[daip] FILLM MCWAIT message: what does this mean?
Eric Greisen
egreisen at nrao.edu
Mon Sep 10 18:08:43 EDT 2007
mrupen at nrao.edu writes:
> Hi DAIP --
> FILLM on a P-band spectral line experiment (mode 4) gave the following:
> FILLM1: MCWAIT: Factor error; C( 2)= 0.667E-10 * C( 6)= 0.147E+00
The nominal sensitivity of antenna 2 is 10^10 or so. The data
have been flagged.
> FILLM1: MCWAIT: IF = 2, FREQ = 1, IS = 1, STRM= 2
> FILLM1: MCWAIT: IF inc= 90, FREQ inc= 3, POL inc= 45
> FILLM1: MCWAIT: Factor error; C( 2)= 0.667E-10 * C( 6)= 0.147E+00
> FILLM1: MCWAIT: IF = 2, FREQ = 2, IS = 1, STRM= 2
> FILLM1: MCWAIT: IF inc= 90, FREQ inc= 3, POL inc= 45
> FILLM1: MCWAIT: Factor error; C( 2)= 0.667E-10 * C( 6)= 0.147E+00
> FILLM1: MCWAIT: IF = 2, FREQ = 3, IS = 1, STRM= 2
> FILLM1: MCWAIT: IF inc= 90, FREQ inc= 3, POL inc= 45
> FILLM1: MCWAIT: Factor error; C( 2)= 0.667E-10 * C( 6)= 0.147E+00
> FILLM1: MCWAIT: IF = 2, FREQ = 4, IS = 1, STRM= 2
> FILLM1: MCWAIT: IF inc= 90, FREQ inc= 3, POL inc= 45
>
> Is this something I should track down, or something I can ignore?
It only tells you this 4 times and then suppresses the messages.
Eric Greisen
More information about the Daip
mailing list