[daip] GC table error at APCAL
makoto.miyoshi at nao.ac.jp
makoto.miyoshi at nao.ac.jp
Mon Sep 24 09:30:40 EDT 2007
Dear sirs,
I met a trouble at APCAL, making SN table from GC + TY information.
Used APCAL is in AIPS-2007 version, I tried to make SN table
from GC and TY, but failed.
I also tested the APCAL in AIPS-2003 version but failed to make SN
table, too.
The UV data set are somewhat old ones, obeserved at 2001 to 2002,
taken from archive of BB130C, D,F, & G. They have 4-IF, both of R&L
channels.
I investigated the GC file (=output text file from TBOUT), but the table
seems OK, there are no strange value.
Could you help me ?
M. Miyoshi
NAOJ
****************RUN Time Messages**************************************
localh> APCAL1: Task APCAL (release of 31DEC07) begins
localh> APCAL1: Writing SN table 3
localh> APCAL1: GETGC: PARAMETER MAXVAL TOO SMALL: CONTACT AIPS ADMIN
localh> APCAL1: GCVAL: ERROR 3 LOADING GC TABLE
localh> APCAL1: GETGC: PARAMETER MAXVAL TOO SMALL: CONTACT AIPS ADMIN
localh> APCAL1: GCVAL: ERROR 3 LOADING GC TABLE
localh> APCAL1: GETGC: PARAMETER MAXVAL TOO SMALL: CONTACT AIPS ADMIN
localh> APCAL1: GCVAL: ERROR 3 LOADING GC TABLE
localh> APCAL1: GETGC: PARAMETER MAXVAL TOO SMALL: CONTACT AIPS ADMIN
localh> APCAL1: GCVAL: ERROR 3 LOADING GC TABLE
localh> APCAL1: AMPCAL: NO GAIN FOR ANT: 1 POL: 1 IF: 1
localh> APCAL1: Purports to die of UNNATURAL causes
localh> APCAL1: localhost 31DEC07 TST: Cpu= 0.0 Real= 0
*****************Parameters in APCAL**********************************
>inp
AIPS 1: APCAL Task to generate an amplitude calibration SN table
AIPS 1: Adverbs Values Comments
AIPS 1: ----------------------------------------------------------------
AIPS 1: INNAME 'BB130C' Input UV file name (name)
AIPS 1: INCLASS 'UVSRT' Input UV file name (class)
AIPS 1: INSEQ 1 Input UV file name (seq. #)
AIPS 1: INDISK 2 Input UV file disk unit #
AIPS 1:
AIPS 1: ANTENNAS *all 0 Antennas to calibrate
AIPS 1: SUBARRAY 0 Subarray 0 -> 1
AIPS 1: STOKES ' ' Stokes type ('R','L',' ')
AIPS 1: BIF 0 Start IF number
AIPS 1: EIF 0 End IF number
AIPS 1: FREQID 1 Freq. ID to calibrate
AIPS 1: SOURCES *all ' ' Sources to calibrate
AIPS 1: TIMERANG *all 0 Time range to calibrate
AIPS 1:
AIPS 1: TYVER 1 TY table version number.
AIPS 1: GCVER 1 GC table version number.
AIPS 1: SNVER 0 Output SN table version.
AIPS 1: 0 -> highest unique
AIPS 1: OPCODE ' ' Opacity correction opcode:
AIPS 1: ' ' -> no opacity corr.
AIPS 1: 'GRID','GRDR','OPAC','OPCR',
AIPS 1: 'LESQ' -> fit for opacity
AIPS 1: APARM *all 0 Calibration parameters:
AIPS 1: (1) -> B factor (def. 1.0)
AIPS 1: Opacity parameters:
AIPS 1: (2) -> ZA limit (deg)
AIPS 1: (3) >=0 use spillover
AIPS 1: correction
AIPS 1: (4) > 0 use all FQ in
AIPS 1: opac. soln.
AIPS 1: (5) Limit to sec(z) plotted
AIPS 1: SOLINT 0 Solution interval (min)
AIPS 1: 0 -> use all data
AIPS 1: INVERS 1 WX table version number.
AIPS 1: 0 -> use text file
AIPS 1: INFILE *all ' ' Text file with weather info.
AIPS 1: Must be ' ' if using WX
AIPS 1: table (INVERS).
AIPS 1: TRECVR *all 0 Receiver temperatures (K);
AIPS 1: in (R,L) pairs.
AIPS 1: TAU0 *all 0 Zenith opacities (per ant.)
AIPS 1: DOFIT *all 0 Fit type (per ant.)
AIPS 1: -1 -> no opacity correction
AIPS 1: 0 -> apply TRECVR only
AIPS 1: 1 -> solve for Trec using
AIPS 1: fitting method spec.
AIPS 1: in OPCODE; then apply
AIPS 1: PRTLEV 1 Print level
AIPS 1: DOTV -1 TV selection (<0 -> PL file)
AIPS 1: LTYPE 3 Plot labeling
AIPS 1: GRCHAN 0 TV Graphics channel to use
More information about the Daip
mailing list