[daip] 31DEC09 LINUX midnite job (dave, 20081227.044446)

[aipsmgr at nrao.edu]

dave update report for 31DEC09 on Sat Dec 27 04:45:10 UTC 2008 (UT)

Copies and compiles:

AIPSUPD - Using CVS for copying files.
UPDCVS - cvs copy of 31DEC09 begun, 1st character means
 - U added, P updated, M your file differs from master
 - C you have a changed file needing work (error!)
 - ? you have a file not on the master (ignore)
? 31DEC09/SUL/SYSTEM/NRAOAOC
U 31DEC09/TIMESTAMP
P 31DEC09/APL/PGM/NOTST/ACFIT.FOR
P 31DEC09/APL/PGM/NOTST/VBGLU.FOR
P 31DEC09/HIST/CHANGE.DOC
P 31DEC09/UPDATE/COMLNK.UPD
U 31DEC09/UPDATE/COMLNK.UPD.SUM
U 31DEC09/UPDATE/LASTCVS.DAT
P 31DEC09/UPDATE/PUTBCK.UPD
U 31DEC09/UPDATE/PUTBCK.UPD.SUM
P 31DEC09/UPDATE/REASONS.UPD
U 31DEC09/UPDATE/REASONS.UPD.SUM
UPDCVS - cvs update of 31DEC09 completed
UPDCVS - cvs update of TEXT completed
AIPSUPD - UPDCVS apparently worked

UPDCONTROL - /home/AIPS/31DEC09/LINUX/UPDATE/LASTREMOVE.DAT = 20081226.044334
UPDCONTROL - /home/AIPS/31DEC09/LINUX/UPDATE/LASTCOPY.DAT = 20081226.044334
UPDCONTROL - /home/AIPS/31DEC09/LINUX/UPDATE/LASTCOMRPL.DAT = 20081226.044334
UPDCONTROL - /home/AIPS/31DEC09/LINUX/UPDATE/LASTCOMLNK.DAT = 20081226.044334

UPDCONTROL - Everything seems in order

UPDCOMRPL: COMRPLs


UPDCOMRPL: currently in /home/AIPS/31DEC09/LINUX/UPDATE

UPDCOMLNK: COMLNKs

26-DEC-2008 23:34:18 20081226 TST APGNOT   ACFIT.FOR     egreisen
26-DEC-2008 22:41:55 20081226 TST APGNOT   VBGLU.FOR     egreisen

UPDCOMLNK: currently in /home/AIPS/31DEC09/LINUX/UPDATE
UPDCOMLNK: /home/AIPS/31DEC09/APL/PGM/NOTST/ACFIT.FOR
UPDCOMLNK: /home/AIPS/31DEC09/APL/PGM/NOTST/VBGLU.FOR


UPDCONTROL - Reasons for file updates on Sat Dec 27 04:44:58 UTC 2008 (UT)

26-DEC-2008 22:41:43 20081226 TST APGNOT   VBGLU.FOR     addressing problem
26-DEC-2008 22:50:06 20081226 TST HIST     CHANGE.DOC    vbglu etc
26-DEC-2008 23:34:00 20081226 TST HIST     CHANGE.DOC    acfit
26-DEC-2008 23:34:07 20081226 TST APGNOT   ACFIT.FOR     wrong variable used

CHANGE.DOC entries:

12774.  December 24, 2008            UVCOP                Eric
        When ANTEN = 2,0; BASELIN=8,0, it copied baseline 2-8 as
        expected but also copied 2-2 if DOACOR.  Droped the code that
        allowed this.  If you want that result, set BASELINE=2,8.
        Moved nowhere.

12775.  December 24, 2008            UVDIF                Eric
        The CLIP only subroutine had an erroneous subscript KK rather
        than K which caused it not to find bad amplitudes although it
        reported them in the max difference over max flux value.
        Moved to 31DEC08 this date.

12776.  December 24, 2008        imaging problem          Eric
        The change that allowed subimages to be padded out and used
        for modeling has caused nasty problems with non-3D imaging
        (i.e. de Sade's principle).  Changed:
        GRDAT      to call IMGSIZ to set FLDSZ only on DO3D true
        SETGDS     to defer the setting of FLDSZ until the full set of
                   images are examinined and the DO3D value
                   determined.  Saves the IMGSIZ outputs and the image
                   size values in a temp array for this.
        Must move to 31DEC08 but this should delay a final freeze!

12777.  December 26, 2008           VBGLU                 Eric
        The task had 3 main problems:
        1. When disk I/O had to be restarted because the required UV
        record preceded the ones in RAM, the task checked a few of the
        upcoming records to find the minimum needed input record
        number.  Thus the first record number in the new buffer could
        be one that preceded the currently required one.
        Unfortunately, the pointer was set to the first in the new
        buffer always.  This led to wrong baseline data being included
        in the output record.  Raised the search region and made sure
        it did not search over empty records and made the pointer aim
        at the desired record.
        2. On AT tables, the task asks for a SOURCE column that is not
        present in the table and so quit on AT tables.  Added a
        spexcial error test for this, allowing it to procede normally
        since the copy can handle a missing selection column.
        3. The handling of character-data columns was incorrect.  So
        far as I can tell, the error only damaged CQ tables.
        Corrected all the length handling for character-valued columns
        of 1 or more dimensions (includes AT, CT, and SU tables).
        Moved to 31DEC08 this date.

12778.  December 26, 2008         ACFIT                 Eric
        Was setting CLVER not CLUSE from adverb GAINUSE and so always
        applied the highest CL table.
        Moved to 31dEC08 this date.

12779.  December