIPS 1: ANTENNAS *all 0 Antennas to plot
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: UVRANGE 0 0 UV range in kilolambda.
AIPS 1: SUBARRAY 0 Subarray, 0 => all
AIPS 1: BCHAN 1 1st spectral channel #
AIPS 1: ECHAN 0 Last spectral channel #
AIPS 1: CHINC 1 Increment in channel #
AIPS 1: BIF 1 Low IF number to plot
AIPS 1: EIF 2 Highest IF number to plot
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 3 CAL (CL or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 0 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER -1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1.
AIPS 1: BPARM *all 0 Control parameters
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#gainuse 0
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
UVPLT1: Purports to die of UNNATURAL causes
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>inp
AIPS 1: UVPLT Plots data from a u,v data base: multi-channel version
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 Data base owner number
AIPS 1: INNAME '19910811' Input UV file name (name)
AIPS 1: INCLASS 'L BAND' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1: SOURCES '0740+38' Sources to plot, ' '=>all.
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: STOKES ' ' Stokes type to select.
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID 1 Freq. ID to select.
AIPS 1: TIMERANG *all 0 Time range to select
AIPS 1: ANTENNAS *all 0 Antennas to plot
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: UVRANGE 0 0 UV range in kilolambda.
AIPS 1: SUBARRAY 0 Subarray, 0 => all
AIPS 1: BCHAN 1 1st spectral channel #
AIPS 1: ECHAN 0 Last spectral channel #
AIPS 1: CHINC 1 Increment in channel #
AIPS 1: BIF 1 Low IF number to plot
AIPS 1: EIF 2 Highest IF number to plot
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 0 CAL (CL or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 0 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER -1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1.
AIPS 1: BPARM *all 0 Control parameters
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: 1 : X-axis type 0=>UV dist
AIPS 1: 2 : Y-axis type 0=>Ampl
AIPS 1: 1=> amplitude (Jy)
AIPS 1: 2=> phase (degrees)
AIPS 1: 3=> uv dist. (klambda)
AIPS 1: 4=> uv p.a. (deg N->E)
AIPS 1: 5=> time (IAT days)
AIPS 1: 6=> u (klambda)
AIPS 1: 7=> v (klambda)
AIPS 1: 8=> w (klambda)
AIPS 1: 9=> Re(Vis) (Jy)
AIPS 1: 10=> Im(Vis) (Jy)
AIPS 1: 11=> time (IAT hours)
AIPS 1: 12=> log(ampl)
AIPS 1: 13=> weight
AIPS 1: 14=> HA (hours)
AIPS 1: 15=> elevation (deg)
AIPS 1: 16=> parallactic angle
AIPS 1: 17=> uv dist. (klambda)
AIPS 1: along p.a.
AIPS 1: 18=> azimuth (deg)
AIPS 1: 3 : > 0.0 => fixed scale
AIPS 1: < 0.0 => fixed range
AIPS 1: 4 : Xmin (fixed scale)
AIPS 1: 5 : Xmax (fixed scale)
AIPS 1: 6 : Ymin (fixed scale)
AIPS 1: 7 : Ymax (fixed scale)
AIPS 1: 8 : Number of bins in plot.
AIPS 1: 9 : > 0 => list bin values.
AIPS 1: 10: > 0 => plot auto-corr too
AIPS 1: BPARM=6,7,2,0 generates
AIPS 1: square UV coverage plots
AIPS 1: DOWEIGHT 1 > 0 use weights in binning
AIPS 1: REFANT 0 > 0 => use REFANT for plot
AIPS 1: types 14, 15, 16, 18
AIPS 1: ROTATE 0 uv p.a. for projection
AIPS 1: (deg N->E); type 17 only
AIPS 1: FACTOR 0 Scale dots by FACTOR
AIPS 1: < 0 => connect dots too
AIPS 1: DO3COL 0 > 0 use 3-color to separate
AIPS 1: channels and IFs.
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: LTYPE 3 Type of labeling: 1 border,
AIPS 1: 2 no ticks, 3 - 6 standard,
AIPS 1: 7 - 10 only tick labels
AIPS 1: <0 -> no date/time
AIPS 1: BADDISK *all 0 Disk to avoid for scratch.
AIPS 1: DOTV 1 > 0 Do plot on the TV, else
AIPS 1: make a plot file
AIPS 1: GRCHAN 0 Graphics channel 0 => 1.
>
>
>inp
AIPS 1: UVPLT Plots data from a u,v data base: multi-channel version
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 Data base owner number
AIPS 1: INNAME '19910811' Input UV file name (name)
AIPS 1: INCLASS 'L BAND' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1: SOURCES '0740+38' Sources to plot, ' '=>all.
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: STOKES ' ' Stokes type to select.
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID 1 Freq. ID to select.
AIPS 1: TIMERANG *all 0 Time range to select
AIPS 1: ANTENNAS *all 0 Antennas to plot
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: UVRANGE 0 0 UV range in kilolambda.
AIPS 1: SUBARRAY 0 Subarray, 0 => all
AIPS 1: BCHAN 1 1st spectral channel #
AIPS 1: ECHAN 0 Last spectral channel #
AIPS 1: CHINC 1 Increment in channel #
AIPS 1: BIF 1 Low IF number to plot
AIPS 1: EIF 2 Highest IF number to plot
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 0 CAL (CL or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 0 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER -1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1.
AIPS 1: BPARM *all 0 Control parameters
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: 1 : X-axis type 0=>UV dist
AIPS 1: 2 : Y-axis type 0=>Ampl
AIPS 1: 1=> amplitude (Jy)
AIPS 1: 2=> phase (degrees)
AIPS 1: 3=> uv dist. (klambda)
AIPS 1: 4=> uv p.a. (deg N->E)
AIPS 1: 5=> time (IAT days)
AIPS 1: 6=> u (klambda)
AIPS 1: 7=> v (klambda)
AIPS 1: 8=> w (klambda)
AIPS 1: 9=> Re(Vis) (Jy)
AIPS 1: 10=> Im(Vis) (Jy)
AIPS 1: 11=> time (IAT hours)
AIPS 1: 12=> log(ampl)
AIPS 1: 13=> weight
AIPS 1: 14=> HA (hours)
AIPS 1: 15=> elevation (deg)
AIPS 1: 16=> parallactic angle
AIPS 1: 17=> uv dist. (klambda)
AIPS 1: along p.a.
AIPS 1: 18=> azimuth (deg)
AIPS 1: 3 : > 0.0 => fixed scale
AIPS 1: < 0.0 => fixed range
AIPS 1: 4 : Xmin (fixed scale)
AIPS 1: 5 : Xmax (fixed scale)
AIPS 1: 6 : Ymin (fixed scale)
AIPS 1: 7 : Ymax (fixed scale)
AIPS 1: 8 : Number of bins in plot.
AIPS 1: 9 : > 0 => list bin values.
AIPS 1: 10: > 0 => plot auto-corr too
AIPS 1: BPARM=6,7,2,0 generates
AIPS 1: square UV coverage plots
AIPS 1: DOWEIGHT 1 > 0 use weights in binning
AIPS 1: REFANT 0 > 0 => use REFANT for plot
AIPS 1: types 14, 15, 16, 18
AIPS 1: ROTATE 0 uv p.a. for projection
AIPS 1: (deg N->E); type 17 only
AIPS 1: FACTOR 0 Scale dots by FACTOR
AIPS 1: < 0 => connect dots too
AIPS 1: DO3COL 0 > 0 use 3-color to separate
AIPS 1: channels and IFs.
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: LTYPE 3 Type of labeling: 1 border,
AIPS 1: 2 no ticks, 3 - 6 standard,
AIPS 1: 7 - 10 only tick labels
AIPS 1: <0 -> no date/time
AIPS 1: BADDISK *all 0 Disk to avoid for scratch.
AIPS 1: DOTV 1 > 0 Do plot on the TV, else
AIPS 1: make a plot file
AIPS 1: GRCHAN 0 Graphics channel 0 => 1.
>
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
UVPLT1: Purports to die of UNNATURAL causes
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>inp
AIPS 1: UVPLT Plots data from a u,v data base: multi-channel version
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 Data base owner number
AIPS 1: INNAME '19910811' Input UV file name (name)
AIPS 1: INCLASS 'L BAND' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1: SOURCES '0740+38' Sources to plot, ' '=>all.
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: STOKES ' ' Stokes type to select.
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID 1 Freq. ID to select.
AIPS 1: TIMERANG *all 0 Time range to select
AIPS 1: ANTENNAS *all 0 Antennas to plot
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: UVRANGE 0 0 UV range in kilolambda.
AIPS 1: SUBARRAY 0 Subarray, 0 => all
AIPS 1: BCHAN 1 1st spectral channel #
AIPS 1: ECHAN 0 Last spectral channel #
AIPS 1: CHINC 1 Increment in channel #
AIPS 1: BIF 1 Low IF number to plot
AIPS 1: EIF 2 Highest IF number to plot
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 0 CAL (CL or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 0 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER -1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1.
AIPS 1: BPARM *all 0 Control parameters
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#flagver -1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Doing no flagging this time
UVPLT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
UVPLT1: Purports to die of UNNATURAL causes
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>getn 1
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.X BAND.1
>zap
AIPS 1: Destroyed 1 extension files of type WX
AIPS 1: Destroyed 1 extension files of type TY
AIPS 1: Destroyed 1 extension files of type CL
AIPS 1: Destroyed 1 extension files of type FQ
AIPS 1: Destroyed 1 extension files of type SU
AIPS 1: Destroyed 1 extension files of type NX
AIPS 1: Destroyed 1 extension files of type AN
AIPS 1: Destroyed 1 extension files of type HI
AIPS 1: Destroyed UV image file: catno= 1 disk= 1
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>zap
AIPS 1: Destroyed 1 extension files of type SN
AIPS 1: Destroyed 1 extension files of type FG
AIPS 1: Destroyed 1 extension files of type WX
AIPS 1: Destroyed 1 extension files of type TY
AIPS 1: Destroyed 3 extension files of type CL
AIPS 1: Destroyed 1 extension files of type FQ
AIPS 1: Destroyed 1 extension files of type SU
AIPS 1: Destroyed 1 extension files of type NX
AIPS 1: Destroyed 1 extension files of type AN
AIPS 1: Destroyed 1 extension files of type HI
AIPS 1: Destroyed UV image file: catno= 2 disk= 1
>clrmsg
AIPS 1: User 3666 message file is empty
AIPS 1: Deleted 673 messages
>restore 0
>
>task 'fillm'
>infile 'fits:BIG_'
>indi 1
>outseq 0; outdi 1; DOUVCOMP -1; DOALL 1
>DOCONCAT 1; ncount 1; nfile 0
>go;wait
FILLM1: Task FILLM (release of 31DEC07) begins
FILLM1: ******************************************************
FILLM1: ** Times written by FILLM are now centered in **
FILLM1: ** the integration, before they were at the end **
FILLM1: ******************************************************
FILLM1: Shadow flag limit = 2.500E+01 meters.
FILLM1: Opacity correction in CL table weighted average of weather and
FILLM1: season. Weight for weather = 0.50
FILLM1: Gain curve correction in CL table read from file,
FILLM1: with variation as function of antenna and band.
FILLM1: Opening FITS:BIG_1
FILLM1: *** caution: CPARM(6) is 0 and VLAOBS is blank ***
FILLM1: ** subarray defaults to 1. It is recommended ***
FILLM1: *** to run FILLM with non-blank VLAOBS. ***
FILLM1: tape file # 1, start date/time = 19910811/20:56:20
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Program = AO105 ; Tape revision number = 24.
FILLM1: Create 19910811 .X BAND. 1 (UV) on disk 1 cno 1
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: FLMFQ: FQ entry tolerance = 1.000D+02 1.000D+02
FILLM1: Found 0742+103 : 0 50.000 MHz at IAT 0/ 20:56:15.0
FILLM1: Zenith opacity set to 0.010
FILLM1: Trying to access VLA antenna gains file...
FILLM1: ZTXOP2: using translated file name =
FILLM1: ZTXOP2: /home/aips/TEXT/IONS/VLA.GAINS
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Create 19910811 .L BAND. 1 (UV) on disk 1 cno 2
FILLM1: Ref. date = 19910811 A-C = 1.464900 B-D = 1.514900 GHz
FILLM1: Found 0742+103 : 0 50.000 MHz at IAT 0/ 21:01:45.0
AIPS 1: Resumes
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:05:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:14:45.0
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:18:15.0
FILLM1: Found 0742+318 : 0 50.000 MHz at IAT 0/ 21:25:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0740+38 : 0 50.000 MHz at IAT 0/ 21:39:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0751+298 : 0 50.000 MHz at IAT 0/ 21:49:25.0
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 22:04:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 22:07:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0802+10 : 0 50.000 MHz at IAT 0/ 22:10:25.0
FILLM1: Found 0824+29 : 0 50.000 MHz at IAT 0/ 22:20:15.0
FILLM1: Found 0858+29 : 0 50.000 MHz at IAT 0/ 22:44:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0858+29 : 0 50.000 MHz at IAT 0/ 22:49:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 0/ 22:56:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 0/ 23:00:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 23:04:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 23:11:05.0
FILLM1: Found 0906+43 : 0 50.000 MHz at IAT 0/ 23:13:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0906+43 : 0 50.000 MHz at IAT 0/ 23:21:05.0
FILLM1: Found 0850+581 : 0 50.000 MHz at IAT 0/ 23:31:25.0
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 0/ 23:55:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 1/ 00:07:35.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:17:45.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:21:15.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:21:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 00:32:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 00:41:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1148-001 : 0 50.000 MHz at IAT 1/ 00:53:55.0
FILLM1: Found 1217+02 : 0 50.000 MHz at IAT 1/ 00:58:15.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 01:24:15.0
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 1/ 01:27:55.0
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 01:40:25.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 01:50:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 01:55:15.0
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 02:00:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 02:06:15.0
FILLM1: Found 1350+31 : 0 50.000 MHz at IAT 1/ 02:11:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1350+31 : 0 50.000 MHz at IAT 1/ 02:15:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1144+402 : 0 50.000 MHz at IAT 1/ 02:20:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1144+402 : 0 50.000 MHz at IAT 1/ 02:24:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1150+497 : 0 50.000 MHz at IAT 1/ 02:28:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1143+50 : 0 50.000 MHz at IAT 1/ 02:53:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1143+50 : 0 50.000 MHz at IAT 1/ 03:02:45.0
FILLM1: Found 1203+64 : 0 50.000 MHz at IAT 1/ 03:12:55.0
FILLM1: Found 1216+487 : 0 50.000 MHz at IAT 1/ 03:18:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1216+487 : 0 50.000 MHz at IAT 1/ 03:22:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1254+47 : 0 50.000 MHz at IAT 1/ 03:25:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1254+47 : 0 50.000 MHz at IAT 1/ 03:39:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1258+40 : 0 50.000 MHz at IAT 1/ 03:48:05.0
FILLM1: Found 1317+52 : 0 50.000 MHz at IAT 1/ 04:16:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 04:45:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 04:52:35.0
FILLM1: Found 1419+41 : 0 50.000 MHz at IAT 1/ 04:57:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1419+41 : 0 50.000 MHz at IAT 1/ 05:06:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1416+06 : 0 50.000 MHz at IAT 1/ 05:17:05.0
FILLM1: Found 1532+016 : 0 50.000 MHz at IAT 1/ 05:26:55.0
FILLM1: Found 1540+18 : 0 50.000 MHz at IAT 1/ 05:34:45.0
FILLM1: Found 1641+17 : 0 50.000 MHz at IAT 1/ 05:56:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1641+17 : 0 50.000 MHz at IAT 1/ 06:10:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 06:22:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 06:28:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1323+65 : 0 50.000 MHz at IAT 1/ 06:33:15.0
FILLM1: Found 1345+584 : 0 50.000 MHz at IAT 1/ 06:52:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1345+584 : 0 50.000 MHz at IAT 1/ 07:07:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1347+539 : 0 50.000 MHz at IAT 1/ 07:17:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1347+539 : 0 50.000 MHz at IAT 1/ 07:32:05.0
FILLM1: Found 1358+624 : 0 50.000 MHz at IAT 1/ 07:42:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1358+624 : 0 50.000 MHz at IAT 1/ 07:46:55.0
FILLM1: Found 1443+77 : 0 50.000 MHz at IAT 1/ 07:50:15.0
FILLM1: Found 1447+77 : 0 50.000 MHz at IAT 1/ 07:54:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1447+77 : 0 50.000 MHz at IAT 1/ 07:59:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1458+71 : 0 50.000 MHz at IAT 1/ 08:09:35.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 08:15:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 08:22:15.0
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 08:26:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 08:38:15.0
FILLM1: Found 1857+56 : 0 50.000 MHz at IAT 1/ 08:53:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1828+48 : 0 50.000 MHz at IAT 1/ 09:07:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1828+48 : 0 50.000 MHz at IAT 1/ 09:19:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 09:32:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 09:43:35.0
FILLM1: Found 2037+51 : 0 50.000 MHz at IAT 1/ 09:58:45.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 10:14:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 10:21:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 10:25:35.0
FILLM1: Found 1857+56 : 0 50.000 MHz at IAT 1/ 10:40:35.0
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 10:55:15.0
FILLM1: Found 2037+51 : 0 50.000 MHz at IAT 1/ 11:10:15.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 11:25:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 11:32:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 2248+71 : 0 50.000 MHz at IAT 1/ 11:37:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 2252+12 : 0 50.000 MHz at IAT 1/ 11:43:15.0
FILLM1: Found 2223-05 : 0 50.000 MHz at IAT 1/ 11:51:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0017+15 : 0 50.000 MHz at IAT 1/ 11:59:25.0
FILLM1: Found 0037-01 : 0 50.000 MHz at IAT 1/ 12:11:35.0
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 12:26:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 12:29:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0127+23 : 0 50.000 MHz at IAT 1/ 12:32:15.0
FILLM1: Found 0221+27 : 0 50.000 MHz at IAT 1/ 12:36:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0221+27 : 0 50.000 MHz at IAT 1/ 12:41:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0017+15 : 0 50.000 MHz at IAT 1/ 12:52:35.0
FILLM1: Found 0037-01 : 0 50.000 MHz at IAT 1/ 13:05:35.0
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 13:19:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 13:22:45.0
FILLM1: Found 0658+38 : 0 50.000 MHz at IAT 1/ 13:28:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0658+38 : 0 50.000 MHz at IAT 1/ 13:29:45.0
FILLM1: Found 0538+498 : 0 50.000 MHz at IAT 1/ 13:35:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0710+439 : 0 50.000 MHz at IAT 1/ 13:40:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0710+439 : 0 50.000 MHz at IAT 1/ 13:44:25.0
FILLM1: Read 943481 visibilities from 1 files
FILLM1: Appears to have ended successfully
FILLM1: galaxy 31DEC07 TST: Cpu= 12.2 Real= 18
AIPS 1: Task FILLM has finished
>
>infile ''
>task 'uvplt'
>task 'uvflg'
>sour '0742+103''
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>getn 1
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.X BAND.1
>zap
AIPS 1: Destroyed 1 extension files of type WX
AIPS 1: Destroyed 1 extension files of type TY
AIPS 1: Destroyed 1 extension files of type CL
AIPS 1: Destroyed 1 extension files of type FQ
AIPS 1: Destroyed 1 extension files of type SU
AIPS 1: Destroyed 1 extension files of type NX
AIPS 1: Destroyed 1 extension files of type AN
AIPS 1: Destroyed 1 extension files of type HI
AIPS 1: Destroyed UV image file: catno= 1 disk= 1
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>anten 9
>baseline 25
>timer 00 21 02 50 00 21 03 00
>bif 1
>eif 1
>go
UVFLG1: Task UVFLG (release of 31DEC07) begins
UVFLG1: Wrote 1 flags to flag table version 1
UVFLG1: Appears to have ended successfully
UVFLG1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>task 'uvplt'
>dotv 1
>anten 0
>baseline 0
>timer 0
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 10433 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.2 Real= 0
sour '0740+38''
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 35354 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.8 Real= 2
task 'vplot'
>go
VPLOT1: Task VPLOT (release of 31DEC07) begins
VPLOT1: FQMATC: Setting FQ id number = 1
VPLOT1: UVGET: Using flag table version 1 to edit data
VPLOT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
VPLOT1: Appears to have ended successfully
VPLOT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>task 'setjy'
>stokes ''
>uvrange 0
>timer 0
>antenna 0
>baseline 0
>bif 1
>eif 2
>optype ''
>sour '0742+103''
>zerosp 3.30 0 0 0
>go
SETJY1: Task SETJY (release of 31DEC07) begins
SETJY1: FQMATC: Setting FQ id number = 1
SETJY1: BIF = 1 EIF = 2 /Range of IFs
SETJY1: SOURCES = '0742+103 ' / Included
SETJY1: ZEROSP = 3.300 0.000 0.000 0.000 /I,Q,U,V fluxes
SETJY1: Appears to have ended successfully
SETJY1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>task 'uvplt'
>sour '0740+38''
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 70714 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 1.6 Real= 4
>
>task 'vplot'
>go
VPLOT1: Task VPLOT (release of 31DEC07) begins
VPLOT1: FQMATC: Setting FQ id number = 1
VPLOT1: UVGET: Using flag table version 1 to edit data
VPLOT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
VPLOT1: Appears to have ended successfully
VPLOT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>task 'calib'
>freq 1
>aparm 0
>aparm(6) 2
>cparm 0
>cparm(5) 1
>solmode 'a&p'
>minamper 10
>minphser 10
>sour '0742+103''
>calsour sour
>go
CALIB1: Task CALIB (release of 31DEC07) begins
CALIB1: CALIB USING 19910811 . L BAND . 1 DISK= 1 USID=3666
CALIB1: UVGET: Using flag table version 1 to edit data
CALIB1: Selecting and editing the data
CALIB1: Doing cal transfer mode with point model for each source
CALIB1: This is not self-calibration
CALIB1: Dividing data by source flux densities
CALIB1: Determining solutions using amp-scalar averaging
CALIB1: Writing SN table 1
CALIB1: RPOL, IF= 1 The average gain over these antennas is 2.623E+00
CALIB1: RPOL, IF= 2 The average gain over these antennas is 2.587E+00
CALIB1: LPOL, IF= 1 The average gain over these antennas is 2.621E+00
CALIB1: LPOL, IF= 2 The average gain over these antennas is 2.589E+00
CALIB1: Found 76 good solutions
CALIB1: Average closure rms = 0.0017 +- 0.0001
CALIB1: No data were found > 99.0 rms from solution
CALIB1: Adjusting solutions to a common reference antenna
CALIB1: Appears to have ended successfully
CALIB1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>task 'uvplt'
>sour '0740+38''
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
UVPLT1: Purports to die of UNNATURAL causes
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>restore 0
>task 'uvplt'
>indi 1
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>sour '0740+38''
>dotv 1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 70714 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 1.5 Real= 3
task 'clcal'
>calcode ''
>freq 1
>opcode 'cali'
>snver 0
>interp '2pt'
>gainver 1
>gainuse 0
>snver 1
>sour '0742+103''
>calsour sour
>go
CLCAL1: Task CLCAL (release of 31DEC07) begins
CLCAL1: Using interpolation mode 2PT
CLCAL1: Copied CL file from vol/cno/vers 1 2 1 to 1 2 2
CLCAL1: Deleted 38 records from CL table no. 2
CLCAL1: Processing SN table 1
CLCAL1: SNMRG: Merging SN table
CLCAL1: SNMRG: Write 19 merged records from 19 input records
CLCAL1: SN2CL: Applying SN tables to CL table 1, writing CL table 2
CLCAL1: Appears to have ended successfully
CLCAL1: galaxy 31DEC07 TST: Cpu= 0.1 Real= 0
AIPS 1: Resumes
>sour '0740+38''
>go
CLCAL1: Task CLCAL (release of 31DEC07) begins
CLCAL1: Using interpolation mode 2PT
CLCAL1: Copied CL file from vol/cno/vers 1 2 1 to 1 2 3
CLCAL1: Processing SN table 1
CLCAL1: WARNING: SN table 1 has already been applied
CLCAL1: SNMRG: Merging SN table
CLCAL1: SNMRG: Write 19 merged records from 19 input records
CLCAL1: SN2CL: Applying SN tables to CL table 1, writing CL table 3
CLCAL1: SN2CL: WARNING: Will try to append new solutions to CL table 3
CLCAL1: SN2CL: This is because there are no entries for specified,
CLCAL1: SN2CL: TIMERANGE, SOURCE, SUBARRAY or FREQID in CL table 1
CLCAL1: SN2CL: WARNING: NO CL RECORDS WRITTEN
CLCAL1: Appears to have ended successfully
CLCAL1: galaxy 31DEC07 TST: Cpu= 0.1 Real= 0
AIPS 1: Resumes
>task 'uvplt'
>gainuse 3
>docal 1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
UVPLT1: Purports to die of UNNATURAL causes
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>restore 0
>task 'uvplt'
>indi 5
>getn 2
AIPS 1: Got(1) disk= 5 user=3666 type=MA 3C286_L.MODEL.1
>indi 1
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>dotv 1
>sour '0740+38''
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 70714 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 1.5 Real= 3
docal 1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>gainuse 3
>gUVPLT1: PLTUV: 70714 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 1.5 Real= 3
o
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 70714 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 1.7 Real= 4
docal -1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>docal 1UVPLT1: PLTUV: 70714 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 1.6 Real= 4
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 70714 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 1.6 Real= 3
getn 1
AIPS 1: CATALOG SLOT # 1 DOES NOT CONTAIN AN ENTRY
>zap
AIPS 1: Destroyed 1 extension files of type SN
AIPS 1: Destroyed 1 extension files of type FG
AIPS 1: Destroyed 1 extension files of type WX
AIPS 1: Destroyed 1 extension files of type TY
AIPS 1: Destroyed 3 extension files of type CL
AIPS 1: Destroyed 1 extension files of type FQ
AIPS 1: Destroyed 1 extension files of type SU
AIPS 1: Destroyed 1 extension files of type NX
AIPS 1: Destroyed 1 extension files of type AN
AIPS 1: Destroyed 1 extension files of type HI
AIPS 1: Destroyed UV image file: catno= 2 disk= 1
>clrmsg
AIPS 1: User 3666 message file is empty
AIPS 1: Deleted 693 messages
>restore 0
>
>task 'fillm'
>infile 'fits:BIG_'
>indi 1
>outseq 0; outdi 1; DOUVCOMP -1; DOALL 1
>DOCONCAT 1; ncount 1; nfile 0
>go;wait
FILLM1: Task FILLM (release of 31DEC07) begins
FILLM1: ******************************************************
FILLM1: ** Times written by FILLM are now centered in **
FILLM1: ** the integration, before they were at the end **
FILLM1: ******************************************************
FILLM1: Shadow flag limit = 2.500E+01 meters.
FILLM1: Opacity correction in CL table weighted average of weather and
FILLM1: season. Weight for weather = 0.50
FILLM1: Gain curve correction in CL table read from file,
FILLM1: with variation as function of antenna and band.
FILLM1: Opening FITS:BIG_1
FILLM1: *** caution: CPARM(6) is 0 and VLAOBS is blank ***
FILLM1: ** subarray defaults to 1. It is recommended ***
FILLM1: *** to run FILLM with non-blank VLAOBS. ***
FILLM1: tape file # 1, start date/time = 19910811/20:56:20
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Program = AO105 ; Tape revision number = 24.
FILLM1: Create 19910811 .X BAND. 1 (UV) on disk 1 cno 1
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: FLMFQ: FQ entry tolerance = 1.000D+02 1.000D+02
FILLM1: Found 0742+103 : 0 50.000 MHz at IAT 0/ 20:56:15.0
FILLM1: Zenith opacity set to 0.010
FILLM1: Trying to access VLA antenna gains file...
FILLM1: ZTXOP2: using translated file name =
FILLM1: ZTXOP2: /home/aips/TEXT/IONS/VLA.GAINS
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Create 19910811 .L BAND. 1 (UV) on disk 1 cno 2
FILLM1: Ref. date = 19910811 A-C = 1.464900 B-D = 1.514900 GHz
FILLM1: Found 0742+103 : 0 50.000 MHz at IAT 0/ 21:01:45.0
AIPS 1: Resumes
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:05:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:14:45.0
FILLM1: Found 0758+14 : 0 50.000 MHz at IAT 0/ 21:18:15.0
FILLM1: Found 0742+318 : 0 50.000 MHz at IAT 0/ 21:25:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0740+38 : 0 50.000 MHz at IAT 0/ 21:39:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0751+298 : 0 50.000 MHz at IAT 0/ 21:49:25.0
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 22:04:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 22:07:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0802+10 : 0 50.000 MHz at IAT 0/ 22:10:25.0
FILLM1: Found 0824+29 : 0 50.000 MHz at IAT 0/ 22:20:15.0
FILLM1: Found 0858+29 : 0 50.000 MHz at IAT 0/ 22:44:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0858+29 : 0 50.000 MHz at IAT 0/ 22:49:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 0/ 22:56:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 0/ 23:00:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 23:04:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0814+425 : 0 50.000 MHz at IAT 0/ 23:11:05.0
FILLM1: Found 0906+43 : 0 50.000 MHz at IAT 0/ 23:13:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0906+43 : 0 50.000 MHz at IAT 0/ 23:21:05.0
FILLM1: Found 0850+581 : 0 50.000 MHz at IAT 0/ 23:31:25.0
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 0/ 23:55:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 1/ 00:07:35.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:17:45.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:21:15.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 00:21:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 00:32:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 00:41:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1148-001 : 0 50.000 MHz at IAT 1/ 00:53:55.0
FILLM1: Found 1217+02 : 0 50.000 MHz at IAT 1/ 00:58:15.0
FILLM1: Found 1030+398 : 0 50.000 MHz at IAT 1/ 01:24:15.0
FILLM1: Found 1028+31 : 0 50.000 MHz at IAT 1/ 01:27:55.0
FILLM1: Found 1049+616 : 0 50.000 MHz at IAT 1/ 01:40:25.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 01:50:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 01:55:15.0
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 02:00:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 02:06:15.0
FILLM1: Found 1350+31 : 0 50.000 MHz at IAT 1/ 02:11:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1350+31 : 0 50.000 MHz at IAT 1/ 02:15:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1144+402 : 0 50.000 MHz at IAT 1/ 02:20:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1144+402 : 0 50.000 MHz at IAT 1/ 02:24:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1150+497 : 0 50.000 MHz at IAT 1/ 02:28:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1143+50 : 0 50.000 MHz at IAT 1/ 02:53:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1143+50 : 0 50.000 MHz at IAT 1/ 03:02:45.0
FILLM1: Found 1203+64 : 0 50.000 MHz at IAT 1/ 03:12:55.0
FILLM1: Found 1216+487 : 0 50.000 MHz at IAT 1/ 03:18:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1216+487 : 0 50.000 MHz at IAT 1/ 03:22:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1254+47 : 0 50.000 MHz at IAT 1/ 03:25:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1254+47 : 0 50.000 MHz at IAT 1/ 03:39:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1258+40 : 0 50.000 MHz at IAT 1/ 03:48:05.0
FILLM1: Found 1317+52 : 0 50.000 MHz at IAT 1/ 04:16:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 04:45:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1328+307 : 0 50.000 MHz at IAT 1/ 04:52:35.0
FILLM1: Found 1419+41 : 0 50.000 MHz at IAT 1/ 04:57:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1419+41 : 0 50.000 MHz at IAT 1/ 05:06:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1416+06 : 0 50.000 MHz at IAT 1/ 05:17:05.0
FILLM1: Found 1532+016 : 0 50.000 MHz at IAT 1/ 05:26:55.0
FILLM1: Found 1540+18 : 0 50.000 MHz at IAT 1/ 05:34:45.0
FILLM1: Found 1641+17 : 0 50.000 MHz at IAT 1/ 05:56:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1641+17 : 0 50.000 MHz at IAT 1/ 06:10:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 06:22:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 06:28:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1323+65 : 0 50.000 MHz at IAT 1/ 06:33:15.0
FILLM1: Found 1345+584 : 0 50.000 MHz at IAT 1/ 06:52:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1345+584 : 0 50.000 MHz at IAT 1/ 07:07:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1347+539 : 0 50.000 MHz at IAT 1/ 07:17:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1347+539 : 0 50.000 MHz at IAT 1/ 07:32:05.0
FILLM1: Found 1358+624 : 0 50.000 MHz at IAT 1/ 07:42:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1358+624 : 0 50.000 MHz at IAT 1/ 07:46:55.0
FILLM1: Found 1443+77 : 0 50.000 MHz at IAT 1/ 07:50:15.0
FILLM1: Found 1447+77 : 0 50.000 MHz at IAT 1/ 07:54:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1447+77 : 0 50.000 MHz at IAT 1/ 07:59:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1458+71 : 0 50.000 MHz at IAT 1/ 08:09:35.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 08:15:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 08:22:15.0
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 08:26:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 08:38:15.0
FILLM1: Found 1857+56 : 0 50.000 MHz at IAT 1/ 08:53:45.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1828+48 : 0 50.000 MHz at IAT 1/ 09:07:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1828+48 : 0 50.000 MHz at IAT 1/ 09:19:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 09:32:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 09:43:35.0
FILLM1: Found 2037+51 : 0 50.000 MHz at IAT 1/ 09:58:45.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 10:14:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 10:21:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 1642+69 : 0 50.000 MHz at IAT 1/ 10:25:35.0
FILLM1: Found 1857+56 : 0 50.000 MHz at IAT 1/ 10:40:35.0
FILLM1: Found 1939+60 : 0 50.000 MHz at IAT 1/ 10:55:15.0
FILLM1: Found 2037+51 : 0 50.000 MHz at IAT 1/ 11:10:15.0
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 11:25:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 1803+784 : 0 50.000 MHz at IAT 1/ 11:32:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 2248+71 : 0 50.000 MHz at IAT 1/ 11:37:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 2252+12 : 0 50.000 MHz at IAT 1/ 11:43:15.0
FILLM1: Found 2223-05 : 0 50.000 MHz at IAT 1/ 11:51:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0017+15 : 0 50.000 MHz at IAT 1/ 11:59:25.0
FILLM1: Found 0037-01 : 0 50.000 MHz at IAT 1/ 12:11:35.0
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 12:26:25.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 12:29:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0127+23 : 0 50.000 MHz at IAT 1/ 12:32:15.0
FILLM1: Found 0221+27 : 0 50.000 MHz at IAT 1/ 12:36:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0221+27 : 0 50.000 MHz at IAT 1/ 12:41:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0017+15 : 0 50.000 MHz at IAT 1/ 12:52:35.0
FILLM1: Found 0037-01 : 0 50.000 MHz at IAT 1/ 13:05:35.0
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 13:19:35.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0007+171 : 0 50.000 MHz at IAT 1/ 13:22:45.0
FILLM1: Found 0658+38 : 0 50.000 MHz at IAT 1/ 13:28:55.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0658+38 : 0 50.000 MHz at IAT 1/ 13:29:45.0
FILLM1: Found 0538+498 : 0 50.000 MHz at IAT 1/ 13:35:15.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 1.685100 B-D = 1.314900 GHz
FILLM1: Appending new data to: 19910811 .L BAND. 1 disk 1
FILLM1: Found 0710+439 : 0 50.000 MHz at IAT 1/ 13:40:05.0
FILLM1: MCINI: Processing Correlator Code ' ' with 19 antennas.
FILLM1: MCINI - Continuum, 2 compatible IFs
FILLM1: Ref. date = 19910811 A-C = 8.414900 B-D = 8.464900 GHz
FILLM1: Appending new data to: 19910811 .X BAND. 1 disk 1
FILLM1: Found 0710+439 : 0 50.000 MHz at IAT 1/ 13:44:25.0
FILLM1: Read 943481 visibilities from 1 files
FILLM1: Appears to have ended successfully
FILLM1: galaxy 31DEC07 TST: Cpu= 12.3 Real= 17
AIPS 1: Task FILLM has finished
>
>infile ''
>task 'listr'
>docrt 132
>optype 'scan'
>go prtan
PRTAN1: Task PRTAN (release of 31DEC07) begins
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:41:17 Page 1
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Array reference position in meters (Earth centered)
Array BX= -1601185.36500 BY= -5041977.54700 BZ= 3554875.87000
Polar X = 0.00000 Polar Y = 0.00000 arcsec
Earth rotation rate = 360.9856449734 degrees / IAT day
GST at UT=0 = 318.9583265404 degrees
UT1-UTC= 0.0000000 Data time(IAT )-UTC= 0.0000000 seconds
Solutions not yet determined for a particular FREQID
Ant 1 = VLA:_W32 BX= 1640.0303 BY= -4329.9413 BZ= -2416.7111
Mount=ALAZ Axis offset= 0.0016 meters IFA IFB
Feed polarization type = R L
Ant 2 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 3 = VLA:_W40 BX= 2394.9644 BY= -6350.0132 BZ= -3550.9950
Mount=ALAZ Axis offset= -0.0031 meters IFA IFB
Feed polarization type = R L
Ant 4 = VLA:_E32 BX= 1253.2485 BY= 4733.6062 BZ= -1816.9144
Mount=ALAZ Axis offset= 0.0094 meters IFA IFB
Feed polarization type = R L
Ant 5 = VLA:_E56 BX= 3241.9576 BY= 12366.0525 BZ= -4767.4403
Mount=ALAZ Axis offset= 0.0009 meters IFA IFB
Feed polarization type = R L
Ant 6 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 7 = VLA:_E72 BX= 4857.9229 BY= 19090.2649 BZ= -7275.8596
Mount=ALAZ Axis offset= -0.0026 meters IFA IFB
Feed polarization type = R L
Type Q to stop, just hit RETURN to continue
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:41:52 Page 2
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Ant 8 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 9 = VLA:_W8 BX= 152.7598 BY= -401.2719 BZ= -223.4041
Mount=ALAZ Axis offset= -0.0198 meters IFA IFB
Feed polarization type = R L
Ant 10 = VLA:_W24 BX= 1005.3810 BY= -2643.0135 BZ= -1472.2002
Mount=ALAZ Axis offset= 0.0001 meters IFA IFB
Feed polarization type = R L
Ant 11 = VLA:_W48 BX= 3275.1186 BY= -8682.4903 BZ= -4854.8593
Mount=ALAZ Axis offset= 0.0035 meters IFA IFB
Feed polarization type = R L
Ant 12 = VLA:_W72 BX= 6536.2763 BY= -17410.2065 BZ= -9755.5520
Mount=ALAZ Axis offset= -0.0005 meters IFA IFB
Feed polarization type = R L
Ant 13 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 14 = VLA:_E48 BX= 2495.7779 BY= 9491.9194 BZ= -3654.6917
Mount=ALAZ Axis offset= -0.0005 meters IFA IFB
Feed polarization type = R L
Ant 15 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 16 = VLA:_E24 BX= 765.2220 BY= 2889.4355 BZ= -1108.9018
Mount=ALAZ Axis offset= -0.0051 meters IFA IFB
Feed polarization type = R L
Type Q to stop, just hit RETURN to continue
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:41:52 Page 3
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Ant 17 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 18 = VLA:_E40 BX= 1836.9571 BY= 6942.0838 BZ= -2665.2267
Mount=ALAZ Axis offset= -0.0009 meters IFA IFB
Feed polarization type = R L
Ant 19 = VLA:_W56 BX= 4258.9960 BY= -11311.4948 BZ= -6330.0386
Mount=ALAZ Axis offset= -0.0034 meters IFA IFB
Feed polarization type = R L
Ant 20 = VLA:_W64 BX= 5349.1574 BY= -14224.3403 BZ= -7964.5005
Mount=ALAZ Axis offset= 0.0041 meters IFA IFB
Feed polarization type = R L
Ant 21 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 22 = VLA:_E64 BX= 4083.2246 BY= 15550.4438 BZ= -5990.5045
Mount=ALAZ Axis offset= 0.0021 meters IFA IFB
Feed polarization type = R L
Ant 23 = VLA:_E8 BX= 114.4367 BY= 438.6857 BZ= -169.4932
Mount=ALAZ Axis offset= -0.0012 meters IFA IFB
Feed polarization type = R L
Ant 24 = VLA:_E16 BX= 376.9957 BY= 1440.9897 BZ= -556.1199
Mount=ALAZ Axis offset= 0.0009 meters IFA IFB
Feed polarization type = R L
Ant 25 = VLA:_N16 BX= -801.3978 BY= -124.9821 BZ= 1182.1121
Mount=ALAZ Axis offset= -0.0027 meters IFA IFB
Feed polarization type = R L
Type Q to stop, just hit RETURN to continue
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:41:52 Page 4
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Ant 26 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 27 = VLA:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Ant 28 = VLA:_W16 BX= 499.8364 BY= -1317.9858 BZ= -735.2141
Mount=ALAZ Axis offset= -0.0029 meters IFA IFB
Feed polarization type = R L
Ant 29 = VPT:_OUT BX= 0.0000 BY= 0.0000 BZ= 0.0000
Mount=ALAZ Axis offset= 0.0000 meters IFA IFB
Feed polarization type = R L
Type Q to stop, just hit RETURN to continue
galaxy PRTAN(31DEC07) 3666 29-FEB-2008 15:41:52 Page 5
File=19910811 .X BAND. 1 An.ver= 1 Vol= 1 User= 3666
Array= VLA Freq= 8414.900000 MHz Ref.date= 11-AUG-1991
Location Of VLA Antennas
N16 (25)
( 9) W8 E8 (23)
(28) W16 E16 (24)
(10) W24 E24 (16)
( 1) W32 E32 ( 4)
( 3) W40 E40 (18)
(11) W48 E48 (14)
(19) W56 E56 ( 5)
(20) W64 E64 (22)
(12) W72 E72 ( 7)
VLA:_OUT ( 2)
VLA:_OUT ( 6)
VLA:_OUT ( 8)
VLA:_OUT (13)
VLA:_OUT (15)
VLA:_OUT (17)
VLA:_OUT (21)
VLA:_OUT (26)
VLA:_OUT (27)
VPT:_OUT (29)
PRTAN1: Appears to have ended successfully
PRTAN1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 35
AIPS 1: Resumes
>
>
>
>
>refant 25
>indi 1
>pcat
AIPS 1: Catalog on disk 1
AIPS 1: Cat Usid Mapname Class Seq Pt Last access Stat
AIPS 1: 1 3666 19910811 .X BAND. 1 UV 29-FEB-2008 15:41:17
AIPS 1: 2 3666 19910811 .L BAND. 1 UV 29-FEB-2008 15:41:17
>getn 1
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.X BAND.1
>zap
AIPS 1: Destroyed 1 extension files of type WX
AIPS 1: Destroyed 1 extension files of type TY
AIPS 1: Destroyed 1 extension files of type CL
AIPS 1: Destroyed 1 extension files of type FQ
AIPS 1: Destroyed 1 extension files of type SU
AIPS 1: Destroyed 1 extension files of type NX
AIPS 1: Destroyed 1 extension files of type AN
AIPS 1: Destroyed 1 extension files of type HI
AIPS 1: Destroyed UV image file: catno= 1 disk= 1
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>refant 25
>task 'uvflg'
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>
>task 'uvflg'
>sour '0742+103''
>anten 9
>baseline 25
>bif 1
>eif 1
>timer 00 21 02 50 00 21 03 00
>go;wait
UVFLG1: Task UVFLG (release of 31DEC07) begins
UVFLG1: Wrote 1 flags to flag table version 1
UVFLG1: Appears to have ended successfully
UVFLG1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
AIPS 1: UVFLG was not found to be running
>
>anten 0
>baseline 0
>timer 0
>task 'uvplt'
>dotv 1
>go;wait
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
UVPLT1: PLTUV: 10433 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.2 Real= 1
AIPS 1: Task UVPLT has finished
>go;wait
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
UVPLT1: PLTUV: 10433 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.2 Real= 1
AIPS 1: Task UVPLT has finished
>sour '0740+38''
>go;wait
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
UVPLT1: PLTUV: 35354 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.8 Real= 1
AIPS 1: Task UVPLT has finished
>inp
AIPS 1: UVPLT Plots data from a u,v data base: multi-channel version
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 Data base owner number
AIPS 1: INNAME '19910811' Input UV file name (name)
AIPS 1: INCLASS 'L BAND' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1: SOURCES '0740+38' Sources to plot, ' '=>all.
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: STOKES ' ' Stokes type to select.
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: TIMERANG *all 0 Time range to select
AIPS 1: ANTENNAS *all 0 Antennas to plot
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: UVRANGE 0 0 UV range in kilolambda.
AIPS 1: SUBARRAY 0 Subarray, 0 => all
AIPS 1: BCHAN 1 1st spectral channel #
AIPS 1: ECHAN 0 Last spectral channel #
AIPS 1: CHINC 1 Increment in channel #
AIPS 1: BIF 1 Low IF number to plot
AIPS 1: EIF 1 Highest IF number to plot
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 0 CAL (CL or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 0 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER -1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1.
AIPS 1: BPARM *all 0 Control parameters
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: 1 : X-axis type 0=>UV dist
AIPS 1: 2 : Y-axis type 0=>Ampl
AIPS 1: 1=> amplitude (Jy)
AIPS 1: 2=> phase (degrees)
AIPS 1: 3=> uv dist. (klambda)
AIPS 1: 4=> uv p.a. (deg N->E)
AIPS 1: 5=> time (IAT days)
AIPS 1: 6=> u (klambda)
AIPS 1: 7=> v (klambda)
AIPS 1: 8=> w (klambda)
AIPS 1: 9=> Re(Vis) (Jy)
AIPS 1: 10=> Im(Vis) (Jy)
AIPS 1: 11=> time (IAT hours)
AIPS 1: 12=> log(ampl)
AIPS 1: 13=> weight
AIPS 1: 14=> HA (hours)
AIPS 1: 15=> elevation (deg)
AIPS 1: 16=> parallactic angle
AIPS 1: 17=> uv dist. (klambda)
AIPS 1: along p.a.
AIPS 1: 18=> azimuth (deg)
AIPS 1: 3 : > 0.0 => fixed scale
AIPS 1: < 0.0 => fixed range
AIPS 1: 4 : Xmin (fixed scale)
AIPS 1: 5 : Xmax (fixed scale)
AIPS 1: 6 : Ymin (fixed scale)
AIPS 1: 7 : Ymax (fixed scale)
AIPS 1: 8 : Number of bins in plot.
AIPS 1: 9 : > 0 => list bin values.
AIPS 1: 10: > 0 => plot auto-corr too
AIPS 1: BPARM=6,7,2,0 generates
AIPS 1: square UV coverage plots
AIPS 1: DOWEIGHT 1 > 0 use weights in binning
AIPS 1: REFANT 25 > 0 => use REFANT for plot
AIPS 1: types 14, 15, 16, 18
AIPS 1: ROTATE 0 uv p.a. for projection
AIPS 1: (deg N->E); type 17 only
AIPS 1: FACTOR 0 Scale dots by FACTOR
AIPS 1: < 0 => connect dots too
AIPS 1: DO3COL 0 > 0 use 3-color to separate
AIPS 1: channels and IFs.
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: LTYPE 3 Type of labeling: 1 border,
AIPS 1: 2 no ticks, 3 - 6 standard,
AIPS 1: 7 - 10 only tick labels
AIPS 1: <0 -> no date/time
AIPS 1: BADDISK *all 0 Disk to avoid for scratch.
AIPS 1: DOTV 1 > 0 Do plot on the TV, else
AIPS 1: make a plot file
AIPS 1: GRCHAN 0 Graphics channel 0 => 1.
>pcat
AIPS 1: Catalog on disk 1
AIPS 1: Cat Usid Mapname Class Seq Pt Last access Stat
AIPS 1: 2 3666 19910811 .L BAND. 1 UV 29-FEB-2008 15:43:45
>
>inp
AIPS 1: UVPLT Plots data from a u,v data base: multi-channel version
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 Data base owner number
AIPS 1: INNAME '19910811' Input UV file name (name)
AIPS 1: INCLASS 'L BAND' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1: SOURCES '0740+38' Sources to plot, ' '=>all.
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: STOKES ' ' Stokes type to select.
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: TIMERANG *all 0 Time range to select
AIPS 1: ANTENNAS *all 0 Antennas to plot
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: UVRANGE 0 0 UV range in kilolambda.
AIPS 1: SUBARRAY 0 Subarray, 0 => all
AIPS 1: BCHAN 1 1st spectral channel #
AIPS 1: ECHAN 0 Last spectral channel #
AIPS 1: CHINC 1 Increment in channel #
AIPS 1: BIF 1 Low IF number to plot
AIPS 1: EIF 1 Highest IF number to plot
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 0 CAL (CL or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 0 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER -1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1.
AIPS 1: BPARM *all 0 Control parameters
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: 1 : X-axis type 0=>UV dist
AIPS 1: 2 : Y-axis type 0=>Ampl
AIPS 1: 1=> amplitude (Jy)
AIPS 1: 2=> phase (degrees)
AIPS 1: 3=> uv dist. (klambda)
AIPS 1: 4=> uv p.a. (deg N->E)
AIPS 1: 5=> time (IAT days)
AIPS 1: 6=> u (klambda)
AIPS 1: 7=> v (klambda)
AIPS 1: 8=> w (klambda)
AIPS 1: 9=> Re(Vis) (Jy)
AIPS 1: 10=> Im(Vis) (Jy)
AIPS 1: 11=> time (IAT hours)
AIPS 1: 12=> log(ampl)
AIPS 1: 13=> weight
AIPS 1: 14=> HA (hours)
AIPS 1: 15=> elevation (deg)
AIPS 1: 16=> parallactic angle
AIPS 1: 17=> uv dist. (klambda)
AIPS 1: along p.a.
AIPS 1: 18=> azimuth (deg)
AIPS 1: 3 : > 0.0 => fixed scale
AIPS 1: < 0.0 => fixed range
AIPS 1: 4 : Xmin (fixed scale)
AIPS 1: 5 : Xmax (fixed scale)
AIPS 1: 6 : Ymin (fixed scale)
AIPS 1: 7 : Ymax (fixed scale)
AIPS 1: 8 : Number of bins in plot.
AIPS 1: 9 : > 0 => list bin values.
AIPS 1: 10: > 0 => plot auto-corr too
AIPS 1: BPARM=6,7,2,0 generates
AIPS 1: square UV coverage plots
AIPS 1: DOWEIGHT 1 > 0 use weights in binning
AIPS 1: REFANT 25 > 0 => use REFANT for plot
AIPS 1: types 14, 15, 16, 18
AIPS 1: ROTATE 0 uv p.a. for projection
AIPS 1: (deg N->E); type 17 only
AIPS 1: FACTOR 0 Scale dots by FACTOR
AIPS 1: < 0 => connect dots too
AIPS 1: DO3COL 0 > 0 use 3-color to separate
AIPS 1: channels and IFs.
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: LTYPE 3 Type of labeling: 1 border,
AIPS 1: 2 no ticks, 3 - 6 standard,
AIPS 1: 7 - 10 only tick labels
AIPS 1: <0 -> no date/time
AIPS 1: BADDISK *all 0 Disk to avoid for scratch.
AIPS 1: DOTV 1 > 0 Do plot on the TV, else
AIPS 1: make a plot file
AIPS 1: GRCHAN 0 Graphics channel 0 => 1.
>
>inp
AIPS 1: UVPLT Plots data from a u,v data base: multi-channel version
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: USERID 0 Data base owner number
AIPS 1: INNAME '19910811' Input UV file name (name)
AIPS 1: INCLASS 'L BAND' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1: SOURCES '0740+38' Sources to plot, ' '=>all.
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: STOKES ' ' Stokes type to select.
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID -1 Freq. ID to select.
AIPS 1: TIMERANG *all 0 Time range to select
AIPS 1: ANTENNAS *all 0 Antennas to plot
AIPS 1: BASELINE *all 0 Baselines with ANTENNAS
AIPS 1: UVRANGE 0 0 UV range in kilolambda.
AIPS 1: SUBARRAY 0 Subarray, 0 => all
AIPS 1: BCHAN 1 1st spectral channel #
AIPS 1: ECHAN 0 Last spectral channel #
AIPS 1: CHINC 1 Increment in channel #
AIPS 1: BIF 1 Low IF number to plot
AIPS 1: EIF 1 Highest IF number to plot
AIPS 1: DOCALIB -1 > 0 calibrate data & weights
AIPS 1: > 99 do NOT calibrate weights
AIPS 1: GAINUSE 0 CAL (CL or SN) table to apply
AIPS 1: DOPOL -1 If >0 correct polarization.
AIPS 1: BLVER -1 BL table to apply.
AIPS 1: FLAGVER 0 Flag table version
AIPS 1: DOBAND -1 If >0 apply bandpass cal.
AIPS 1: Method used depends on value
AIPS 1: of DOBAND (see HELP file).
AIPS 1: BPVER -1 Bandpass table version
AIPS 1: SMOOTH *all 0 Smoothing function. See
AIPS 1: HELP SMOOTH for details.
AIPS 1: XINC 1 Plot every XINC'th visibility
AIPS 1: 0 => 1.
AIPS 1: BPARM *all 0 Control parameters
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#restore 0
>indi 1
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>
>anten 0
>baseline 0
>timer 0
>task 'uvplt'
>sour '0740+38''
>go;wait
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
UVPLT1: GFINIS: number records used 3332
UVPLT1: PLTUV: 70714 Points plotted
UVPLT1: PLTUV: Plot file version 1 created.
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.1 Real= 0
AIPS 1: Resumes
AIPS 1: UVPLT was not found to be running
>dotv 1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 70714 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 1.7 Real= 3
task 'setjy'
>stokes ''
>uvrange 0
>timer 0
>antenna 0
>baseline 0
>bif 1
>eif 2
>sour '0742+103''
>zerosp 3.30 0 0 0
>go;wait
SETJY1: Task SETJY (release of 31DEC07) begins
SETJY1: FQMATC: Setting FQ id number = 1
SETJY1: BIF = 1 EIF = 2 /Range of IFs
SETJY1: SOURCES = '0742+103 ' / Included
SETJY1: ZEROSP = 3.300 0.000 0.000 0.000 /I,Q,U,V fluxes
SETJY1: Appears to have ended successfully
SETJY1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
AIPS 1: SETJY was not found to be running
>task 'calib'
>freq 1
>aparm 0
>aparm(6) 2
>cparm 0
>cparm(5) 1
>solmode 'a&p'
>minamper 10
>minphser 10
>calsour sour
>go;wait
CALIB1: Task CALIB (release of 31DEC07) begins
CALIB1: CALIB USING 19910811 . L BAND . 1 DISK= 1 USID=3666
CALIB1: UVGET: Using flag table version 1 to edit data
CALIB1: Selecting and editing the data
CALIB1: Doing cal transfer mode with point model for each source
CALIB1: This is not self-calibration
CALIB1: Dividing data by source flux densities
CALIB1: Determining solutions using amp-scalar averaging
CALIB1: Writing SN table 1
CALIB1: RPOL, IF= 1 The average gain over these antennas is 2.623E+00
CALIB1: RPOL, IF= 2 The average gain over these antennas is 2.587E+00
CALIB1: LPOL, IF= 1 The average gain over these antennas is 2.621E+00
CALIB1: LPOL, IF= 2 The average gain over these antennas is 2.589E+00
CALIB1: Found 76 good solutions
CALIB1: Average closure rms = 0.0017 +- 0.0001
CALIB1: No data were found > 99.0 rms from solution
CALIB1: Adjusting solutions to a common reference antenna
CALIB1: Appears to have ended successfully
CALIB1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
AIPS 1: CALIB was not found to be running
>task 'clcal'
>calcode ''
>freq 1
>opcode 'cali'
>snver 0
>interp '2pt'
>gainver 1
>gainuse 0
>snver 1
>go;wait
CLCAL1: Task CLCAL (release of 31DEC07) begins
CLCAL1: Using interpolation mode 2PT
CLCAL1: Copied CL file from vol/cno/vers 1 2 1 to 1 2 2
CLCAL1: Deleted 38 records from CL table no. 2
CLCAL1: Processing SN table 1
CLCAL1: SNMRG: Merging SN table
CLCAL1: SNMRG: Write 19 merged records from 19 input records
CLCAL1: SN2CL: Applying SN tables to CL table 1, writing CL table 2
CLCAL1: Appears to have ended successfully
CLCAL1: galaxy 31DEC07 TST: Cpu= 0.1 Real= 0
AIPS 1: Resumes
AIPS 1: CLCAL was not found to be running
>sour '0740+38''
>go;wait
CLCAL1: Task CLCAL (release of 31DEC07) begins
CLCAL1: Using interpolation mode 2PT
CLCAL1: Copied CL file from vol/cno/vers 1 2 1 to 1 2 3
CLCAL1: Processing SN table 1
CLCAL1: WARNING: SN table 1 has already been applied
CLCAL1: SNMRG: Merging SN table
CLCAL1: SNMRG: Write 19 merged records from 19 input records
CLCAL1: SN2CL: Applying SN tables to CL table 1, writing CL table 3
CLCAL1: SN2CL: WARNING: Will try to append new solutions to CL table 3
CLCAL1: SN2CL: This is because there are no entries for specified,
CLCAL1: SN2CL: TIMERANGE, SOURCE, SUBARRAY or FREQID in CL table 1
CLCAL1: SN2CL: WARNING: NO CL RECORDS WRITTEN
CLCAL1: Appears to have ended successfully
CLCAL1: galaxy 31DEC07 TST: Cpu= 0.1 Real= 0
AIPS 1: Resumes
AIPS 1: CLCAL was not found to be running
>task 'uvplt'
>sour '0742+103''
>gainuse 2
>docal 1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
AIPS 1: Resumes
>UVPLT1: PLTUV: 20857 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.5 Real= 1
docal -1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
AIPS 1: Resumes
>UVPLT1: PLTUV: 20857 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.5 Real= 1
docal 1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
AIPS 1: Resumes
>UVPLT1: PLTUV: 20857 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.5 Real= 2
sour '0740+38''
>gainuse 3
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
UVPLT1: Purports to die of UNNATURAL causes
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>restore 0
>indi 1
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>task 'uvplt'
>sour '0740+38''
>dotv 1
>gainuse 3
>docal 1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 70714 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 1.5 Real= 3
inext 'cl'
>invers 0
>extdest
AIPS 1: Extension file type CL version 3 deleted
>task 'clcal'
>calcode ''
>freq 1
>opcode 'cali'
>snver 0
>interp '2pt'
>gainver 1
>gainuse 0
>snver 1
>calsour '0742+103''
>sour '0740+38''
>inp
AIPS 1: CLCAL Task to manage SN and CL calibration tables
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: INNAME '19910811' Input UV file name (name)
AIPS 1: INCLASS 'L BAND' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 1 Input UV file disk unit #
AIPS 1: SOURCES '0740+38' Source list to calibrate
AIPS 1: *rest ' '
AIPS 1: SOUCODE ' ' Source "Cal codes"
AIPS 1: CALSOUR '0742+103' Cal sources for calibration
AIPS 1: *rest ' '
AIPS 1: QUAL -1 Source qualifier -1=>all
AIPS 1: CALCODE ' ' Calibrator code ' '=>all
AIPS 1: TIMERANG *all 0 Time range to calibrate
AIPS 1: SUBARRAY 0 Subarray, 0=>all,
AIPS 1: ANTENNAS *all 0 Antennas selected, 0=> all
AIPS 1: SELBAND -1 Bandwidth to select (kHz)
AIPS 1: SELFREQ -1 Frequency to select (MHz)
AIPS 1: FREQID 1 Freq. ID to select.
AIPS 1: OPCODE 'CALI' Operation 'MERG','CALI',
AIPS 1: 'CALP'; ' ' => 'CALI'
AIPS 1: INTERPOL '2PT' Interpolation function,
AIPS 1: choices are: '2PT','SIMP',
AIPS 1: 'AMBG','CUBE','SELF','POLY',
AIPS 1: 'SELN'; see HELP for details
AIPS 1: CUTOFF 0 Interpolation limit in
AIPS 1: time (min); 0=> no limit.
AIPS 1: SAMPTYPE ' ' Smoothing function
AIPS 1: BPARM *all 0 Smoothing parameters
AIPS 1: ICUT 0.1 Cutoff for functional forms
AIPS 1: DOBLANK 0 Blanked value interpolation
AIPS 1: DOBTWEEN 1 > 0 -> smooth all sources
AIPS 1: together; else separate them
AIPS 1: SMOTYPE ' ' Data to smooth
AIPS 1: SNVER 1 Input SN table, 0=>all.
AIPS 1: INVERS 0 Upper SN table vers in a
AIPS 1: range. 0=>SNVER
AIPS 1: GAINVER 1 Input Cal table 0=>high
AIPS 1: GAINUSE 0 Output CAL table 0=>high+1
AIPS 1: REFANT 0 Reference antenna 0=>pick.
AIPS 1: ** press RETURN for more, enter Q or next line to quit print **
#
AIPS 1: BADDISK *all 0 Disks to avoid for scratch
>
>
>go
CLCAL1: Task CLCAL (release of 31DEC07) begins
CLCAL1: Using interpolation mode 2PT
CLCAL1: Copied CL file from vol/cno/vers 1 2 1 to 1 2 3
CLCAL1: Processing SN table 1
CLCAL1: WARNING: SN table 1 has already been applied
CLCAL1: SNMRG: Merging SN table
CLCAL1: SNMRG: Write 19 merged records from 19 input records
CLCAL1: SN2CL: Applying SN tables to CL table 1, writing CL table 3
CLCAL1: SN2CL: WARNING: Will try to append new solutions to CL table 3
CLCAL1: SN2CL: This is because there are no entries for specified,
CLCAL1: SN2CL: TIMERANGE, SOURCE, SUBARRAY or FREQID in CL table 1
CLCAL1: SN2CL: WARNING: NO CL RECORDS WRITTEN
CLCAL1: Appears to have ended successfully
CLCAL1: galaxy 31DEC07 TST: Cpu= 0.1 Real= 0
AIPS 1: Resumes
>task 'uvplt'
>docal 1
>gainuse 3
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: FOUND 0 POINTS: NOT ENOUGH TO SELF-SCALE
UVPLT1: Purports to die of UNNATURAL causes
UVPLT1: galaxy 31DEC07 TST: Cpu= 0.0 Real= 0
AIPS 1: Resumes
>restore 0
>indi 1
>getn 2
AIPS 1: Got(1) disk= 1 user=3666 type=UV 19910811.L BAND.1
>task 'uvplt'
>dotv 1
>sour '0740+38''
>gainuse 3
>docal 1
>go
UVPLT1: Task UVPLT (release of 31DEC07) begins
UVPLT1: Plotting 2 frequency IDs.
UVPLT1: Processing FREQID = 1
UVPLT1: UVGET: Using flag table version 1 to edit data
UVPLT1: Processing FREQID = 2
AIPS 1: Resumes
>UVPLT1: PLTUV: 70714 Points plotted
UVPLT1: Appears to have ended successfully
UVPLT1: galaxy 31DEC07 TST: Cpu= 1.7 Real= 3
More information about the Daip
mailing list