[daip] FITLD problem
Amy Mioduszewski
amiodusz at nrao.edu
Tue Aug 26 16:11:35 EDT 2008
Hi Gabi,
I doubt this is a FITLD problem. Could you do a TASAV on your file and send the
saved tables to me. I want to check out the FG table. Also, how do you know
for sure that the flags are not being applied to IF2?
Amy
gcastell at iafe.uba.ar wrote:
> Dear all,
>
> I am processing data using 31DEC08 version. I have installated this version
> using Debian 3.1 with a compilator GCC3.X.
> I use FITLD to store my uv file which has two IF and 1 FG table. The
> problem is that when I plot the data using UVPLT, AIPS only seems to see
> the flags made on IF-1. Of course the FG table also includes a lot of
> flags for IF-2, but this is not taken into account when I plot the uv data
> with bif 2 eif 2 flagver 1. I don't understand what is wrong! I will be
> very gratefull if you could help me with this.
>
> thank you very much!
> Gabi
>
>
> The inputs used in FITLD were
>
> INTAPE 1 Input tape drive # (0 => 1)
> AIPS 2: NFILES 0 # of files to advance on tape
> AIPS 2: INFILE 'FITS:IC443/AG697/IC443 Disk file name
> AIPS 2: -4AB.SPLIT.1.FITS'
> AIPS 2: OUTNAME 'IC443-4AB' File name (name)
> AIPS 2: OUTCLASS 'SPLIT' File name (class)
> AIPS 2: OUTSEQ 0 File name (seq. #)
> AIPS 2: 0 => highest unique number
> AIPS 2: => matching (on VLBA) AIPS
> 2: -1 => FITS tape value AIPS 2:
> OUTDISK 4 Disk drive # (0 => any) AIPS 2: OPTYPE
> ' ' Type of data to load,
> AIPS 2: ' ' => all types
> AIPS 2: 'UV' => UV data
> AIPS 2: 'IM' => images
> AIPS 2: NCOUNT 1 Number of files to load. AIPS
> 2: DOTABLE 1 True (1.0) means load tables AIPS 2:
> for images.
> AIPS 2: DOUVCOMP -1 >0 => compressed data (FITS)
> AIPS 2: DOCONCAT -1 >0 -> if VLBA or uv table, AIPS
> 2: append data to existing AIPS 2:
> files, or if no appropriate AIPS 2:
> files exist create a new file AIPS 2:
> and append all data to that AIPS 2:
> file.
> AIPS 2: *****************************
> AIPS 2: Following adverbs are useful
> AIPS 2: only when reading VLBA
> AIPS 2: distribution tapes.
> AIPS 2: *****************************
> AIPS 2: CLINT 0 CL entry interval (min) AIPS 2:
> 0 => 1 minute.
> AIPS 2: SOURCES *all ' ' Source list to accept.
> AIPS 2: QUAL -1 Source qualifier -1=>all AIPS
> 2: TIMERANG *all 0 Timerange selected
> AIPS 2: BCHAN 0 Lowest spectral channel AIPS 2:
> number to select in each IF. AIPS 2:
> 0=>1
> AIPS 2: ECHAN 0 Highest spectral channel AIPS
> 2: number to select in each IF. AIPS 2:
> 0=>highest
> AIPS 2: BIF 1 Lowest IF number 0=>1
> AIPS 2: EIF 2 Highest IF number 0=>all AIPS
> 2: DIGICOR 1 Controls the application of AIPS 2:
> the VLBA correlator's digital AIPS 2:
> correction.
> AIPS 2: 0 or 1 => perform corrections
> AIPS 2: 2 => perform cross-power AIPS
> 2: corrections, do total-power AIPS
> 2: only if zero padding used. AIPS 2:
> -1 => do NOT perform
> AIPS 2: corrections.
> AIPS 2: SEE HELP for more details AIPS
> 2: SELBAND -1 Bandwidth to select (kHz) AIPS 2:
> SELFREQ -1 Frequency to select (MHz). AIPS 2:
> See HELP.
> AIPS 2: FQTOL -1 Frequency tolerance assigned
> AIPS 2: to SELFREQ, FITLD will select
> AIPS 2: data with freq. of SELFREQ AIPS
> 2: +/- FQTOL.
> AIPS 2: The unit of FQTOL is kHz. AIPS
> 2: <=0 => 10 kHz
> AIPS 2: WTTHRESH 0 Flagging threshold based on
> AIPS 2: weights. See HELP.
> AIPS 2: 0 => no flagging
> AIPS 2: 1 => will flag ALL data AIPS 2:
> OPCODE ' ' Specify if wish to keep VT AIPS 2:
> (VLBA Tape Statistics) table AIPS 2:
> and other tables. See HELP. AIPS 2:
> ' ' => do not save tables AIPS 2: NPIECE 0
> Maximum uv table piece to AIPS 2: ERROR 1
> >= 2 -> do not use AIPS AIPS 2:
> history in the FITS file
>
>
>
>
>
> _______________________________________________
> Daip mailing list
> Daip at listmgr.cv.nrao.edu
> http://listmgr.cv.nrao.edu/mailman/listinfo/daip
>
More information about the Daip
mailing list